Report discussing the longitudinal static and dynamic stability, overall duct performance, drag, and some static and dynamic lateral-stability data obtained from testing of the Chance Vought Regulus II missile. Five different models with various modifications were used in the investigation.

Report presenting an investigation in the 10- by 10-foot supersonic wind tunnel to evaluate the performance of a shrouded injector burner with perforated domes employed in a 28-inch ramjet using gaseous hydrogen as fuel. Steady-state data were obtained at a pressure altitude of 77,000 feet and zero angle of attack. Results indicated that burning could be initiated under severe distortion conditions and that satisfactory combustor operation was accomplished up to a pressure altitude of 110,000 feet with no adverse effect on combustion efficiency.

Memorandum presenting an investigation conducted in the 10- by 10-foot supersonic wind tunnel to evaluate the performance of a shrouded injector burner with perforated domes employed in a 28-inch ramjet using gaseous hydrogen as fuel. Steady-state data were obtained at a pressure altitude of 77,000 feet and zero angle of attack. Results of the investigation showed that burning could be initiated under severe distortion conditions and that satisfactory combustor operation was accomplished up to a pressure altitude of 110,000 feet with no adverse effect on combustion efficiency.

Report discussing the boundary-layer transition and heat-transfer measurements for a model of the Titan intercontinental ballistic missile up to a specified Mach and Reynolds number. Boundary-layer transition was observed on the nose of the missile. The drag coefficient for a variety of Mach numbers was also obtained.

"Boundary-layer transition and heat-transfer measurements were obtained from a flight test of a 1/18-scale model of the Titan intercontinental ballistic missile up to a Mach number of 3.95 and a Reynolds number per foot of 23 x 10(exp 6). Boundary-layer transition was observed on the nose of the model. Available theories predicted heat-transfer coefficients reasonably well for the fully laminar or turbulent flow conditions. The drag coefficient of the configuration was also obtained for a Mach number range of 1.25 to 3.75" (p. 1).

Report presenting the results of an investigation to determine the effects of full-span trailing-edge flaps on the static longitudinal characteristics of a triangular wing-body combination. Data was obtained for the basic configuration and for a wing with the control surfaces deflected for longitudinal control.

Report presenting a rocket-powered free-flight model of an interceptor-type airplane with an overhanging tail boom with the jet on and off at a range of Mach numbers. Results regarding longitudinal trim, drag, and lift are provided.

Report presenting an investigation to determine the static longitudinal and lateral stability characteristics of a model of X-1E airplane at combined angles of attack and sideslip. Results regarding the static longitudinal and lateral force and moment characteristics and stability derivatives are provided.

From Introduction: "The objective of this report are (1) to describe the complete fuel system, (2) to discuss the procedure used for transitions between JP-4 fuel and hydrogen, and (3) to present and discuss engine performance obtained with both fuels, and (4) to review the reliability of the fuel system."

Report presenting an investigation of a liquid-hydrogen fuel system developed to operate one of the turbojet engines in a twin-engine light bomber at an altitude of 50,000 feet and Mach number 0.75. The heat exchanger was evaluated in an altitude test chamber in conjunction with the complete aircraft fuel system. Results regarding calculated heat-exchanger performance, experimental heat-exchanger performance, and reliability are provided.

Report presenting a liquid-hydrogen fuel system developed to operate one of the turbojet engines in a twin-engine light bomber at an altitude of 50,000 feet and Mach number 0.75. A ram-air heat exchanger was used to vaporize liquid hydrogen. Results regarding calculated heat-exchanger performance, experimental heat-exchanger performance, and reliability are provided.

Memorandum presenting the system analysis, design, and performance of a control system for an experimental flight-type hydrogen fuel system. The fuel system was designed to investigate some of the problems associated with the utilization of hydrogen as an aircraft fuel. Speed control of the engine was obtained by coupling the hydrogen regulator to the JP-4 fuel control.

Report presenting the system analysis, design, and performance of a control system for an experimental flight-type hydrogen fuel system. The system was designed to explore some problems associated using hydrogen as an aircraft fuel. Results regarding the steady-state response, transient response, and performance in engine-speed loop for the system are provided.

Memorandum presenting testing of a twin-engine light bomber modified to utilize hydrogen fuel in one of the two engines during flight at an altitude of 50,000 feet. Three completely successful flights were made using hydrogen fuel. Data are presented to show the effect of tank agitation on fuel pressure and fuel losses.

Report presents a comparison of turbofan and turbojet engines for Mach numbers of up to 3.0 and conventional hydrocarbon fuels. There are four parts of the report: a cycle analysis of turbofan engines and information about their designs, a comparison of several commercial engines proposed for the Air Force, component performance and development problems for turbofan and turbojet engines, and a summary and conclusions based on mission studies.

Report presenting a simplified analog simulator that can be used to predict the minimum comfortable approach speeds that could be used in carrier landings for airplanes that are limited by their ability to control altitude. Predicted speeds from initial tests on several planes are compared with values from flight tests in order to indicate the validity of simulator results.

Report presenting a brief summary of current loads information at hypersonic speeds and some ways of estimating the loads on aircraft components when designing an aircraft.

An investigation was made in the Langley stability tunnel to study the influence of number of fins, fin shrouding, and fin aspect ratio on the spin instability of mortar-shell tail surfaces. It was found that the 12-fin tails tested spun less rapidly throughout the angle-of-yaw range than did the 6-fin tails and that fin shrouding reduced the spin encountered by a large amount.

From Introduction: "In the present report, the concept of velocity diffusion is applied in an analysis of blade losses expressed in terms of the fundamental parameter of wake momentum thickness. Restrictions and limitations involved in the application of the results to cascade performance analyses are discussed."

Report presenting an investigation in the high-speed tunnel to determine the static aerodynamic forces and moments on a missile model during simulated launching from midsemispan locations of various types of wings. The purpose of the investigation is to determine the nature and origin of the mutual interference experienced by various combinations of wing-fuselage models and externally carried missiles. Results regarding isolated missile characteristics, the effect of varying chordwise position, effects of angle of attack and Mach number, effect of airplane wing geometric characteristics, effect of missile spanwise location, and comparison of wing-fuselage and fuselage effects on the missile forces and moments are provided.

Wedge and scoop air inlet performance and thrust minus drag comparisons at free stream in supersonic wind tunnel test.

Two normal -wedge-inlet configurations (straight and sweptback splitter plates) were investigated in the Lewis 8- by 6-foot supersonic wind tunnel at Mach numbers of 1.50 to 1.99. Negligible differences occurred in the performances of the two normal-wedge inlets. In comparison with a previously tested scoop inlet, the normal-wedge configuration showed superior thrust-minus-drag characteristics at Mach 1.99. However the scoop inlet was better at Mach numbers of 1.80 and 1.50.

Report presenting a wind-tunnel investigation at Reynolds numbers of about 7,000,000 based on the mean aerodynamic chord of the wing and over a range of Mach numbers. Two airfoils were tested to evaluate the effect of a large leading-edge radius with increased thickness over the forward 40 percent of the chord on the reliability of the predictions of the supersonic area rule. Results regarding the comparison of basic- and modified-wing models, comparison of experimental and computed drag coefficients, and a comparison of indentations are provided.

Report presenting a free-flight rocket-propelled model investigation at Mach numbers from 1.2 to 1.9 to determine the longitudinal and lateral aerodynamic characteristics of a low-drag aircraft configuration. Aerodynamic data in pitch, yaw, and roll were obtained from transient motions induced by small pulse rockets firing at intervals.