This report is an examination of the equipment preferences and decision-making methodology of the coal industry. The prime purpose is to indicate directions in which equipment research might proceed and also to indicate methods by which investment in new, more productive mining equipment could be encouraged. In addition to this, an investigation of the research and development decisions of major mining equipment manufacturers was conducted. The findings can best be condensed into three categories: needs for equipment in underground mining, needs for equipment in surface mining, and the purchase decision by coal mine operators.

The following information about the Savannah River is tabulated: significant activities and discharges along the Savannah River, river water temperature data near Jackson st Savannah River Plant, flow informatiom, and reservoir parameters for Clarks Hill, Richard B. Russell and Hartwell reservoirs.

The relationship between the threshold values of ion-temperature-gradient instabilities and the temperature parameters of plasmas is investigated analytically in slab and toroidal geometries separately. It is found that the threshold values increase rapidly when the ion temperature becomes much higher than the electron temperature. The change of the threshold vaues with respect to the ion temperature is quite similar for both geometric models. This finding is consistent with PLT observations. Furthermore, the analytical results also agree with those of the numerical calculations.

During the current reporting period a total of 139 samples (46 DOE Sample Bank samples and 93 other Penn State samples) of various sizes were distributed. Sixty-three of the samples were distributed to DOE or its contractors; 76 were distributed to other agencies. A total of 88 data printouts were distributed. In addition, seven special data requests were fulfilled by either search/sort and printout or creation of a data disk. Several preliminary requests for Sample Bank and Data Base information have also been handled.

This bibliography cites 500 documents that may be helpful in planning, analysis, research, and development of the various aspects of injection technology in geothermal applications. These documents include results from government research; development, demonstration, and commercialization programs; selected references from the literature; symposia; references from various technical societies and installations; reference books; reviews; and other selected material. The cited references are from (1) subject searching, using indexing, storage, and retrieval information data base of the Department of Energy's Technical Information Center's on-line retrieval system, RECON; (2) searches of references from the RECON data base, of work by authors known to be active in the field of geothermal energy research and development; (3) subject and author searches by the computerized data storage and retrieval system of Chemical Abstracts, American Chemical Society, Washington, DC; and (4) selected references from texts and reviews on this subject. Each citation includes title, author, author affiliation, date of publication, and source. The citations are listed in chronological order (most recent first) in each of the subject categories for which this search was made. The RECON accession number is also given.

A fluidized bed incineration facility has been installed at the Rocky Flats Plant to develop and demonstrate a process for the combustion of transuranic waste. The unit's capacity is about 82 kg/hr of combustible solid waste, which is nine times higher than the rate for the operating pilot-scale unit. The facility utilizes nonaqueous, in situ neutralization of acid gases. These gases are generated during the combustion of halogen-containing materials. The low-temperature (550 /sup 0/C) operation eliminates refractory-lined equipment.

In the tandem mirror experiment (TMX), coherent oscillations have been identified as resulting from the Alfven ion-cyclotron instability. Although the drive for this instability is localized in the end cell, the waves generated propagate out of the unstable region and interact with the central-cell ions. This interaction leads to an experimentally observed scaling of the stored end-cell energy with axial ion end-loss current.

The demonstration of ICF scientific feasibility requires success in target design, driver development and target fabrication. Since these are interrelated, we present here some results of ion beam target studies and relate them to parameters of interest to ion accelerators. Ion deposition physics have long been a well known subject apart from high beam currents. Recent NRL experiments at up to 250 kA/cm/sup 2/ ions confirm the classical deposition physics now at current densities which are comparable to most ion targets. On the other hand, GSI data at low current density but 1 to 10 MeV/nucleon are continually being accumulated. They have yet to find anomalous results. Relying on target concepts outlined briefly, we report on the energy gain of ion-driven fusion targets as a function of input energy, ion ranges and focal spot radius. We also comment on some consequences of target gain versus driver and reactor requirements.

The LIMB (limestone injection multi-stage burner) process offers special potential for reducing NO/sub x/ and SO/sub x/ by at least 50 percent in coal combustion. This is to be accomplished by adding limestone with fuel and/or air in a low NO/sub x/ burner. This program has been directed to defining the chemistry and kinetics necessary to optimize sulfur capture in LIMB combustion. More specifically, this program has attempted to clarify the role of calcium sulfide in LIMB chemistry. When limestone is added in a staged burner, there is a strong possibility that under certain circumstances CaS is produced in the reducing (fuel-rich) zone of the burner. Since CaS is more stable than CaSO/sub 4/, this affords the opportunity to (1) operate the burner at a higher temperature, 2200 to 2500 F, (2) pass the CaS rapidly through the high temperature zone (before dissociation), and (3) complete the combustion in a lean (air-rich) region where the sulfur is finally retained in CaSO/sub 4/. For these reasons this program has concentrated on the high temperature chemistry and kinetics of CaS. To achieve the program objective, the program was divided into three tasks. These involved (1) a study of CaS formation, (2) a …

The Project Integration Office (PIO) was established to assist the US DOE with the direction and coordination of its multiple electric vehicle and hybrid electric vehicle research programs in order to get the maximum payoff from these research efforts. In addition, the PIO performs objective independent technical and economic studies, analyses and modeling, and maintains a technical information liaison service to facilitate information exchange between the program participants and industry. Progress in each of these activities is reported. (LCL)

A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible.

We report on measurements made on a Nova beamline whose output amplifier stages contain new high damage threshold, platinum particle-free laser glass. We project future operating limits for the Nova ten beam amplifier system. 4 refs.

Presently available information on austenitic Fe-Cr-Ni stainless steel plate, welds, and castings for service below 77 K are reviewed with the intent (1) of developing systematic relationships between mechanical properties, composition, microstructure, and processing, and (2) of assessing the adequacy of these data bases in the design, fabrication, and operation of engineering systems at 4 K.

AMAX Research Development Center (AMAX R D) has been investigating methods for enhancing the reactivity and durability of the zinc ferrite desulfurization sorbent. Zinc ferrite sorbents are intended for use in desulfurization of hot coal gas in integrated gasification combined cycle (IGCC) or molten carbonate fuel cell (MCFC) applications. For the present program, the reactivity of the sorbent may be defined as its sulfur sorption capacity at the breakthrough point and at saturation in a bench-scale, fixed-bed reactor. Durability may be defined as the ability of the sorbent to maintain important physical characteristics such As size, strength, and specific surface area during 10 cycles of sulfidation and oxidation.

The design and implementation of the downhole portion of a measuring system for gamma rays is presented. Included are three alternative designs for radiation-resistant collimating and condensing lenses, sample cells, turning mirrors, and fiber-optic termination techniques. Also discussed are mechanical mounts and positioners, shielding, alignment, test methods, and field installation. Some general design suggestions for optical systems in adverse environments are also presented.

A preliminary winding pack design was performed with the goal of showing feasibility of producing 10-T maximum field with a pack current density of 40 A.mm/sup -2/ while accepting 2.7 kW per coil nuclear heating. A cable-in-conduit conductor design (CIC), reported at the 6th Topical Meeting on the Technology of Fusion Energy, was based on several key issues.

A model has been created of the explosive vaporization of small droplets by the absorption of energy from a high energy laser beam. The model consists of a polarizable drop of fluid interacting with laser radiation. A criterion for the explosion of the droplet has been introduced. Selfsimilarity is invoked to reduce the spherically symmetric problem involving hydrodynamics and Maxwell's equations to simple quadrature. Experimental evidence in favor of the model is cited.

Two automated reaction calorimetry systems were built and tested. The first made use of a quartz thermometer probe as the temperature measuring element. The second was constructed using a thermister which was part of a Wheatstone bridge. The off-balance voltage from the bridge was measured using the 6 1/2 digit digital voltmeter, and transferred to the microprocessor. The one disadvantage of the first system is the relatively large size of the quartz sensor. The calorimeter systems were used to measure: the enthalpies of hydrolysis of ketals, acetal, orthoesters, enthalpies of hydration of alkenes; enthalpies of formation of small ring hydrocarbons. (ATT)

Astrophysical r-process calculations of transbismuth elements are of interest because certain actinide pairs can be treated as chronometers in determining the duration of nucleosynthesis. For one such calculation where a particularly long galactic age was derived, 21 + 2 - 4 Gyr, we present evidence that the effect of beta-delayed fission appears to be seriously overestimated in uranium decay chains with A = 252 to 257. With this conclusion, it follows that this estimate of the galactic age must be considered more uncertain than if the calculated rates of beta-delayed fission were found to be acceptable. The nuclear level structure of 238Np has been investigated using the 237Np(n,..gamma..)238Np reaction and the alpha decay of 242mAm as experimental probes. Having established a level scheme for 238Np that includes 47 excited levels and 93 secondary transitions, we find a high degree of correspondence between the experimental band structure and that of a semi-empirical model developed to predict excitations in odd-odd deformed nuclei. 35 refs., 4 figs., 3 tabs.

A free electron laser and free electron laser amplifier using beam transport devices for guiding an electron beam to a wiggler of a free electron laser and returning the electron beam to decelerating cavities disposed adjacent to the accelerating cavities of the free electron laser. Rf energy is extracted from the electron beam after it emerges from the wiggler by means of the decelerating cavities which are closely coupled to the accelerating cavities, or by means of a second bore within a single set of cavities. Rf energy extracted from the decelerated electron beam is used to supplement energy provided by an external source, such as a klystron, to thereby enhance overall efficiency of the system.

New low-energy x-ray diagnostic techniques are used to explore energy-transport processes in laser heated plasmas. Streak cameras are used to provide 15-psec time-resolution measurements of subkeV x-ray emission. A very thin (50 ..mu..g/cm/sup 2/) carbon substrate provides a low-energy x-ray transparent window to the transmission photocathode of this soft x-ray streak camera. Active differential vacuum pumping of the instrument is required. The use of high-sensitivity, low secondary-electron energy-spread CsI photocathodes in x-ray streak cameras is also described. Significant increases in sensitivity with only a small and intermittant decrease in dynamic range were observed. These coherent, complementary advances in subkeV, time-resolved x-ray diagnostic capability are applied to energy-transport investigations of 1.06-..mu..m laser plasmas. Both solid disk targets of a variety of Z's as well as Be-on-Al layered-disk targets were irradiated with 700-psec laser pulses of selected intensity between 3 x 10/sup 14/ W/cm/sup 2/ and 1 x 10/sup 15/ W/cm/sup 2/.

Twenty-seven papers are presented on beryllium supply, production, fabrication, safe handling, analysis, powder technology, and coatings. Separate abstracts have been prepared for the individual papers. (DLC)

This report outlines a methodology to study the effects of disruptive events on nuclear waste material in stable geologic sites. The methodology is based upon developing a discrete events model that can be simulated on the computer. This methodology allows a natural development of simulation models that use computer resources in an efficient manner. Accurate modeling in this area depends in large part upon accurate modeling of ion transport behavior in the storage media. Unfortunately, developments in this area are not at a stage where there is any consensus on proper models for such transport. Consequently, our work is directed primarily towards showing how disruptive events can be properly incorporated in such a model, rather than as a predictive tool at this stage. When and if proper geologic parameters can be determined, then it would be possible to use this as a predictive model. Assumptions and their bases are discussed, and the mathematical and computer model are described.

This booklet discusses some ideas and methods for using Colorado geothermal energy. A project installed in Pagosa Springs, which consists of a pipeline laid down 8th street with service to residences retrofitted to geothermal space heating, is described. (ACR)