The hybrid reactor studies are reviewed. The optimization of the point design and work on a reference design are described. The status of the nuclear analysis of fast spectrum blankets, systems studies for fissile fuel producing hybrid reactor, and the mechanical design of the machine are reviewed. (MHR)

None

In the present ISABELLE design, the luminosity at each insertion will be the same, unless special efforts are taken to get a low-..beta.. insertion or reduced crossing angle. These can only change the luminosity by factors of 2 to 4 from insertion to insertion. An estimation of the range of desired luminosities is given.

None

Winding of a Nb--Ti test coil at the Lawrence Livermore Laboratory is nearly complete. The conductor in this coil operates in a maximum field of 7.5 T and provides the 2-T field required by the Mirror Fusion Test Facility. Nb/sub 3/Sn multifilamentary conductors, made using the ''bronze'' technique, appear capable of providing the higher fields needed by commercial reactors.

The Savannah River Laboratory (SRL) is coordinating an interlaboratory effort to provide, test, and use state-of-the-art methods for calculating the environmental impact to an offsite population from the normal releases of radionuclides during the routine operation of a fuel-reprocessing plant. Results of this effort are the estimated doses to regional, continental, and global populations. Estimates are based upon operation of a hypothetical reprocessing plant at a site in the southeastern United States. The hypothetical plant will reprocess fuel used at a burn rate of 30 megawatts/metric ton and a burnup of 33,000 megawatt days/metric ton. All fuel will have been cooled for at least 365 days. The plant will have a 10 metric ton/day capacity and an assumed 3000 metric ton/year (82 percent online plant operation) output. Lifetime of the plant is assumed to be 40 years.

None

Beryllium is a metal sensitive to machining damage, causing a loss in mechanical properties. Since some mechanical abrading is often used in surface preparation for mounting strain gages, it is desirable to know whether the abrading produces flaws. Metallographic study of beryllium subjected to four different surface preparation methods was carried out. It was determined that the gentle abrading necessary for affixing strain gages produced a negligible density and depth of flaws and did not lower the mechanical properties. 5 figures, 2 tables.

Most of the components of the Neutral Beam Lines of the Tokamak Fusion Test Reactor (TFTR) will be enclosed in a 50 cubic meter box-shaped vacuum chamber. The chamber will have a number of unorthodox features to accomodate both neutral beam and TFTR requirements. The design constraints, and the resulting chamber design, are presented.

During the fifteen months that the Argus laser facility has been operating we have had two primary goals. These are: (1) to provide focusable, well characterized, high power beams for laser fusion experiments and (2) to further understand the propagation of high power and energy pulses. The propagation experiments have already led to increases in the laser output power and system reliability. Pulses appropriate for advanced targets are shaped to optimize the compression and heating of the target. In general they stress the laser in both limits of energy and power. In this work several results significant to the laser fusion program were realized. The neutron output of fusion targets increased by almost two orders of magnitude to more than 10/sup 9/ neutron/shot. An improved beam propagation technique (image relaying) was developed and partially implemented. It increased the focusable output power for short pulses (30-100 ps) to more than 4.0 TW. More than one kilojoule/beam was extracted from the laser in a high quality beam in a one nanosecond Gaussian pulse. A complex two step optical pulse was generated and successfully amplified to peak powers of more than 3.0 TW. The most recent of the system upgrades are complete image …

A variety of x-ray imaging techniques have been used to study the absorption, transport and implosion characteristics of exploding pusher microsphere targets irradiated with 1.06 ..mu..m light. Multichannel grazing incidence reflection microscopy, zone plate coded imaging and spatially resolved x-ray spectroscopy have observed the thermal and suprathermal x-ray emission associated with these phenomena. A second generation of x-ray imaging devices, designed for forthcoming high density implosion experiments, including axisymmetric x-ray microscopes and 1- and 2-D crystal line imaging devices, will also be briefly discussed.

Thirty-nine one meter square proportional chambers with delay line readout were constructed for the external muon identifier of the Fermilab 15 foot bubble chamber. They provide X,Y,U(45/sup 0/) and T (avalanche time) information using a single wire plane, etched strip cathodes and nine amplifiers. They have a time resolution of +-27ns, single particle spatial resolution of +-2 to +-3mm and double particle resolution of approximately 2/sup 1///sub 2/ to 4cm. The energy accessible to each wire is limited so none of the wires in the first 25 chambers has broken since their installation in 1973 to 1974.

This investigation of terrestrial PV systems considered the technical and economic feasibility for systems in three size categories: a small system of about 12 kW peak output for on-site residential use; a large 1500 MW central power plant contributing to the bulk energy of a utility system power grid; and an intermediate size system of about 250 kW for use on public or commercial buildings. In each category, conceptual designs were developed, performance was analyzed for a range of climatic regions, economic analyses were performed, and assessments were made of pertinent institutional issues. The report consists of three volumes. This volume contains a Study Summary of the major study results. Volume II contains the detailed results pertaining to on-site residential photovoltaic systems, central power plant photovoltaic systems, and intermediate size systems applied to commercial and public buildings. Volume III contains supporting appendix material. (WHK)

The use of electron impact broadened resonance lines to diagnose near-term high density diagnostics is discussed. In particular, the question of how to choose seed and pusher materials to have discernible broadening effects while maintaining line visibility is discussed.

This investigation of terrestrial PV systems considered the technical and economic feasibility for systems in three size categories: a small system of about 12 kW peak output for on-site residential use; a large 1500 MW central power plant contributing to the bulk energy of a utility system power grid; and an intermediate size system of about 250 kW for use on public or commercial buildings. In each category, conceptual designs were developed, performance was analyzed for a range of climatic regions, economic analyses were performed, and assessments were made of pertinent institutional issues. The report consists of three volumes. Volume I contains a Study Summary of the major study results. This volume contains the detailed results pertaining to on-site residential photovoltaic systems, central power plant photovoltaic systems, and intermediate size systems applied to commercial and public buildings. Volume III contains supporting appendix material. (WHK)

This report gives detailed information in the form of the following chapters: (1) overview, (2) plasma physics, (3) magnets, (4) end-plug neutral beams, (5) barrier pump neutral beams, (6) ecr heating, (7) plasma direct converter, and (8) central cell. (MOW)

Lists of documents exchanged during the first half of 1977 under agreements between the U.S. Nuclear Regulatory Commission's Office of Nuclear Regulatory Research and the governments of France, Federal Republic of Germany, and Japan are presented. During this period, the NRC received 41 reports from France, 29 from F. R. Germany, and 24 from Japan, and in return sent 107 U.S. reports to each of these three countries.

The Tokamak Fusion Test Reactor will be installed at the Princeton Plasma Physics Laboratory facility. This is a major step to reach the goal of fusion power using toroidal magnetic fields for plasma confinement. A major part of this test reactor will be four neutral beam injection systems. These systems will inject 20 MW of 120 kV neutral deuterium atoms into the plasma for 0.5 seconds. In order to achieve the required power input to the plasma, several systems are required within the neutral beam line. These are the source, neutralizer, ion deflection magnet, calorimeter and retraction system, ion dump, cryopumps and vacuum enclosure. All of these systems have constraints imposed which increase the complexity of their designs. Since all systems must operate in a tritium environment, remote handling capabilities must be incorporated into the design. An overview is presented of the Lawrence Livermore Laboratory/Lawrence Berkeley Laboratory Neutral Beam Injection System design. Specifications for the machine and a general description of the total system are presented.

The Tandem Mirror Experiment (TMX) is designed to test the physics of a new approach to Q-enhancement in open confinement systems. In the tandem mirror concept, the ends of a long solenoid are plugged electrostatically by means of ambipolar potential barriers created in two mirror machines or plugs, one at each end of the solenoid. The ambipolar potential in mirror machines develops as a consequence of the higher scattering rate of electrons and the balancing of electron and ion loss rates. The TMX experiment incorporates very few new engineering developments, but it does involve a new way of combining in an integrated system many previously developed ideas. The engineering task is to design the machine that would provide a proof-of-principle evaluation of the tandem mirror concept as rapidly as possible. The preliminary design was started in September 1976 and was completed by December 1976. It led to a cost estimate of $11 million and a scheduled construction period of 18 months.

This report defines the analytical framework for, and presents the results of, a study to determine the macroeconomic effects of increased market penetration of solar energy technologies over the 1977-2000 time period. For the purposes of this document, solar technologies are defined as wind, photovoltaics, ocean thermal electric (OTEC), small-scale (non-utility) hydroelectric and all solar active and passive thermal technologies. This research has been undertaken in support of the National Plan to Accelerate Commercialization (NPAC) of Solar Energy. The capital and operating requirements for three market penetration levels are first determined; the effects of these requirements on economic performance are then estimated using the Hudson-Jorgenson Energy/Economic Model. The analytical design, computational methods, data sources, assumptions and scenario configurations for this analysis are defined in detail. The results of the analysis of the economic impact of solar energy are presented in detail, and the implications of these results are discussed. Appendix A explains the methodology for transforming investment to capital stocks. Appendix B, which is provided in a separate volume, describes the Hudson-Jorgenson Model in greater detail. (WHK)

During the Erie internal alternate fuel review in 1976, the ERDA RFP for small scale demonstration plants was released and Erie responded. The basis of the contract proposal included design, construction and operation of a Demonstration Plant, which could be expanded to a full-sized industrial plant. The government specifically required the ability to handle Eastern, high-caking, high-sulfur coal. Erie's proposal was to utilize low-caking, low-sulfur coals with the Eastern coals optional. Phase I activity included selection of a gasifier and bids were solicited in October 1977. Babcock Contractors, Inc. was selected in February 1978, based on price and technical evaluation of the gasifiers. Some delay was experienced in selection activity due to late bids and clarification of bid proposals. Prior to selection activities, Erie, McKee and DOE participated in a gasifier inspection trip, visiting 11 plants in South Africa, Italy and Czechoslovakia. The operations, maintenance and designs included by the solicited vendors were evaluated and compared with site observations. Knowledge gained from the trip was used to evaluate the gasifiers and initiated various trade-off studies to resolve questionable areas. As design work progressed, delays were incurred with subcontractors due to late funding, delayed contractual approvals and disputes arising from DOE …

The Hudson-Jorgenson Energy/Economic Model - formally known as the Long Term Interindustry Transactions Model (LITM) - is an econometric model of the structure of the US economy. LITM integrates two separate models into one integrated system. These models are the Macroeconomic Model, a growth model incorporating the underlying trends of economic development, and the Interindustry Model, an endogenous coefficient input-output model of the structure of the economy incorporating patterns of expenditure, prices, and production on a sectoral basis. LITM emphasizes the energy system and its role within the economy. Applications of LITM have, therefore, focused on energy, the effect of energy changes on the economy, and the effect of econometric changes on the energy system. In addition, LITM can be used as framework for long term economic projection and structural analysis.

A mechanical model for the emplacement pipe system is developed. The model is then employed to determine the force applied to the surface collar of the emplacement pipe, the pipe-stemming load, and the stress along the emplacement pipe as a function of stemming height. These results are presented as integrals and a method for their numerical integration is given.

A survey of the literature on carbonate scaling is presented as it affects geothermal fluid systems. The geothermal brine, as the fluid is called, contains a number of chemical constituents which have leached into it from the reservoir rock. As the hot fluid is withdrawn through wells, a flow of steam, water, or a mixture of steam and water, results. If the well flows at a high enough rate, some brine will flash to steam because of the pressure drop, resulting in the steam/water flow mixture. The chemical composition of the brines is tabulated as the composition of the components in the water system before flashing and the composition of the non-condensible gases after flashing. Total dissolved solids vary from that of ordinary well water to concentrated solutions as high as 40% by weight. Calcium is a major cationic constituent, and biocarbonate an important anionic constituent of the brine. Prevention/treatment techniques, specific site experimental results, and computer models are presented.