From abstract: "An investigation of the radiation stabilities of aqueous solutions of sodium ethylenediamine tetraacetate and sodium acetate was made using a 3000-curie Co⁶⁰ source...A study of the behavior of the standard-size Beckman type glass pH electrodes in a solution containing 0.36 curie of Ce¹⁴⁴-Pr¹⁴⁴ activity per milliliter showed the useful electrode life to be of the order of two to eight days."

Annual report submitted by the Boy Scouts of America to Congress describing highlights from 1951, activities, public relations, programming, finance, organizational leadership, and other information about scouting programs.

Report presenting the results of an investigation of flap-type controls on a low-aspect-ratio triangular wing using NACA 0005-63 sections for a constant-chord and a constant-percent-chord control surface. Two flap profiles were investigated: one with a true contour and the other with a blunt trailing edge. Results regarding lift, drag, pitching moment, hinge moment, and rolling moments were obtained for several Mach numbers, a constant Reynolds number, and a range of angles of attack.

This document is a compilation of obsolete security codes, convenience codes and local jargon in use, or previously used, at Hanford Works. It is compiled to aid readers in understanding the Hanford report literature, particularly that originated in the early years of the Project.

None

Thorium Research. The effect of quenching temperature on the hardness of Th--C alloys is described. The effect of quenching temperature and oxygen content on the hardness of Th--O, alloys is discussed. The effects of Be, Cr, and C additions on the properties of pure Th are described. The mechanical properties, recrystallization, and fabrication of Th are given. Preferred Orientation of Uranium. Fabricating conditions, preferred orientation, and examination of alpha-extruded U rods are given. The creep rate of beta-treated normal U and of extruded Th is given. Properties of some high-temperature brazing alloys are given. Welding conditions are given for cone-arc welding of stainless steel tube-to-header joints. Homogeneous Reactor Program. Analysis of various compacts containing B/sub 4/C are given. Preliminary work on the variables involved in welding Ti was started. Experimental work to determine the effects of various impurity elements on the impact properties of Ti and Zr was started. A metallographic examination of Ames Th cold worked and annealed for 60 minutes is presented. Experimental Plate-Cladding Program. The cladding of Th and U with Zr is discussed at length. The cladding of Th with Al is described. Experiments on welding of Th, U, and Zr plates are presented. (W.L.H.)

A method is described for the preparation of PuF/sub 3/ by means of a solid phase-gas reaction between Pu(IV) oxatate or Pu(III) oxalate and Freon-type compounds such as CC1/sub 2/F/sib 2/. (auth)

Introduction: "Based on experimental data and on conservative theoretical considerations, an estimate has been made of the relation of the mining U-235 critical mass to the hydrogen moderation for uranium material at the U-235 assays for which experimental information is available. These estimates have been used in indicating maximum safe amounts for conditions where definite moderation limitations can be established."

This constitutes a review of the path of carbon in photosynthesis as it has been elaborated through the summer of 1952, with particular attention focused on those aspects of carbon metabolism and i t s variation which have led to some direct information regarding the primary quantum conversion act. An introduction to the arguments which have been adduced in support of the idea that chlorophyll i s a physical sensitizer handing i t s excitation on to thioctic acid, a compound containing a strained 1, 2 -dithiolcyclopentane ring, i s given.

This report presents "Results of a critical literature review on pressure drop due to isothermal turbulent flow in noncircular geometries" (introduction).

The following report provides the results of an accelerated corrosion test that was performed to compare the effect of two coagulants on the corrosion rates of aluminum slug jacket alloy and 72S. Additionally, some analytical data on the water from the two treatments were obtained and are presented in this report.

The amount of hydrogen normally present in zirconium and zirconium alloys suffices to reduce their ductility greatly in an impact test at room temperature, after slow cooling from 6OO deg F. Quenching from 6OO deg F or above gives high impact strength, as does removal of hydrogen by hightemperature vacuum aanealing. The evidence on hydrogen embrittlement, the diffusion, solid solubility, and equilbrium pressure of hydrogen in zirconium the microstructure, and the effects of hydrogen and heat treatment on the mechanical properties of zirconium are discussed. (auth)

Abstract: "The amount of hydrogen normally present in zirconium and zirconium alloys suffices to reduce their ductility greatly in an impact test at room temperature, after slow cooling from 600 F. Quenching from 600 F or above gives high impact strength, as does removal of hydrogen by high-temperature vacuum annealing. This report discusses the evidence on hydrogen embrittlement, the diffusion, solid solubility, and equilibrium pressure of hydrogen of hydrogen in zirconium, the microstructure, and the effects of hydrogen and heat treatment on the mechanical properties of zirconium."

Report presenting effects of wing trailing-edge bluntness on aerodynamic characteristics of a wing-body combination at a range of Mach numbers and Reynolds numbers. Modifications were made to the rear half of a basic plane tapered wing of aspect ratio 3.1 and a 3-percent-thick, circular-arc, biconvex section with three types of trailing-edge shapes. Results regarding the lift characteristics, pitching-moment characteristics, drag characteristics, and maximum lift-drag ratio are provided.

This quarterly progress report discusses ongoing work at the Metallurgy Division at the Oak Ridge National Laboratory. Topics discussed include thorium research, the preferred orientation of uranium, studies in the ceramics laboratory, the homogenous reactor program, studies in the x-ray laboratory, studies in the metallographic laboratory, the experimental plate-cladding program, and fuel and control element fabrication.

The leaching behavior, thickening and filtering characteristics and recovery of uranium from high grade uranium ore from Rum Jungle, Northern Territory, Australia are described.

Report presenting testing of a shielded total-pressure tube with a curved venturi entry in order to obtain the variation of total-pressure error with angle of attack from a range of 0 to 60 degrees and for a range of Mach numbers. The critical angle was found to vary from about 57 degrees at Mach number 0.90 to 56 degrees at Mach number 1.10.

Report presenting an investigation of the performance of several conical cooling-air ejectors at primary jet pressure ratios from 1 to 10, secondary shroud pressure ratios from 0.60 to 4.00, and primary to secondary temperature ratio of 1.0. The investigation centered on primary air flow, secondary air flow, primary nozzle thrust, and gross ejector thrust.

From Summary: "Ogive-cylindrical fuselages of fineness ratio 11 have been flight-tested with and without stabilizing fins. Base-pressure measurements over a range of free-stream Mach numbers from 0.7 to 1.3 indicated that the fins reduced the base drag. A rear-support sting similar to those used in wind tunnels was tested with one of the fuselages and found to reduce base suction by 40 percent at subsonic speeds, but to have little effect at Mach numbers above 1.15."

None

Report presenting an investigation of the effect of Reynolds number and the addition of leading-edge roughness on the aerodynamic characteristics of wings with aspect ratio 1, 2, and 3, a rectangular plan form, square-cut wing tips, and NACA 0012 airfoil sections. Results regarding lift and moment, lift-curve slope, and maximum lift are provided.

None

In solving the two-group, two medium equations for neutron diffusion in a finite one-dimensional multiplying system, the equations in each medium can be solved, and the boundary conditions used to determine the coefficients. This direct attack involves eight simultaneous linear equations. The opportunities for error are numerous, and, frequently, a great deal of accuracy is lost by subtractions; hence, it is felt that an alternative method of solution, in which numerical errors would be less likely to occur, would be desirable.

None