Report presenting an investigation of a fin-stabilized scale model of the NACA RM-10 missile at a Mach number of 1.62. Measurements were made of the lift, drag, and pitching moment of the finned body over a range of angles of attack. Comparisons with the results from other testing facilities are also provided.

Report presenting an investigation of an NACA 1-80-100 nose inlet fitted alternately with an elliptical, a parabolic, a 14 degree-inch conical, and a 22 degree-inch conical central body at subsonic and transonic speeds in the 8-foot transonic tunnel. Drag, surface-pressure, and pressure-recovery measurements were obtained at 0 degrees angle of attack through a range of Mach numbers. Results regarding tunnel boundary interference, surface-pressure distribution, external drag, pressure recovery, and propulsive thrust comparison are provided.

The following report follows an investigation made to determine the composition of uranium-rich ternary eutectic alloys most suitable for reactor application in the as-cast condition. These determinations were made based metallographic examination and thermal analysis of as-cast alloys.

Report discussing the rolling of thorium rods. Abstract: "Thorium rods, 1-7/16 inch in diameter, were rolled from Ames castings. The billets were roughed down in diamond-grooved rolls and finished in hand-rounding rolls. Remelted chips as well as primary-metal castings were rolled, and both yielded satisfactory rods. The surface quality of the rods was generally excellent, and the machined slugs were free of seams."

Abstract: Information on five uranium binary alloy systems has been surveyed. These systems are the alloys of uranium with zirconium, chromium, columbium, vanadium, and molybdenum. The equilibrium diagrams are discussed, and where available, data have been included on diffusion studies, cladding experiments, and mechanical properties.

Report discussing the redetermination of liquids for aluminum alloys containing 13 to 25 w/o uranium by metallographic examination, thermal analyses, and electrical resistance measurements. In addition, phase diagrams and a method for producing sound, homogeneous aluminum 16 w/o uranium alloy sleeve castings are presented.

This report studies ammonium dichromate and the conditions it needs to be under in order to precipitate and be isolated from an aqueous system.

From Introduction: "The objective of this report are (1) to describe the complete fuel system, (2) to discuss the procedure used for transitions between JP-4 fuel and hydrogen, and (3) to present and discuss engine performance obtained with both fuels, and (4) to review the reliability of the fuel system."

Report presenting an investigation of a liquid-hydrogen fuel system developed to operate one of the turbojet engines in a twin-engine light bomber at an altitude of 50,000 feet and Mach number 0.75. The heat exchanger was evaluated in an altitude test chamber in conjunction with the complete aircraft fuel system. Results regarding calculated heat-exchanger performance, experimental heat-exchanger performance, and reliability are provided.

Memorandum presenting the system analysis, design, and performance of a control system for an experimental flight-type hydrogen fuel system. The fuel system was designed to investigate some of the problems associated with the utilization of hydrogen as an aircraft fuel. Speed control of the engine was obtained by coupling the hydrogen regulator to the JP-4 fuel control.

Memorandum presenting testing of a twin-engine light bomber modified to utilize hydrogen fuel in one of the two engines during flight at an altitude of 50,000 feet. Three completely successful flights were made using hydrogen fuel. Data are presented to show the effect of tank agitation on fuel pressure and fuel losses.

From abstract: "A continuous countercurrent solid-liquid contactor has been developed which retains the desirable features of the conventional fixed bed and gains the advantages of countercurrent flow. It can be adapted to many solid-liquid mass-transfer processes such as ion exchange, silica gel adsorption, and ore leaching."

Technical report describing a brief survey of the problems concerned with radioactive waste disposal.

Technical report investigating the corrosion resistance of thorium and thorium alloys containing from 2 to 6% chromium, columbinium (niobium), titanium, zirconium and titanium-zirconium in distilled water at 95ºC. The true effects of the various alloy additions could not be determined because of the more marked effect of cold working. [From Abstract]

Technical report presenting a consideration of the characteristics of fused salt-ThF4 solutions suitable for use in homogeneous reactors. Presented in tandem with a brief survey of the literature pertaining to such solutions and a summary of the experimental work accomplished. [From Abstract]

From abstract: "This report presents the laboratory development of the MTR-RaLa Process for the production of barium140 from Materials Testing Reactor assemblies." The laboratory studied four possible chemical schemes with the final process being chosen "on the basis of chemical yield and purity of product, ease of recovery of uranium235, simplicty of equipment, and overall time required for processing" (from introduction).

Report discussing a study aiming to find which electronic state of the C2 molecule is the groud state.

Report discussing the personal aspects involved in the research on transcurium elements at the Lawrence Radiation Laboratory, as well as a brief summary of previously unpublished work with heavy ions.

Abstract: "The radial motion of an ion in an axially symmetric magnetic field is discussed. It is pointed out that particles of constant velocity have clearly defined upper limits to their radial motion. This is a result of the other constant of the motion, the canonical angular momentum. These limits are independent of the number of times an ion is reflected from the mirrors, providing the field is truly axially symmetric."

This report follows a manuscript report made in January 11, 1952, and provides results of a survey that gives corrections as well as suggestions for new and local sources of aggregate material in comparison to the original report. These reports were made in response to a heavy desire of improvement in reactor design and shielding.

Abstract: "The structure of an extremely strong magnetohydrodynamic shock is discussed in the limit of no particle collisions. It is tentatively concluded that the shock transition takes place through the mechanism of a strong electric field produced by charge separation. The pressure in the shocked plasma is due primarily to a very high electron temperature. The ions, on the other hand, undergo an irreversible temperature change of only 3."

Abstract: Yazzie Mesa was examined in May 1951, by the writer, assisted by R. C. Cutter. The mesa shows one main channel deposit and three minor channels. The main channel appears to be a northern extension of a channel deposit being worked by the Vanadium Corporation of America at their Monument No. 2 mine. Two samples taken on the south outcrop of the main channel assayed 0.16% U308 over 4.5 feet and 0.80% U308 over 1 foot. The area is recommended for 10,000 feet of exploration drilling. It is not intended to recommend this footage as a separate contract unit as this report covers only a small part of an area in which drilling will be recommended in forthcoming reports.

Abstract: The design and construction of a slide rule for calculating the solid angle subtended by a rectangle at a point located on a line perpendicular to the center of the rectangle are described.

Report documenting the suitability of Georgia for plant locations to produce synthetic liquid fuels, based on raw materials such as coal, natural gas, oil shales, and oil-impregnated strippable deposits.