Report presenting testing of a twin-duct air-intake system mounted on the sides of a fuselage forebody model at free stream Mach numbers of 1.5 and 2.0 over angles of attack and yaw. Results regarding the inlet survey, compression-surface boundary-layer removal and effects of second-ramp position, instability, effect of cant on inlet performance, inlet performance with 0 degree and 30 degree second-ramp angles, performance with fixed second-ramp angles, and effect of canards are provided.

Memorandum presenting the results of experimental and theoretical data on nine cowls to determine the effect of initial lip angle and projected frontal area on the cowl pressure drag coefficient at Mach numbers from 1.90 to 3.88. Results regarding the surface pressure coefficients, pressure distributions, effect of lip angle, projected cowl area, and Mach number on the cowl pressure drag coefficients are provided.

Report presenting an investigation in the high-speed tunnel to determine the effect of spin on the aerodynamic characteristics of a 60-millimeter T-24 mortar shell with several different tail-fin configurations. Tests were made at a range of airspeeds, speeds of rotation, and angles of attack. Results regarding forced-spin tests, free-spin tests, and zero-spin tests are provided.

Report presenting an investigation of an inlet with combined external and internal supersonic compression, formed by spike and cowl oblique shocks, and an overall length of 2.5 inlet diameters at a range of Mach numbers over a range of angles of attack. With proper boundary layer control on the centerbody, this method of internal compression did not adversely affect the high performance of the inlet.

"The performance of a 2.8 KS 8100 Cajun solid-propellant rocket motor has been determined from the free-flight test of a single-stage model which reached a velocity of 5,268 feet per second (Mach number, 4.74). Thrust data from the flight test are compared with data obtained from a ground firing test made by the manufacturer and the two are shown to be in agreement." Report presenting general drag, data, and acceleration are also provided.

Report presenting testing of a highly polished 9-inch-diameter hemisphere-cylinder in flight in order to obtain boundary-layer transition and heat-transfer data. Results regarding the free-stream conditions, pressure measurements, temperature measurements, heat-transfer measurements, and transition and transition parameters are provided.

A modified corrugated-insert blade with integrally cast shell and base was developed. This blade was as light as a conventional fabricated corrugated-insert blade. Of four test blades operated in a full-scale turbojet engine, one failed after about 15 hours operation at an inlet gas temperature of 1670 degrees F, a coolant-flow ratio of 0.0064, and a 1/3-span centrifugal stress of approximately 28,000 psi. Three other test blades ran for approximately 16, 31, and 36 hours without failure at similar conditions.

Report presenting the basic performance characteristics of several types of designs of subsonic-diffuser-bypass-duct combinations for bypass flows up to one-third of the total flow. The tested bypass-duct design procedure was found to be greatly oversimplified and was unable to produce satisfactory performance because of the extreme adverse pressure gradient.

Report discussing an investigation to determine the effect of spin on the aerodynamic characteristics of the Army Ordnance Corps 60-millimeter T-24 mortar shell with several tail-fin configurations. Tests were performed at several airspeeds, speeds of rotation, and angles of attack. Under all test conditions, the models were statistically stable and the yawing moment increased with speed of rotation at higher angles of attack.

Memorandum presenting an investigation in the supersonic pressure tunnel at a free-stream Mach number of 2.01 and at angles of attack up to 15 degrees of the static pressures and boundary-layer characteristics on the forward parts of nine fusleages of various cross-sectional shapes. Results regarding the static pressure distributions, boundary-layer characteristics, and selection of fuselage shapes for use with top-mounted scoop inlets are provided.

"The performance of a full-scale translating-spike inlet was obtained at Mach numbers of 1.8 and 2.0 and at angles of attach from 0 deg to 6 deg. Comparisons were made between the full-scale production inlet configuration and a geometrically similar quarter-scale model. The inlet pressure-recovery, cowl pressure-distribution, and compressor-face distortion characteristics of the full-scale inlet agreed fairly well with the quarter-scale results" (p. 1).

Report presenting testing of the performance of a twin-duct air-intake system mounted on the sides of a 1/8-scale fuselage forebody model of a proposed aircraft at several Mach numbers, angles of attack, and yaw. Results regarding the inlet survey, compression-surface boundary-layer removal and effects of second-ramp position, instability, effect of cant on inlet performance, inlet performance with 0 and 30 degree second ramp angles, performance with fixed second-ramp angles, and effect of canards are provided.

From Summary: "Four solid-propellant rocket engines of nominal 500-pound thrust were tested for starting characteristics at pressure altitudes ranging from 89,000 to 111,000 feet and at a temperature of -75^o F. Chamber pressures were measured on two of the runs. Average chamber pressures in these two runs were lower than expected, although action times agreed with the expected values."

Memorandum presenting an analysis to determine, for control design purposes, the approximate response of pressures in the ramjet engine to changes in fuel flow. In the first part, the response after dead time is treated by the linearized lumped-parameter method. In the second, the dead time occurring between the change in fuel flow and the beginning of the pressure response is discussed.