Disposal on a specific retention basic of certain radioactive liquid waste solutions emanating from separations from separations plants has been practiced at Hanford since 1944. As used at Hanford, the term "specific retention" is defined as that volume of waste liquids that may be disposed to the soil* and be held against the force of gravity by the molecular attraction between sand grains and the surface tension of the water, when expressed as percent of packed soil volume. In practice it represents the volume of liquid that may be discharged to a disposal pit of known dimensions without leakage to the ground, water, expressed as percent of the total volume of a column of soil with the same cross section as the pit, and extending from the bottom of the pit to the water table. It is recognized that some degree of lateral spreading will occur which has the effect of enlarging the volume of soil contacted by the liquid.

An empirical approach for the evaluation of shielding materials for macrochemical manipulations of spontaneously fissioning heavy elements (curium and californium) has revealed interesting comparisons. High-density metal halide solutions were compared with lead glass and with rare earth glass for use as shielding windows. Laminated shields of lead-paraffin and uranium-paraffin were compared with water and with paraffin for shielding walls.

Unclassified experimental data concerned with the oxidation characteristics of Nb and Nb-base alloys are presented. The bulk of the results is presented in tabular form and cataloged under laboratory name sub-headings. The theory of alloy development for oxidation resistance is discussed. Methods of evaluating oxidation behavior are outlined.

"Centrifugal-casting techniques were investigated as a method of producing hollow cylindrical extrusion billets of aluminum-35 w/o uranium. Among the variables evaluated were melt temperature, mold and pouring-spout configurations, mold speed, and method of pouring. With the equipment employed it was found that the best castings were produced stilizing a pouring temperature of 2400 F, a heavy-walled steel cylinder rotating between 700 to 900 rpm for the mold and bottom-pouring technique employing a retractable pouring spout. Sound, nonporous billets 26 in. long and 5 in. in diameter were produced with a yield after machining of over 75 per cent of the original charge. The major losses occurred in the pouring spout-and-cup assembly. This loss is relatively unaffected by the casting length; and, therefore, coatings of greater length than 26 in. should results in even greater recoveries.

This report presents the description and safeguard evaluation of an open pool research and test reactor rated at one megawatt. The reactor is being proposed by the General Electric Company to the Rhode Island and Providence Plantation Atomic Energy Commission.

Different methods of decontaminating plutonium contaminated skin were studied by contamination localized areas of pig skin and then testing the different decontamination methods. Results indicate that the most effective of the decontamination methods tested involved the application of a plastic adherent material to the skin and its later removal by peeling.

The Interim Power Fuels Reprocessing Program, as established by the Atomic Energy Commission, provides the service of recovering uranium, thorium, plutonium, etc., from irradiated fuels discharged from non-production reactors of both public and private ownership. To provide this service on an interim basis and at minimum capital investment, the Commission has assigned the processing responsibility for the various fuel types to several AEC sites. The sites are to be assigned fuel types most similar to their normal production. As a result, HAPO has been assigned the responsibility for processing the low enrichment uranium and uranium oxide type fuels with isotopic content up to 5% uranium-235. In addition, some plutonium base fuels will be processed at Hanford.

The diffusion coefficient was calculated for the diffusion of Xe through Nb and found to be 0.064 exp (-18,600/RT).

An investigation was made of the neutron and gamma flux distribution along the entire length of a withdrawn control rod in the SRE in order to determine heating, activation and dose rates produced by the streaming neutrons and gammas.

The build up of contaminated film on the internal surfaces of high temperature in-reactor recirculating water loops has created serious radiation exposure problems to operational and maintenance personnel. A considerable amount of work has been applied to develop an effective decontamination process for the decontamination of these loops and their components.

A multi-purpose program for processing exponential data has been prepared for the 709 computer. The main purposes of the program is to compute the material buckling from raw data (given counts, time, and counter information) or from previously calculated Athermal's. It is also possible to compute only CeCh (end and harmonic corrections) for a given B11 or series if B11's no counting data being entered. In every case, pile measurements must be submitted as input for corrections.

Laboratory studies involving fluid flow through porous media require use of fluids having low dissolved gas content. Water is the major fluid used in various and box model and soil permeability studies carried out by the Geochemical and Geophysical Research group. Tap water supplied to the 222-U Bldg. contains a large amount of dissolved air. Under the reduced pressure encountered during model studies, the air is released from solution and gradually clogs the pores of the sand or other porous material. This, of course. leads to anomalous results and cannot be tolerated in precious studies. A system was required to effectively remove the air and make available a continuous supply of desired water for the model studies.

Introduction: "This is the eighth letter report on ARF Project C 127, entitled "Preliminary Studies of Scavenging Systems Related to Radioactive Fallout." This report covers the period from June 1 to August 1, 1959."

Nuclear and radiation hazards have been investigated for all phases of operation to be carried out in the mechanical decladding of SRE fuel elements. The SRE fuel is 2.8% enriched with a maximum burnup of 1,000 Mvd/ton and minimum cooling of 120 days. Each element contains 9 kg of uranium metal (~2 kg U-235) and is made up from 84 slugs (3/4"D x 6'"), clad with (10 mil wall) stainless steel tubing. It is planned to ship the fuel from Santa Susana, California, to Oak Ridge in the modified PAR loop carriers, with a maximum of 10 elements being shipped in each carrier per trip.

The Atomic Energy Commission has recently developed an enlarged program for the study of graphite moderated, gas cooled power reactor systems. It has been recognized, however, that understanding of radiation damage and radiation induced chemical reactions of graphite at the proposed high moderator temperatures is inadequate and that improved understanding is essential if the design of such reactors is to be optimized. Accordingly, the Atomic Energy Commission requested Hanford to organize a modest research and development program directed toward the study of these graphite problems.

The purpose of the test was to determine the internal temperature of the valve position detector for the 1A reactor inlet hydraulic valve with the plant at normal pressure and temperature and at power. The normal operating temperatures for the valve position detector on the 1A reactor inlet hydraulic valve range from a minimum of 287 F to a maximum of 294.7 F.