The hybrid reactor studies are reviewed. The optimization of the point design and work on a reference design are described. The status of the nuclear analysis of fast spectrum blankets, systems studies for fissile fuel producing hybrid reactor, and the mechanical design of the machine are reviewed. (MHR)

The relationship between the threshold values of ion-temperature-gradient instabilities and the temperature parameters of plasmas is investigated analytically in slab and toroidal geometries separately. It is found that the threshold values increase rapidly when the ion temperature becomes much higher than the electron temperature. The change of the threshold vaues with respect to the ion temperature is quite similar for both geometric models. This finding is consistent with PLT observations. Furthermore, the analytical results also agree with those of the numerical calculations.

The Molten Salt Reactor Experiment design, component development, and engineering analysis is discussed. Materials studies for the Molten-Salt Reactor Program including metallurgy, in-pile tests, chemistry, engineering research, and fuel processing are described. (M.C.G.)

The hazards study was made to determine the radiation level from the secondary sodium lines of the l0-Mw ESCR, and to evaluate the corresponding radioactive concentration in the secondary loop and the maximum permissible effective activation flux in the intermediate heat exchanger. The results are presented graphicallyn the radiation level from the coolant lines during normal operation as a function of line diameter and Na/sup 4/ concentration; the effective thermal neutron activation flux level in the intermediate heat exchanger as a function of the Na/sup 4/ concentration in the secondary loop and the ratio of the time spent in the flux field to the time spent in making one cycle; average Na concentration in the reactor room atmosphere for operative and inoperative ventilation systems, assuming that all the sodium in the secondary system is released to the room and burns; and the downwind concentration of Na/ sup 24/ resulting from the release of all the secondary sodium on an open pad area exterior to the reactor building. An analysis of the results shows that in the event of an accident the toxicological hazards are more severe than the radiological hazards. Recommendations are given for minimizing the toxological hazards. (B.O.G.)

Winding of a Nb--Ti test coil at the Lawrence Livermore Laboratory is nearly complete. The conductor in this coil operates in a maximum field of 7.5 T and provides the 2-T field required by the Mirror Fusion Test Facility. Nb/sub 3/Sn multifilamentary conductors, made using the ''bronze'' technique, appear capable of providing the higher fields needed by commercial reactors.

Retrieval of 5-lb splits of -1/4 inch coal from designated 30-gallon drums was completed. Preparation and analysis of these samples for the second yearly quality evaluation is in progress. After consultation with the DOE Project Manager, two replacement samples were collected. These are the first of the series which will be stored in foil laminate bags. Both of these samples were placed in 30 gallon steel drums lined with polyethylene bags at the mine site. They were equipped with lid gaskets made from Tygon tubing, and 1/4 in. metal tubing fittings to purge and pressurize the drum with argon.

The direct-interaction approximation is used to find statistically steady states of a system of three modes, with complex frequencies, coupled by a quadratic nonlinearity. These states are compared to the exact predictions of an ensemble of realizations with Gaussianly distributed initial conditions. The direct-interaction approximation is shown to be reasonably successful in this context.

The critical components of the glass furnace subject to corrosion/erosion are: the valve gate and the valve seat bottom and sides which can also be subject to warpage causing subsequent leakage and the furnace flues (or ducting). The Brayton System will be added to the glass furnace just downstream of the reversal valve. Hence, the inlet air to the flues will no longer be at ambient temperature but at a higher level between 800 to 1000/sup 0/F. Also, the exhaust gas for the Brayton System is required to be 1500 to 1600/sup 0/F at these locations. Thus, the flues and valve components will be exposed to a much higher average temperature operating with the Brayton System. The possibility of cracking of the refractory linings and warpage and scaling of the switching valve, with consequent leakage to the exhaust stream should be avoided or decreased as much as feasible because of its effect of lowering the turbine inlet temperature and thus the total system value. On the inlet side, leakage dilutes the heat added to the air (which is preheated) and reduces the expected fuel savings. Assessment of such effects and determination of potential solutions and/or improvements in these areas is …

High luminosity will be necessary for the study of many of the new phenomena expected in the SSC energy region. Particle detectors, however, are limited in the number of simultaneous interactions which they can handle, and thus need a good duty cycle with collisions spread out in time to the greatest extent possible. To avoid the larger number of stored protons required for continuous beams, we have considered bunched beams of protons crossing at a small angle. Plots are given of the dependence on bunch separation of the emittance, number of protons, etc., needed for 10/sup 33/ cm/sup -2/ sec/sup -1/. In order to minimize the number of stored protons (approx. 10/sup 14//ring), an emittance roughly ten times smaller than that presently achieved at high energies is required for a bunch separation of 6 meters (20 nsec).

In 1981, the joint ORNL/PPPL PDX neutral beam heating project succeeded in reliably injecting 7.2 MW of D/sup 0/ into the PDX plasma, at nearly perpendicular angles, and achieved ion temperatures up to 6.5 keV. The expeditious achievement of this result was due to the thorough conditioning and qualification of the PDX neutral beam ion sources at ORNL prior to delivery coupled with several field design changes and improvements in the injection system made at PPPL as a result of neutral beam operating experience with the PLT tokamak. It has been found that the operation of high power neutral beam injection systems in a tokamak-neutral beam environment requires procedures and performance different from those required for development operation on test stands. In this paper, we review the installatin of the PDX neutral beam injection system, and its operation and performance during the initial high power plasma heating experiments with the PDX tokamak.

It is well known that in ideal magnetohydrodynamics there is a continuous spectrum of real frequencies associated with a singularity of the shear Alfven waves on the surface k/sub parallel to/v/sub A/ = omega. It is also known that the introduction of first-order gyroradius effects eliminates the continuum. In the present work we examine the influence of the full gyroradius response and of dissipation on the continuum. In the absence of dissipation we first confirm that if only first-order gyroradius effects are incorporated, the continuum disappears. However, when the full gyroradius response is included, this discrete spectrum vanishes, and a new continuum (associated with singularities at k/sub parallel to/v/sub A/ = 0) appears. The introduction of collisional dissipation removes the original MHD continuum leaving discrete modes whose frequency tends to zero with the collision rate as ..nu../sup 1/3/. collisions also remove the new continuum of the full gyroradius model leaving discrete modes whose frequency tends to zero as (log ..nu..)/sup -1/. Collisionless Landau damping has a similar effect.

N{sup 12} is shown to have a half life of 12.5 {+-} 1 milliseconds, and a positron upper limit of 16.6 {+-} 0.2 Mev. It is produced by the reaction C{sup 12}(p,n)N{sup 12}, and has a threshold proton energy of 20.0 Mev. This indicates that N{sup 12} is within about 200 Kev of being unstable against proton emission. The mass of N{sup 12} is 12.0228 {+-} 0.00015, and the beta transition is allowed.

Understanding the influence of past land use changes on climate is needed to improve regional projections of future climate change and inform debates about the tradeoffs associated with land use decisions. The effects of rapid expansion of irrigated area in the 20th century has remained unclear relative to other land use changes, such as urbanization, that affected a similar total land area. Using spatial and temporal variations in temperature and irrigation extent observed in California, we show that irrigation expansion has had a large cooling effect on summertime average daily daytime temperatures (-0.15 to -0.25 C.decade{sup -1}), which corresponds to a cooling estimated at -2.0 - -3.3 C since the introduction of irrigation practice. Irrigation has negligible effects on nighttime temperatures, leading to a net cooling effect of irrigation on climate (-0.06 to -0.19 C.decade{sup -1}). Stabilization of irrigated area has occurred in California since 1980 and is expected in the near future for most irrigated regions. The suppression of past human-induced greenhouse warming by increased irrigation is therefore likely to slow in the future, and a potential decrease in irrigation may even contribute to a more rapid warming. Changes in irrigation alone are not expected to influence broadscale temperatures, …

In this study, we investigated {gamma}H2AX{sup ser139} and 53BP1{sup ser25}, DNA damage pathway markers, to observe responses to radiation insult. Two Human Mammary Epithelial Cell (HMEC) lines were utilized to research the role of immortalization in DNA damage marker expression, HMEC HMT-3522 (S1) with an infinite lifespan, and a subtype of HMEC 184 (184V) with a finite lifespan. Cells were irradiated with 50 cGy X-rays, fixed with 4% paraformaldehyde after 1 hour repair at 37 C, and processed through immunofluorescence. Cells were visualized with a fluorescent microscope and images were digitally captured using Image-Pro Plus software. The 184V irradiated cells exhibited a more positive punctate response within the nucleus for both DNA damage markers compared to the S1 irradiated cells. We will expand the dose and time course in future studies to augment the preliminary data from this research. It is important to understand whether the process of transformation to immortalization compromises the DNA damage sensor and repair process proteins of HMECs in order to understand what is 'normal' and to evaluate the usefulness of cell lines as experimental models.

This report presents the results of measurements and simulations performed with 12 small plastic scintillation detectors manufactured by Scionix for imaging applications. The scintillator is equivalent to a Bicron BC-420 plastic scintillator. A gamma calibration is presented to determine the voltage to be applied on each detector to ensure uniform detector operation. Time of flight measurements performed with a Cf-252 source are also presented. Comparisons between experimental data and data from the Monte Carlo simulations show good agreement for time lags of 0 to 70 ns.

The analysis of surface heat fluxes and sounding profiles from SHEBA indicated possible significant effects of subsidence on the structure of stably-stratified ABLs (Mirocha et al. 2005). In this study the influence of the large-scale subsidence rate on the stably stratified atmospheric boundary layer (ABL) over the Arctic Ocean during clear sky, winter conditions is investigated using a large-eddy simulation model. Simulations are conducted while varying the subsidence rate between 0, 0.001 and 0.002 ms{sup -1}, and the resulting quasi-equilibrium ABL structure and evolution are examined. Simulations conducted without subsidence yield ABLs that are deeper, more strongly mixed, and cool much more rapidly than were observed. The addition of a small subsidence rate significantly improves agreement between the simulations and observations regarding the ABL height, potential temperature profiles and bulk heating rates. Subsidence likewise alters the shapes of the surface-layer flux, stress and shear profiles, resulting in increased vertical transport of heat while decreasing vertical momentum transport. A brief discussion of the relevance of these results to parameterization of the stable ABL under subsiding conditions in large-scale numerical weather and climate prediction models is presented.

This study group was initiated to consider whether there were any "show-stopper" issues with accelerators for heavy-ion warm-dense matter (WDM) and heavy-ion inertial fusion energy (HIF), and to prioritize them. Showstopper issues appear to be categorized as limits to beam current; that is, the beam is expected to e well-behaved below the current limit, and significantly degraded in current or emittance if the current limit is exceeded at some region of an accelerator. We identified 14 issues: 1-6 could be addressed in the near term, 7-10 may provide attractive solutions to performance and cost issues, 11-12 address multibeam effects that cannot be more than partially studied in near-term facilities, and 13-14 address new issues that are present in some novel driver concepts. Comparing the issues with the new experimental, simulation, and theroretical tools that we have developed, it is apparent that our new capabilities provide an opportunity to reexamine and significantly increase our understanding of the number one issue - halo growth and mitigation.

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is employed to examine specific features observed on a polycrystalline depleted uranium sample after exposure to high purity D{sub 2} gas. The ToF-SIMS investigation, being the first of its kind on uranium, investigates a site where the deuterated form of uranium hydride (UD{sub 3}) is clearly observed to have broken through the thin, air-formed oxide. Density functional theory calculations have been performed, which confirm the stability of, and also assign structural geometries to, the various uranium containing fragments observed with SIMS. An inclusion site was also investigated using ToF-SIMS, and these data suggest that the edges of such inclusions exhibit increased D ion, and hence H ion, diffusion when compared to the surrounding surface oxide. These results offer support to the previously published hypotheses that inclusion sites on uranium surfaces exhibit an increased probability to form hydride sites under H{sub 2} exposure.

Scanning white beam X-ray microdiffraction has been used to study the heterogeneous grain deformation in a polycrystalline Mg alloy (MgAZ31). The high spatial resolution achieved on beamline 7.3.3 at the Advanced Light Source provides a unique method to measure the elastic strain and orientation of single grains as a function of applied load. To carry out in-situmeasurements a light weight (~;;0.5kg) tensile stage, capable of providing uniaxial loads of up to 600kg, was designed to collect diffraction data on the loading and unloading cycle. In-situ observation of the deformation process provides insight about the crystallographic deformation mode via twinning and dislocation slip.

Since its introduction in the consumer market at the beginning of 1990s by Sony Corporation ‘Li-ion rechargeable battery’ and ‘LiCoO2 cathode’ is an inseparable couple for highly reliable practical applications. However, a separation is inevitable as Li-ion rechargeable battery industry demand more and more from this well serving cathode. Spinel-type lithium manganate (e.g., LiMn2O4), lithium-based layered oxide materials (e.g., LiNiO2) and lithium-based olivine-type compounds (e.g., LiFePO4) are nowadays being extensively studied for application as alternate cathode materials in Li-ion rechargeable batteries. Primary goal of this project was the advancement of Li-ion rechargeable battery to meet the future demands of the energy sector. Major part of the research emphasized on the investigation of electrodes and solid electrolyte materials for improving the charge transport properties in Li-ion rechargeable batteries. Theoretical computational methods were used to select electrodes and electrolyte material with enhanced structural and physical properties. The effect of nano-particles on enhancing the battery performance was also examined. Satisfactory progress has been made in the bulk form and our efforts on realizing micro-battery based on thin films is close to give dividend and work is progressing well in this direction.

It is a common practice to estimate site desorption rate from crystal surfaces with an Arrhenius expression of the form v{sub eff} exp(-{Delta}E/k{sub B}T), where {Delta}E is an activation barrier to desorb and v{sub eff} is an effective vibrational frequency {approx} 10{sup 12} sec{sup -1}. However, such a formula can lead to several to many orders of magnitude underestimation of sublimation rates in molecular crystals due to internal degrees of freedom. We carry out a quantitative comparison of two energetic molecular crystals with crystals of smaller entities like ice and Argon (solid) and uncover the errors involved as a function of molecule size. In the process, we also develop a formal definition of v{sub eff} and an accurate working expression for equilibrium vapor pressure.

Ni-base alloys were considered for the Prometheus space reactor pressure vessel with operational parameters of {approx}900 K for 15 years and fluences up to 160 x 10{sup 20} n/cm{sup 2} (E > 0.1 MeV). This paper reviews the effects of irradiation on the behavior of Ni-base alloys and shows that radiation-induced swelling and creep are minor considerations compared to significant embrittlement with neutron ,exposure. While the mechanism responsible for radiation-induced embrittlement is not fully understood, it is likely a combination of helium embrittlement and solute segregation that can be highly dependent on the alloy composition and exposure conditions. Transmutation calculations show that detrimental helium levels would be expected at the end of life for the inner safety rod vessel (thimble) and possibly the outer pressure vessel, primarily from high energy (E > 1 MeV) n,{alpha} reactions with {sup 58}Ni. Helium from {sup 10}B is significant only for the outer vessel due to the proximity of the outer vessel to the Be0 control elements. Recommendations for further assessments of the material behavior and methods to minimize the effects of radiation damage through alloy design are provided.

Devices are increasingly vulnerable to soft errors as their feature sizes shrink. Previously, soft error rates were significant primarily in space and high-atmospheric computing. Modern architectures now use features so small at sufficiently low voltages that soft errors are becoming important even at terrestrial altitudes. Due to their large number of components, supercomputers are particularly susceptible to soft errors. Since many large scale parallel scientific applications use iterative linear algebra methods, the soft error vulnerability of these methods constitutes a large fraction of the applications overall vulnerability. Many users consider these methods invulnerable to most soft errors since they converge from an imprecise solution to a precise one. However, we show in this paper that iterative methods are vulnerable to soft errors, exhibiting both silent data corruptions and poor ability to detect errors. Further, we evaluate a variety of soft error detection and tolerance techniques, including checkpointing, linear matrix encodings, and residual tracking techniques.

None