Resource Type
Partner
Collection
Office of Scientific & Technical Information Technical Reports
1,782
Congressional Research Service Reports
1,462
Technical Report Archive and Image Library
306
Government Accountability Office Reports
237
National Advisory Committee for Aeronautics Collection
170
TRAIL Microcard Collection
104
Texas State Publications
35
John F. Kennedy Memorial Collection
11
John F. Kennedy, Dallas Police Department Collection
11
Harris and Eliza Kempner
11
16 More
Country
States
Decade
Month
Day
Language
Results:
1 - 24 of
3,883
next
3(omega) Damage: Growth Mitigation
The design of high power UV laser systems is limited to a large extent by the laser-initiated damage performance of transmissive fused silica optical components. The 3{omega} (i.e., the third harmonic of the primary laser frequency) damage growth mitigation LDRD effort focused on understanding and reducing the rapid growth of laser-initiated surface damage on fused silica optics. Laser-initiated damage can be discussed in terms of two key issues: damage initiated at some type of precursor and rapid damage growth of the damage due to subsequent laser pulses. The objective of the LDRD effort has been the elucidation of laser-induced damage processes in order to quantify and potentially reduce the risk of damage to fused silica surfaces. The emphasis of the first two years of this effort was the characterization and reduction of damage initiation. In spite of significant reductions in the density of damage sites on polished surfaces, statistically some amount of damage initiation should always be expected. The early effort therefore emphasized the development of testing techniques that quantified the statistical nature of damage initiation on optical surfaces. This work led to the development of an optics lifetime modeling strategy that has been adopted by the NIF project to …
Date:
February 22, 2001
Creator:
Kozlowski, M; Demos, S; Wu, Z-L; Wong, J; Penetrante, B & Hrubesh, L
System:
The UNT Digital Library
3(omega) Power Balance Procedure on the NIF
This document defines the detailed NIF full system shot procedure to obtain 8% power balance as specified by the SDR002 3.2.1.04. Because the 48 quads of the NIF will be set up over a period of five years, obtaining power balance will naturally be accomplished in two steps. First, as each quad is brought online, the four laser beams within each quad will be tuned by setting the PABTS splitter ratios so that each beam will give the same laser power on target during low energy square pulse shots. During the quad activation period all of the technical tools and procedures will be developed that are needed for attaining full laser power balance. After the initial settings of the 48 PABTS, if no other tuning is done the overall NIF power balance is expected to be about <15%. In the second step, an iteration procedure with approximately 18 full laser system shots will be needed to obtain 8% power balance by tuning out the remaining systematic differences among the quads to an acceptable small difference of 2% rms (at 3{omega}). This rms difference is smaller than the expected variation of the injection energy or the amplifier gain, and is also …
Date:
January 22, 2001
Creator:
Glenzer, S.; Jones, O.; Speck, D. R.; Munro, D.; Lerche, R.; Salmon, T. et al.
System:
The UNT Digital Library
3 Plant Radiation Study Interim Report #5- Part II Data on Gamma Shielding of Special Plutonium Samples
The calculation of shielding the thickness for plutonium is complicated by the many different energies represented in the gamma radiation emitted during decay of the plutonium isotopes. Dose rate predictions are also frequently confused by gamma from varying content of fission product impurities in the plutonium, as well as other gamma radiation induced through alpha and neutron particle absorption within the source material or its environment. After assumptions are made for these many factors the radiation data for shielding determination is still frequently inadequate because of wide variations in dose rates resulting from self-absorption. The degree if self-shielding is in turn dependent on nature of the plutonium compound, degree of compactness, weight, and over-all geometrical distribution of the source material. By preparing a variety of plutonium samples representing combinations of these varying factors, actual dose rates and gamma spectra, as obtained from them, can then be extrapolated for application to specific situations.
Date:
October 22, 1959
Creator:
Moulthrop, H. A.
System:
The UNT Digital Library
The 7 by 10 Foot Wind Tunnel of the National Advisory Committee for Aeronautics
This report presents a description of the 7 by 10 foot wind tunnel and associated apparatus of the National Advisory Committee for Aeronautics. Included also are calibration test results and characteristic test data of both static force tests and autorotation tests made in the tunnel.
Date:
October 22, 1931
Creator:
Harris, Thomas A.
System:
The UNT Digital Library
The 9/11 Commission and a National Counterterrorism Center: Issues and Options for Congress
This report examines a number of issues as Congress considers codification of an NCTC. One issue is whether the centralization remedy the commission has recommended fits the problems associated specifically with the 9/11 intelligence failure, and perhaps more broadly, the systematic maladies affecting the Intelligence Community. There are at least four options for congressional consideration: (1) NCTC with intelligence and operational planning duties, (2) NCTC restricted to an intelligence role, (3) NCTC restricted to an operational planning role, and (4) status quo plus-viewing the newly forming collected entity as a pilot potential NCTC. As one of its 41 recommendations, the 9/11 Commission recommended the creation of a National Counterterroism Center (NCTC).
Date:
October 22, 2004
Creator:
Masse, Todd
System:
The UNT Digital Library
9/11 Commission Recommendations: A Civil Liberties Oversight Board
This report discusses the recommendation made by the National Commission on Terrorist Attacks Upon the United States (9/11 Commission) regarding the creation of a board within the executive branch to oversee adherence to guidelines on, and the commitment to defend, civil liberties by the federal government.
Date:
December 22, 2004
Creator:
Relyea, Harold C.
System:
The UNT Digital Library
9/11 Commission Recommendations: A Civil Liberties Oversight Board
From Summary: This report discusses recommendations made by the National Commission on Terrorist Attacks Upon the United States (9/11 Commission) which include: "creation of a board within the executive branch to oversee adherence to guidelines on, and commitment to defend, civil liberties by the federal government."
Date:
December 22, 2004
Creator:
Relyea, Harold C.
System:
The UNT Digital Library
9/11 Commission Recommendations: The Senate Confirmation Process for Presidential Nominees
On July 22, 2004, the National Commission on Terrorist Attacks Upon the United States, known as the 9/11 Commission, issued its final report, detailing the events up to and including the September 11, 2001 terrorist attacks upon the United States. The 9/11 Commission recommended that the Senate adopt rules requiring hearings and votes to confirm or reject national security nominees within 30 days of their submission at the start of each new presidential administration. Implementing the commission's proposal would involve imposing new restrictions on both the power of committee chairs to control the agenda of their committees and the rights of Senators to delay or block nominations through holds and extended debate. This report discusses in detail this proposal, how it could be implemented, and the potential effects of its implementation.
Date:
November 22, 2004
Creator:
Palmer, Betsy
System:
The UNT Digital Library
S-20 photocathode research activity. Part I
The goal of this activity has been to develop and implement S-20 photocathode processing techniques at Lawrence Livermore National Laboratory (LLNL) in order to study the physical properties of the photocathode films. The present work is the initial phase of a planned activity in understanding cathode fabrication techniques and the optical/electrical characterization of these films.
Date:
November 22, 1983
Creator:
Gex, F.; Huen, T. & Kalibjian, R.
System:
The UNT Digital Library
45-Day safety screen results and final report for Tank 241-SX-113, Auger samples 94-AUG-028 and 95-AUG-029
This document serves as the 45-day report deliverable for tank 241-SX-113 auger samples collected on May 9 and 10, 1995. The samples were extruded, and analyzed by the 222-S Laboratory. Laboratory procedures completed include: differential scanning calorimetry; thermogravimetric analysis; and total alpha analysis. This report incudes the primary safety screening results obtained from the analyses. As the final report, the following are also included: chains of custody; the extrusion logbook; sample preparation data; and total alpha analysis raw data.
Date:
June 22, 1995
Creator:
Sasaki, L.M.
System:
The UNT Digital Library
100 Area D4 Project Semi-Annual 2006 Building Completion Report, August 2005 - April 2006
This report documents the decontamination, decommissioining (D&D) and the demolition of select facilities in the 100 Area of the Hanford Site as required by DOE G 430.1-4.
Date:
June 22, 2006
Creator:
Griff, B. C.
System:
The UNT Digital Library
100 area weekly report - June 22, 1955
None
Date:
June 22, 1955
Creator:
unknown
System:
The UNT Digital Library
100 Areas technical activities report: Engineering, August 1947
There were seven charges of metal inspected during the month for corrosion and blistering studies. There were no unusual cases of blistering noted and the corrosion rates were normal for this time of year. Borescopic examination of the graphite packing around the ``B`` Hole in the F Pile revealed that the graphite is no more severely cracked than in the D Pile when it was inspected about a year ago. Examination of the graphite at the downstream and of Tube 1385-D did not indicate that any damage had been done by the leak in that tube. Forty one tubes have been charged in the F Pile on Production Test 105-90-P, ``Exposure of TX Metal Slugs.`` The routine job of taking vertical bowing measurements was turned over to the Instrument Department after working with them once in each Area. Installation of Van Stone test units was completed and a brief run was started. Van Stone flanges at both ends of 64 process tubes in both the B and F Piles were measured with a micrometer to determine the minimum amount of metal remaining.
Date:
September 22, 1947
Creator:
Woods, W. K.
System:
The UNT Digital Library
100 Areas technical activities report: Physics, July 1949
The pile physics group reports on reactivity power coefficients from the production test No. 105-248-P, the water leak in B pile, graphite properties, xenon equations from the B pile shutdown of March 1946, and reactivity balance. The experimental physics group headed by J.M. West reports on graphite testing, the P-11 project, and shielding. The experimental physics group headed by E.B. Montgomery reports on diffusion length measurements in the DR and H piles. (GHH)
Date:
August 22, 1949
Creator:
Staebler, U. M.
System:
The UNT Digital Library
100-F area unit purge, May 3, 1945
This report discusses the pressure drop on the 100-F unit, as measured on the eight pressure drop tubes, which had increased to 24 lbs./in.{sup 2} above base by May 2. The unit was shut down on May 3 to purge with 50 ppm solids for 1.1 hr. and to take care of necessary maintenance work.
Date:
May 22, 1945
Creator:
Kiddker, C. P.
System:
The UNT Digital Library
100-K Area electrical power system load and voltage study for project CG-775. Revision
The proposed increased water capacity for 100-K plants will increase the electrical load to be supplied. The load study showed that the capacity of the existing 13.8 kV system is adequate to carry the increased loads proposed for Project CG-775, while for the 5 kV system, an expanded power system is proposed. Likewise, the voltage regulation on the kV system bus will be excessive, and voltage regulators should be added.
Date:
February 22, 1960
Creator:
Thorson, W. R.
System:
The UNT Digital Library
AZ-101 Mixer Pump Demonstration and Tests Data Management Analysis Plan
This document provides a plan for the analysis of the data collected during the AZ-101 Mixer Pump Demonstration and Tests. This document was prepared after a review of the AZ-101 Mixer Pump Test Plan (Revision 4) [1] and other materials. The plan emphasizes a structured and well-ordered approach towards handling and examining the data. This plan presumes that the data will be collected and organized into a unified body of data, well annotated and bearing the date and time of each record. The analysis of this data will follow a methodical series of steps that are focused on well-defined objectives. Section 2 of this plan describes how the data analysis will proceed from the real-time monitoring of some of the key sensor data to the final analysis of the three-dimensional distribution of suspended solids. This section also identifies the various sensors or sensor systems and associates them with the various functions they serve during the test program. Section 3 provides an overview of the objectives of the AZ-101 test program and describes the data that will be analyzed to support that test. The objectives are: (1) to demonstrate that the mixer pumps can be operated within the operating requirements; (2) …
Date:
February 22, 2000
Creator:
Douglas, D. G.
System:
The UNT Digital Library
105-DR Large Sodium Fire Facility closure activities evaluation report
This report evaluates the closure activities at the 105-DR Large Sodium Fire Facility. The closure activities discussed include: the closure activities for the structures, equipment, soil, and gravel scrubber; decontamination methods; materials made available for recycling or reuse; and waste management. The evaluation compares these activities to the regulatory requirements and closure plan requirements. The report concludes that the areas identified in the closure plan can be clean closed.
Date:
April 22, 1996
Creator:
Adler, J. G.
System:
The UNT Digital Library
190-C pump capacity
The purpose of this document is to update 190-C pump capacity information previous released in HW-52449{sup 1} and HW-58580{sup 2}. Improvements in motor cooling has resulted in raising the previous 3500 HP limit to 3660 HP{sup 3} thus increasing total pumping capacity.
Date:
June 22, 1959
Creator:
Watson, D. F.
System:
The UNT Digital Library
200 area weekly report
None
Date:
December 22, 1955
Creator:
unknown
System:
The UNT Digital Library
234-5 Project specification letter 234-41, 235-41 (Supplement D), Chemical Development Laboratory
This letter itemizes the miscellaneous equipment and supplies not previously specified which should be ordered to equip the 234-5 Chemical Development Laboratory. Equipment currently carried in store stock is not included in this list. The vendor is given only to identify the item or as a suggested source of supply.
Date:
October 22, 1948
Creator:
Work, J.B.
System:
The UNT Digital Library
234-5 Remote mechanical line design bases and schedules
None
Date:
August 22, 1949
Creator:
Gross, C.N.
System:
The UNT Digital Library
241-A evaporator flowsheet users manual
This supporting document presents a description of the 242-A Evaporator flowsheet. Material balances are calculated for feed, slurry, and effluent streams based on input data for the feed stream.
Date:
December 22, 1994
Creator:
Larrick, A. P.
System:
The UNT Digital Library
300 Area, February 12 through February 18
Extrusion was run on one day, February 2, and a total of 271 billets (178 Type G, 12 type BT, and 81 red band) were processed. Two failures occurred among the red band billets; UM 6610 had begun to melt in the furnace and TX 3323 disintegrated on being extruded through the die. Samples of these billets are being checked chemically and metallurgically in an attempt to ascertain the cause for the hot-short characteristics of these billets. A sample cut from a rod which possessed zero strength (fell apart under no stress other than its own weight) at extrusion temperature was found to contain a large amount of microconstituent not ordinarily found in appreciable quantity on uranium sections. The distribution and appearance of the excess phase suggested at least partial liquation at the working temperature and it could, therefore, be responsible for the hot-short tendency.
Date:
February 22, 1946
Creator:
unknown
System:
The UNT Digital Library