The nuclear radiations of nuclides: U{sup 233}, Pu{sup 239}, Bk{sup 243}, Bk{sup 244}, Bk{sup 245}, Bk{sup 246}, Bk{sup 249}, Cf{sup 249}, and Fm{sup 255} were investigated with high-resolution spectrometers. The {alpha}-particle spectra of all nuclides except Bk{sup 249} were measured with 6 mm diameter surface-barrier detectors. Bk{sup 249} {alpha}-particles were analyzed with a double-focusing magnetic spectrograph. The {gamma}-singles were examined with the recently developed Ge(Li) and Si(Li) detectors coupled with very-low noise 'internal FET' preamplifiers. Weak alpha groups were observed in coincidence with {gamma}-rays, detected with a NaI(Tl) scintillation spectrometer. To improve the over-all coincidence efficiency a new coincidence apparatus was designed and built. This instrument consisted of a cooled 4.5 cm diameter semiconductor detector for {alpha}-particle detection and a 3 cm diameter by 2.7 cm long Ge(Li) detector for {gamma}-ray analysis. The Ge(Li) detector could also be replaced with a NaI(Tl) detector. Cf{sup 249} conversion electrons were measured with a cooled Si(Li) detector coupled with an internal FET preamplifier. On the basis of the present work and previous information, energy-level diagrams of the daughter nuclei have been constructed. The levels have been grouped into rotational bands built on Nilsson single-particle states. Because of identification of several rotational members of …

We are becoming dependent on energy more today than we were a century ago, and with increasing world population and booming economies, sooner or later our energy sources will be exhausted. Moreover, our economy and welfare strongly depends on foreign oil and in the shadow of political uncertainties, there is an urgent need for a reliable, safe, and cheap energy source. Thermonuclear fusion, if achieved, is that source of energy which not only will satisfy our demand for today but also for centuries to come. Today, there are two major approaches to achieve fusion: magnetic confinement fusion (MFE) and inertial confinement fusion (ICF). This dissertation explores the inertial confinement fusion using the fast ignition concept. Unlike the conventional approach where the same laser is used for compression and ignition, in fast ignition separate laser beams are used. This dissertation addresses three very important topics to fast ignition inertial confinement fusion. These are laser-to-electron coupling efficiency, laser-generated electron beam transport, and the associated isochoric heating. First, an integrated fast ignition experiment is carried out with 0.9 kJ of energy in the compression beam and 70 J in the ignition beam. Measurements of absolute K{sub {alpha}} yield from the imploded core revealed …

The Standard Model describes with a very good accuracy all interactions of the, so far, known elementary particles. However the Higgs mechanism, which gives rise to the observed mass of these particles, has not yet been confirmed. The Higgs particle has not yet been observed, and the observation or exclusion is an important test of the Standard Model. The Standard Model does not predict the mass of the Higgs particle, however it does impose some limits on the range in which this mass can lie. In direct searches a Higgs with a mass smaller than 114.4 GeV and within 162 GeV and 166 GeV has been excluded at 95% CL at the LEP and the Tevatron colliders. The analysis presented in this thesis is aimed to search for the ZH → μμb$\bar{b}$ events in 3.1 fb^-1 of data collected with the DØ detector in p$\bar{p}$ collisions at √s = 1.96 TeV.

The work described in this dissertation has improved three essential components of extreme ultraviolet (EUV) lithography: exposure tools, photoresist, and metrology. Exposure tools. A field-averaging illumination stage is presented that enables nonuniform, high-coherence sources to be used in applications where highly uniform illumination is required. In an EUV implementation, it is shown that the illuminator achieves a 6.5% peak-to-valley intensity variation across the entire design field of view. In addition, a design for a stand-alone EUV printing tool capable of delivering 15 nm half-pitch sinusoidal fringes with available sources, gratings and nano-positioning stages is presented. It is shown that the proposed design delivers a near zero line-edge-rougness (LER) aerial image, something extremely attractive for the application of resist testing. Photoresist. Two new methods of quantifying the deprotection blur of EUV photoresists are described and experimentally demonstrated. The deprotection blur, LER, and sensitivity parameters of several EUV photoresists are quantified simultaneously as base weight percent, photoacid generator (PAG) weight percent, and post-exposure bake (PEB) temperature are varied. Two surprising results are found: (1) changing base weight percent does not significantly affect the deprotection blur of EUV photoresist, and (2) increasing PAG weight percent can simultaneously reduce LER and E-size in EUV …

YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) coated conductors are promising materials for large-scale superconductivity applications. One version of a YBCO coated conductor is based on ion beam assisted deposition (IBAD) of magnesium oxide (MgO) onto polycrystalline metal substrates. SrTiO{sub 3} (STO) is often deposited by physical vapor deposition (PVD) methods as a buffer layer between the YBCO and IBAD MgO due to its chemical stability and lattice mismatch of only {approx}1.5% with YBCO. In this work, some aspects of the stability of STO with respect to copper (Cu) and chemical solution deposition of STO on IBAD MgO templates were examined. Solubility limits of Cu in STO were established by processing Cu-doped STO powders by conventional bulk preparation techniques. The maximum solubility of Cu in STO was {approx}1% as determined by transmission electron microscopy (TEM) and Rietveld refinements of x-ray diffraction (XRD) data. XRD analysis, performed in collaboration with NIST, on powder compositions on the STO/SrCuO{sub 2} tie line did not identify any ternary phases. SrCu{sub 0.10}Ti{sub 0.90}O{sub y} buffer layers were prepared by pulsed laser deposition (PLD) and CSD on IBAD MgO flexible metallic textured tapes. TEM analysis of a {approx}100 nm thick SrCu{sub 0.10}Ti{sub 0.90}O{sub y} buffer layer deposited by …

Experimental studies of the relative atomic mu --meson capture probabilities in the constituents of chemical compounds are described. Fermi and Teller had predicted that the atomic-capture probability is proportional to the nuclear charge of the atomic species weighted by its atomic concentration. This is sometimes referred to as the Fermi-Teller Z law.'' Previous experiments indicated no clear systematics to this capture process, and there are conflicts between the results of several measurements made with the same or similar compounds. In these experiments the capturing atom was identified by detection of either mesic x rays or decay electrons from mu /sup -/ mesons bound in the mesic K shell in the atomic species, In these experiments oxides and sulfides of some medium- and high-Z elements as well as two metallic solutions were used, and a nuclear capture product (neutron) rather than the decay electrons was detected. Results show that among the substances examIned, namely CuO, Sb/sub 2/O/sub 3, PbO, CuS, Sb/sub 2/S/sub 3/, PbS AgLi, and CuAu, the Z law'' behavior is not indicated either in insulators or in metals, although in all cases there is a preference for capturing in the atom of higher Z. If the atomic-capture probability is …

This document is the third sub-report of the EUV AIM design study being conducted at LLNL on behalf of International Sematech (ISMT). The purpose of this study as identified in section 1.2 of the statement of work is to research the basic user requirements of an actinic defect characterization tool, potential design configurations and top-level specifications. The objectives of this design study specifically identified in section 1.3 of the statement of work were to: (1) Determine the user requirements of an actinic defect characterization tool; (2) Determine if an EUV AIM tool is an appropriate platform for actinic defect characterization; (3) Determine possible design configurations and top-level performance specifications; (4) Identify potential technical issues and risks of different technical approaches; (5) Provide estimates of cost relating to different technical approaches; and (6) Provide simulated performance for key subsystems and the entire system. The sub-sections of the study to be addressed were accordingly defined in the statement of work as being: (1) Formulation of top-level specifications; (2) Identification of system configurations suitable for meeting the top-level specifications; (3) Preliminary design of imaging systems; (4) Preliminary design of illumination systems; (5) Prediction and comparison of performance through aerial image calculation; (6) Identification …

The formation constants for the reactions PuO{sub 2}{sup +} + H{sub 2}O = PuO{sub 2}(OH) + H{sup +} and PuO{sub 2}{sup +} + CO{sub 3}{sup 2} = PuO{sub 2}(CO{sub 3}){sup {minus}} were determined in aqueous sodium perchlorate solutions by laser-induced photoacoustic spectroscopy. The molar absorptivity of the PuO{sub 2}{sup +} band at 569 nm decreased with increasing hydroxide concentration. Similarly, spectral changes occurred between 540 and 580 nm as the carbonate concentration was increased. The absorption data were analyzed by the non-linear least-squares program SQUAD to yield complexation constants. Using the specific ion interaction theory, both complexation constants were extrapolated to zero ionic strength. These thermodynamic complexation constants were combined with the oxidation-reduction potentials of Pu to obtain Eh versus pH diagrams. 120 refs., 35 figs., 12 tabs.

We present the search for the lepton flavour violating decay {tau} {yields} lK{sup 0}{sub s} with the BaBar experiment data. This process and many other lepton flavour violating {tau} decays, like {tau} {yields} {mu}{gamma} and {tau} {yields} lll, are one of the most promising channel to search for evidence of new physics. According to the Standard Model and the neutrino mixing parameters, branching fractions are estimated well below 10{sup -14}, but many models of new physics allow for branching fractions values close to the present experimental sensitivity. This analysis is based on a data sample of 469fb{sup -1} collected by BABAR detector at the PEP-II storage ring from 1999 to 2007, equivalent to 431 millions of {tau} pairs. the BABAR experiment, initially designed for studying CP violation in B mesons, has demonstrated to be one of the most suitable environments for studying {tau} decays. The tracking system, the calorimeter and the particle identification of BABAR, together with the knowledge of the {tau} initial energy, allow an extremely powerful rejection of background events that, for this analysis, is better than 10{sup -9}. Being {tau} {yields} lK{sup 0}{sub s} a decay mode without neutrinos, the signal {tau} decay can be fully reconstructed. …

Much of the previous work in the large data visualization area has solely focused on handling the scale of the data. This task is clearly a great challenge and necessary, but it is not sufficient. Applying standard visualization techniques to large scale data sets often creates complicated pictures where meaningful trends are lost. A second challenge, then, is to also provide algorithms that simplify what an analyst must understand, using either visual or quantitative means. This challenge can be summarized as improving the legibility or reducing the complexity of massive data sets. Fully meeting both of these challenges is the work of many, many PhD dissertations. In this dissertation, we describe some new techniques to address both the scale and legibility challenges, in hope of contributing to the larger solution. In addition to our assumption of simultaneously addressing both scale and legibility, we add an additional requirement that the solutions considered fit well within an interoperable framework for diverse algorithms, because a large suite of algorithms is often necessary to fully understand complex data sets. For scale, we present a general architecture for handling large data, as well as details of a contract-based system for integrating advanced optimizations into a …

In order to better understand the fundamental components that govern catalytic activity, two-dimensional model platinum nanocatalyst arrays have been designed and fabricated. These catalysts arrays are meant to model the interplay of the metal and support important to industrial heterogeneous catalytic reactions. Photolithography and sub-lithographic techniques such as electron beam lithography, size reduction lithography and nanoimprint lithography have been employed to create these platinum nanoarrays. Both in-situ and ex-situ surface science techniques and catalytic reaction measurements were used to correlate the structural parameters of the system to catalytic activity.

None

Surfactant-coated cobalt nanocrystals can be prepared with areasonable degree of control over particle size and shape using athermolytic route. The small crystallite size, enhanced reactivity andtunable interparticle interactions enable use of this material asstarting material for demonstration of achievement of novel structuresusing extremely simple solution-based approaches. In particular,formation of hollow cobalt sulfide nanocrystals upon chemicalmodification and emergence of long-range orientational order upondrying-mediated assembly of cobalt nanocrystals is reportedhere.Colloidal preparation of Co nanocrystals has been well-studied.Here, we emphasize general principles and crystallographic/morphologicalcharacterization of disk-shaped hcp-Co nanocrystals. Use of surfactantmolecules enables achievement of multiple morphologies in one syntheticsystem.Formation of hollow structures upon in-solution sulfidation of Conanocrystals is presented and discussed. A Kirkendall-type effect,involving dominant outward mass transport during formation of the ionicshell material explains the results naturally. It is expected that thisphenomenon will generalize extensively to formation of hollow structuresof an enormous variety of compositions. Detailed study of particlemorphology as a function of reaction conditions suggest phenomena likelyto be generally relevant to use of this approach. A short report ofcrystallographic co-alignment into vortex-like structures is alsoprovided. Our current best picture of this process involves an interplayof packing and magnetic interactions between facetedparticles.

Rapid developments in time-resolved optical spectroscopy have led to renewed interest in the nonequilibrium state of superconductors and other highly correlated electron materials. In these experiments, the nonequilibrium state is prepared by the absorption of short (less than 100 fs) laser pulses, typically in the near-infrared, that perturb the density and energy distribution of quasiparticles. The evolution of the nonequilibrium state is probed by time resolving the changes in the optical response functions of the medium that take place after photoexcitation. Ultimately, the goal of such experiments is to understand not only the nonequilibrium state, but to shed light on the still poorly understood equilibrium properties of these materials. We report nonequilibrium experiments that have revealed aspects of the cup rates that have been inaccessible by other techniques. Namely, the diffusion and recombination coefficients of quasiparticles have been measured in both YBa{sub 2}Cu{sub 3}O{sub 6.5} and Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+x} using time-resolved optical spectroscopy. Dependence of these measurements on doping, temperature and laser intensity is also obtained. To study the recombination of quasiparticles, we measure the change in reflectivity {Delta}R which is directly proportional to the nonequilibrium quasiparticle density created by the laser. From the intensity dependence, we estimate …

Ion exchange column elution methods for the separation of americium and curium using tartrate and lactate solutions have been developed which are superior to citrate elutions. Tartrate elutions are suitable for slow separations and lactate elutions are satisfactory for general use where rapid separations are required. Fission and spallation products were isolated from Pu{sup 239} targets which had been bombarded with alpha particles of 21 to 37 Mev energy. Fission yield curves as well as fission and spallation excitation functions are presented and discussed in terms of odd-even and Z{sup 2}/A effects. The high cross sections observed for the (a, 2n) and (a, p2n) reactions were surprising results from this investigation. In the course of the Pu{sup 239} bombardments, studies of the decay schemes of Am{sup 240}, Cm{sup 240}, and Cm{sup 241} were undertaken. Decay energy and half-1ife information on all of the transmercury nuclides has been collected and systematized. Trends on the energy surface for alpha energies, beta energies, nucleon binding energies, and Bohr-Wheeler parameters are presented. These energy systematics have led to a complete tabulation of the masses of the isotopes of the elements above mercury. Predictions of nuclear properties are included for some isotopes of elements 99 …

The development of rapid, selective, and sensitive methods for the determination of osmium in liquid samples is reported. The specific application of primary interest was the estimation of microgram or milligram quantities of osmium in homogeneous reactcr fuel solutions which contain uranyl sulfate as the major component and corrosion products of stainless steel as minor components. (W.L.H.)

A detailed instructional manual was created to guide criticality safety engineers through the process of designing a criticality alarm system (CAS) for Department of Energy (DOE) hazard class 1 and 2 facilities. Regulatory and technical requirements were both addressed. A list of design tasks and technical subtasks are thoroughly analyzed to provide concise direction for how to complete the analysis. An example of the application of the design methodology, the Criticality Alarm System developed for the Radioisotope Production Laboratory (RPL) of Richland, Washington is also included. The analysis for RPL utilizes the Monte Carlo code MCNP5 for establishing detector coverage in the facility. Significant improvements to the existing CAS were made that increase the reliability, transparency, and coverage of the system.

In the past decades, there has been increasing interest in pulsed high power RF sources for building high-gradient high-energy particle accelerators. Passive RF pulse compression systems have been used in many applications to match the available RF sources to the loads requiring higher RF power but a shorter pulse. Theoretically, an active RF pulse compression system has the advantage of higher efficiency and compactness over the passive system. However, the key component for such a system an element capable of switching hundreds of megawatts of RF power in a short time compared to the compressed pulse width is still an open problem. In this dissertation, we present a switch module composed of an active window based on the bulk effects in semiconductor, a circular waveguide three-port network and a movable short plane, with the capability to adjust the S-parameters before and after switching. The RF properties of the switch module were analyzed. We give the scaling laws of the multiple-element switch systems, which allow the expansion of the system to a higher power level. We present a novel overmoded design for the circular waveguide three-port network and the associated circular-to-rectangular mode-converter. We also detail the design and synthesis process of …

Modern calculations are becoming an essential, complementary tool to inelastic x-ray scattering studies, where x-rays are scattered inelastically to resolve meV phonons. Calculations of the inelastic structure factor for any value of Q assist in both planning the experiment and analyzing the results. Moreover, differences between the measured data and theoretical calculations help identify important new physics driving the properties of novel correlated systems. We have used such calculations to better and more e#14;ciently measure the phonon dispersion and elastic constants of several iron pnictide superconductors. This dissertation describes calculations and measurements at room temperature in the tetragonal phase of CaFe{sub 2}As{sub 2} and LaFeAsO. In both cases, spin-polarized calculations imposing the antiferromagnetic order present in the low-temperature orthorhombic phase dramatically improves the agreement between theory and experiment. This is discussed in terms of the strong antiferromagnetic correlations that are known to persist in the tetragonal phase. In addition, we discuss a relatively new approach called self-consistent ab initio lattice dynamics (SCAILD), which goes beyond the harmonic approximation to include phonon-phonon interactions and produce a temperature-dependent phonon dispersion. We used this technique to study the HCP to BCC transition in beryllium.

None

The castor bean plant (Ricinus communis) is a member of the family Euphorbiaceae. In spite of its common name, the castor plant is not a true bean (i.e., leguminous plants belonging to the family, Fabaceae). Ricinus communis is native to tropical Africa, but because the plant was recognized for its production of oil with many desirable properties, it has been introduced and cultivated in warm temperate regions throughout the world (Armstrong 1999 and Brown 2005). Castor bean plants have also been valued by gardeners as an ornamental plant and, historically, as a natural rodenticide. Today, escaped plants grow like weeds throughout much of the southwestern United States, and castor seeds are even widely available to the public for order through the Internet. In this study, multiple loci of chloroplast noncoding sequence data and a few nuclear noncoding regions were examined to identify DNA polymorphisms present among representatives from a geographically diverse panel of Ricinus communis cultivated varieties. The primary objectives for this research were (1) to successfully cultivate castor plants and extract sufficient yields of high quality DNA from an assortment of castor cultivated varieties, (2) to use PCR and sequencing to screen available universal oligos against a small panel …

Ulrich in the forward to the Zenger and Folkman (2002) book, ''The Extraordinary Leader'', wrote about the importance of character in leadership stating, ''Everything about great leaders radiates from character. Character improves the probability of exhibiting strong interpersonal skill. Some of this perceived character is innate . . . but more is driven by the leader's self-awareness and interactions with others'' (p. ix). The purpose of this study was to explore the relationship between leadership effectiveness and character using leader-managers of knowledge workers as the subject sample. Findings indicated that character, particularly those factors associated with honesty, setting the example, and valuing and strengthening others, were what set the most effective leader-managers apart from their peers. Technical competence and self-efficacy were found to be common characteristics of the study sample as was a drive for results. Who a leader-manager is, his/her substance, was found in this study to differentiate the ''best'' leader-managers at the Lawrence Livermore National Laboratory. By their character, leader-managers establish the environment in which knowledge workers contribute and grow. As found by Pfeiffer (2000), Leaders of companies that experience smaller gaps between what they know and what they do (to turn knowledge into action), understand that their …

The effects of certain pulse-shaping networks on the signal-to-noise ratio of a nuclear pulse amplifier were considered. The shaping networks discussed are: equal RC-integrating and RC-differentiating time constant, single- delay-line clipper and RC integrator, and doubledelay-line clipper and RC integrator. The effects of these networks on the signal, when high count rates and overload pulses are present, were also considered. Equations and curves were developed for the energy resolution (signal-tonoise ratio) and resolving time (related to the ability to operate at high counting rates) of the networks. Experimental results are shown for the energy resolution of the types of pulse- shaping networks considered. (auth)

None