None

The authors analyze the consequences of models of structure formation for higher-order (n-point) galaxy correlation functions in the mildly non-linear regime. Several variations of the standard [Omega] = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R[sub p] [approximately]20 h[sup [minus]1] Mpc, e.g., low-matter-density (non-zero cosmological constant) models, [open quote]tilted[close quote] primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower, et al. The authors show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale-dependence leads to a dramatic decrease of the hierarchical amplitudes Q[sub J] at large scales, r [approx gt] R[sub p]. Current observational constraints on the three-point amplitudes Q[sub 3] and S[sub 3] can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed …

In NiAl, we have succeeded in determining the complete Ginzburg-Landau strain free energy function necessary to model the cubic to tetragonal martensite transformation in a sample of any size. We believe that this is the first time that the parameters of a Ginzburg-Landau functional and the complete strain spinodal for any three-dimensional displacive transformation were used in simulating the transformation near a crack tip under Mode I loading; the transformation pattern and toughening are different from standard transformation toughening theories. Furthermore, the strain spinodal has an approximately conical shape which can be specified by two material dependent experimentally accessible parameters, rather than the ellipsoidal shape in standard theories. Stress induced martensitic transformation in a polycrystalline sample of NiAl was simulated. In the ZrO[sub 2] system, first principles calculations to determine the semi-empirical potentials for simulating the cubic-tetragonal and tetragonal-monoclinic transformations have been started by doing a more elaborate total energy calculation.In the Al[sub 2]0[sub 3] system, we have discovered that the first principles calculations and semi-empirical potentials have just been completed byanother group in England which we will use instead to base our molecular dynamics simulations on.

The research covers high-resolution imaging of electrical conductivity using low-frequency electromagnetic fields. This report contains two appendices: progress made in optimizing a 3D integral equations forward modeling code for imaging, and a technique for improving the resolution of the inverse problem.

The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

Radiative corrections to the parameters of the standard electroweak model are considered in case that there is no light Higgs particle.

A laser flash photolysis kinetic study of a W(CO){sub 5} intermediate reacting with several different substituted 2,2{prime}-bipyridine ligands at pressures up to 150 MPa in liquid toluene has confirmed the considerable influence of steric hindrance on the mechanism of a thermal ring closure reaction. A similar laser flash photolysis kinetic study has been carried out with Mo(CO){sub 6} and several bidentate ligands resembling 2,2{prime}-bipyridine dissolved in supercritical carbon dioxide. A much larger negative activation volume is found in supercritical carbon dioxide than observed previously with this solute system dissolved in liquid toluene. Rate of replacement of one polydentate ligand by another stronger chelating agent in the first coordination sphere of aqueous gadolinium(III) ion was measured over a range of pressures and other variables using a stopped-flow spectrophotometer. Two consecutive first order reaction steps are observed that show acid-catalysis.

Using first-principles electronic structure calculations based on the Linear-Muffin-Tin Orbital (LMTO) method, we have investigated the effects of interstitial born and hydrogen on the electronic structure of the Ll{sub 2} ordered intermetallic Ni{sub 3}Al. When it occupies an octahedral interstitial site entirely coordinated by six Ni atoms, we find that boron enhances the charge distribution found in the strongly-bound ``pure`` Ni{sub 3}Al crystal: Charge is depleted at Ni and Al region. Substitution Al atoms for two of the Ni atoms coordinating the boron, however, reduces the interstitial charge density between atomic planes. In contrast to boron, hydrogen appears to deplete the interstitial charge, even when fully coordinated by Ni atoms. We suggest that these results are broadly consistent with the notion of boron as a cohesion enhancer and hydrogen as an embrittler.

The research covers high-resolution imaging of electrical conductivity using low-frequency electromagnetic fields. This report contains two appendices: progress made in optimizing a 3D integral equations forward modeling code for imaging, and a technique for improving the resolution of the inverse problem.

In NiAl, we have succeeded in determining the complete Ginzburg-Landau strain free energy function necessary to model the cubic to tetragonal martensite transformation in a sample of any size. We believe that this is the first time that the parameters of a Ginzburg-Landau functional and the complete strain spinodal for any three-dimensional displacive transformation were used in simulating the transformation near a crack tip under Mode I loading; the transformation pattern and toughening are different from standard transformation toughening theories. Furthermore, the strain spinodal has an approximately conical shape which can be specified by two material dependent experimentally accessible parameters, rather than the ellipsoidal shape in standard theories. Stress induced martensitic transformation in a polycrystalline sample of NiAl was simulated. In the ZrO{sub 2} system, first principles calculations to determine the semi-empirical potentials for simulating the cubic-tetragonal and tetragonal-monoclinic transformations have been started by doing a more elaborate total energy calculation.In the Al{sub 2}0{sub 3} system, we have discovered that the first principles calculations and semi-empirical potentials have just been completed byanother group in England which we will use instead to base our molecular dynamics simulations on.

This paper describes ductile-phase roughening in V-V{sub 3}Si in-situ composites produced by conventional arc melting (AM), cold-crucible induction melting (IM), and cold-crucible directional solidification (DS). Notched three-point bending tests were performed to determine the effects of synthesis method on the room temperature fracture toughness of eutectic compositions, which contain nearly equal volume fractions of V{sub 3}Si and the V(Si) solid solution phase. Fracture toughness values ranged from 10 MPa{radical}m for the AM eutectic to over 20 MPa{radical}4m for the IM and DS eutectic alloys. SEM fractography, surface profiling, and chemical analyses were performed to correlate the toughness values with the microstructures and interstitial concentrations produced by the three synthesis methods.

The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

Data reported by domestic nuclear utility companies in their responses to the 1991 and 1992 ``Uranium Industry Annual Survey,`` Form EIA-858, Schedule B ``Uranium Marketing Activities,are provided in response to the requirements in the Energy Policy Act 1992. Data on utility uranium purchases and imports are shown on Table 1. Utility enrichment feed deliveries and secondary market acquisitions of uranium equivalent of US DOE separative work units are shown on Table 2. Appendix A contains a listing of firms that sold uranium to US utilities during 1992 under new domestic purchase contracts. Appendix B contains a similar listing of firms that sold uranium to US utilities during 1992 under new import purchase contracts. Appendix C contains an explanation of Form EIA-858 survey methodologies with emphasis on the processing of Schedule B data.

Radiative corrections to the parameters of the standard electroweak model are considered in case that there is no light Higgs particle.

The United States Department of Energy, Morgantown Energy Research Center (DOE/METC), is sponsoring the development of direct coal-fired turbine power plants as part of their Heat Engines program. A major technical challenge remaining for the development of the direct coal-fired turbine is high-temperature combustion gas cleaning to meet environmental standards for sulfur oxides and particulate emissions, as well as to provide acceptable turbine life. The Westinghouse Electric Corporation, Science & Technology Center, is evaluating two Integrated Low Emissions Cleanup (ILEC) concepts that have been configured to meet this technical challenge: A baseline ceramic barrier filter ILEC concept, and a fluidized bed ILEC concept. These ILEC concepts simultaneously control sulfur, particulate, and alkali contaminants in the high-pressure combustion gases at turbine inlet temperatures up to 2300{degrees}F. This document reports the status of a program in the nineteenth quarter to develop this ILEC technology for direct coal-fired turbine power plants.

We present results from experiments directed toward increasing the degree of transverse coherence in x-ray laser beams. We have concentrated on the neon-like yttrium (Z=39) collisionally-pumped x-ray laser as the test system for these studies because of its unique combination of brightness, monochromaticity, and high-reflectivity optics availability. Attempts at improving laser performance using proximate feedback optics failed. Modest success has been found to date in ``double foil`` experiments, involving two x-ray lasers spatially separated by 29 cm and shot sequentially in an ``oscillator-amplifier`` configuration.

In Part I, Surface Chemistry of Coal Pyrite the mechanisms responsible for the inefficient rejection of coal pyrite were investigated using a number of experimental techniques. The test results demonstrate that the hydrophobicity of coal pyrite is related to the surface products formed during oxidation in aqueous solutions. During oxidation, a sulfur-rich surface layer is produced in near neutral pH solutions. This surface layer is composed mainly of sulfur species in the form of an iron-polysulfide along with a smaller amount of iron oxide/hydroxides. The floatability coal pyrite increases dramatically in the presence of frothers and hydrocarbon collectors. These reagents are believed to absorb on the weakly hydrophobic pyrite surfaces as a result of hydrophobic interaction forces. In Part III, Developing the Best Possible Rejection Schemes, a number of pyrite depressants were evaluated in column and conventional flotation tests. These included manganese (Mn) metal, chelating agents quinone and diethylenetriamine (DETA), and several commercially-available organic depressants. Of these, the additives which serve as reducing agents were found to be most effective. Reducing agents were used to prevent pyrite oxidation and/or remove oxidation products present on previously oxidized surfaces. These data show that Mn is a significantly stronger depressant for pyrite than …

Since 1974 the neutrino processes mediated by neutral currents have been a part of supernova (SN) modeling calculations. In this report only present day SN calculations will be discussed. First I will give brief description of the SN computer model and an outline of the explosion process as depicted by that model. Then I will discuss the role weak neutral current (WNC) processes play in this explosion process. Finally, I will discus inelastic scattering of tau neutrinos by heavy elements in WNC or Earth as a mechanism for measuring the mass of tau neutrino.

The authors analyze the consequences of models of structure formation for higher-order (n-point) galaxy correlation functions in the mildly non-linear regime. Several variations of the standard {Omega} = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R{sub p} {approximately}20 h{sup {minus}1} Mpc, e.g., low-matter-density (non-zero cosmological constant) models, {open_quote}tilted{close_quote} primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower, et al. The authors show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale-dependence leads to a dramatic decrease of the hierarchical amplitudes Q{sub J} at large scales, r {approx_gt} R{sub p}. Current observational constraints on the three-point amplitudes Q{sub 3} and S{sub 3} can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed on large scales.

For {mu}LCR with slow polarization transfer, the weak resonance signals can be strengthened by delaying the positron observation period, for pulsed and chopped muon beams. Furthermore, the sensitivity to drifts can be reduced or eliminated by using the ratios of late to early e{sup +} counts. These possibilities for using time information are discussed quantitatively.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations. Heteropolyanions (HPAs) offer the opportunity to develop soluble forms of surface confined catalysts. HPAs, are inexpensive, well-characterized, water soluble metal oxide clusters, e.g. [EM {sub 12}O{sub 40}]{sup 14{minus}} where E = Si or P and M = Mo or W. They are easily modified to contain other transition metals such as Co, Ni or Ru and, can be made soluble in organic solvents. The protic forms exhibit extremely high acidities pK{sub a} {approx} 0--2. In addition, selectively modified RPAs can function as low temperature hydrogenation catalysts that exhibit microporosity HPAs are multifunctional catalysts that could be used to promote both hydroliquefaction and hydrotreating. In theory, these functions could be employed sequentially or simultaneously and could permit exceptional control of liquefaction reactions and reaction conditions. Thus, the current research program involves efforts to evaluate HPAs as soluble liquefaction and hydrotreating catalysts, with the goal of developing soluble analogs of surface confined catalysts. Alternately, if …

The authors have measured the ion yields for helium and neon ionized by 120 femtosecond, 614 nanometer laser pulses with intensities up to 10{sup 16} watts per square centimeter. They have found that the He II and Ne II data exhibit features incompatible with standard nonresonant sequential ionization. These features reduce the usefulness of optical field ionization for monitoring laser intensity. For the experiment, they expect dynamic resonances to have little effect on the ionization, and they attribute the features to nonsequential ionization based on the simultaneous saturation of the features and the singly ionized charge states.

The technique of laser-induced ablation of thin films from glass slide substrates has been investigated as a candidate vapor target production method for studies of both tunneling-driven x-ray/xuv recombination lasers and relativistic propagation using intense, ultra-short laser pulses. It is shown by simultaneous two-wavelength interferometry that particle densities of order 10{sup 19}/cm{sup 3} are readily achieved and that some intrinsic ionization accompanies the plume formation. Absorption measurements with both 100 picosecond and 125 femtosecond pulses are consistent with observed edge velocities near 10{sup 6} cm/sec. The level of ionization driven by the intense 125 femtosecond laser pulse has been coarsely estimated. Averaged estimates from spectral blue shifting of spectra transmitted through the plume are consistently lower than those obtained from evaluation of saturation intensity thresholds based on the sequential nonresonant optical field ionization (OFI) process.

The Lawrence Livermore National Laboratory has developed a mobile field laboratory for remote measurement of atmospheric processes and observables that are important in global climate change, dispersal of hazardous materials, and atmospheric pollution. Specific observables of interest are water vapor, trace gases, aerosol size and density, wind, and temperature. The goal is to study atmospheric processes continuously for extended periods in remote field locations. This laboratory has just reached field ready status with sensors for aerosol and trace gas measurement based on established techniques. A development program is underway to enhance the sensor suite with several new techniques and instruments that are expected to significantly extend the state of the art in remote trace gas analysis. The new sensors will be incorporated into the lab during the next two years.