This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted in the fourth quarter of 1990. It includes the analytical data, field data, well activity data, and other documentation for this program, provides a record of the program's activities and rationale, and serves as an official document of the analytical results. The groundwater monitoring program includes the following activities: installation, maintenance, and abandonment of monitoring wells, environmental soil borings, development of the sampling and analytical schedule, collection and analyses of groundwater samples, review of analytical and other data, maintenance of the databases containing groundwater monitoring data, quality assurance (QA) evaluations of laboratory performance, and reports of results to waste-site facility custodians and to the Environmental Protection Section (EPS) of EPD.

Under certain assumed accidents, an SRS reactor may lose most of its bulk moderator while maintaining flow to fuel assemblies. If this occurs immediately after operation at power, components normally dependent on convective heat transfer to the moderator will heat up with the possibility of melting that component. One component at risk is the currently used cadmium safety rod. A substitute safety rod consisting solely of sintered B{sub 4}C and stainless steel has been designed which is capable of withstanding much higher temperatures. This memorandum provides the physics basis for the adequacy of the rod for reactor shutdown and provides a set of criteria for acceptance in the NTG tests. This memorandum provides physics data for other aspects of operation. These include: Heat production and helium production, along with related phenomena, resulting from inadvertent irradiation at power. Gamma heat input under drained tank conditions. An equivalent rod design suitable for charge design and safety analyses. Degradation under normal operation. Thermal flux ripple in adjacent fuel due to axial striping of alternate B{sub 4}C and steel pellets. Possible effect on safety analyses. Safety rod withdrawal during reactor startup.

The following topics are discussed on the Brookhaven electron analogue: L.J. Haworth and E.L. VanHorn letters; Original G.K. Green outline for report; General description; Parameter list; Mechanical Assembly; Alignment; Degaussing; Vacuum System; Injection System; The pulsed inflector; RF System; Ferrite Cavity; Pick-up electrodes and preamplifiers; Radio Frequency power amplifier; Lens supply; Controls and Power; and RF acceleration summary.

We introduce a new spatial discretization scheme for transport on arbitrary spatial grids in XY geometry. Our arbitrary'' spatial grid is composed of arbitrarily-connected polygons, each of which may have an arbitrary number of sides. We begin our derivation by imposing particle balance on every corner'' of each cell (Consequently, we call our scheme the corner-balance (CB) method.) We complete the derivation by introducing simple closure formulas that relate volume-averaged unknowns to surface-averaged unknowns in each corner. We discuss the relationship of the new scheme to discontinuous finite-element methods and to multiple-balance methods. We demonstrate that on simple grids, the method reduces to very robust schemes that have been studied previously. We discuss the theoretical performance of the method in the thick diffusion limit, and provide numerical results for that limit. We present additional numerical results from simple problems that test the new scheme in other limits. Finally, we offer some concluding remarks about the method. 9 refs., 6 figs.

Design studies for recombination x-ray lasers based on plasmas ionized by high intensity, short pulse optical lasers are presented. Transient lasing on n = 3 to n = 2 transitions in Lithium-like Neon allows for moderately short wavelengths ({le} 100{angstrom}) without requiring ionizing intensities associated with relativistic electron quiver energies. The electron energy distribution following the ionizing pulse affects directly the predicted gains for this resonance transition. Efficiencies of 10{sup {minus}6} or greater are found for plasma temperatures in the vicinity of 40 eV. Simulation studies of parametric heating phenomena relating to stimulated Raman and Compton scattering are presented. For electron densities less than about 2.5 {times} 10{sup 20} cm{sup {minus}3} and peak driver intensity of 2 {times} 10{sup 17} W/cm{sup 2} at 0.25 {mu}m with pulse length of 100 fsec, the amount of electron heating is found to be marginally significant. For Lithium-like Aluminum, the required relativistic ionizing intensity gives excessive electron heating and reduced efficiency, thereby rendering this scheme impractical for generating shorter wavelength lasing ({le} 50{angstrom}) in the transient case. Following the transient lasing phase, a slow hydrodynamic expansion into the surrounding cool plasma is accompanied by quasi-static gain on the n = 4 to n = …

Under the provisions of an Interagency Agreement between the US Army and the Department of Energy, Martin Marietta Energy Systems, Inc., through the Oak Ridge National Laboratory, is evaluating the Utilities and Energy Monitoring and Control System (UEMCS) installed at the US Military Community Activity at Goeppingen, Germany. This evaluation relies on examination of existing data and information to determine the effectiveness of the UEMCS. The Goeppingen UEMCS is an integral part of a combined UEMCS/district heating system which includes the UEMCS at Schwaebisch Gmuend, Germany. The system was installed during 1985 and 1986. The UEMCS at Goeppingen and Schwaebisch Gmuend are both well designed, implemented, and maintained. The UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS at Schwaebisch Gmuend does not have a central computer, but requires only a dedicated phone line to couple with the one at Goeppingen. Though the conversion to district heat has produced the majority of energy savings, the UEMCS day/night setback program also contributes substantially, with additional savings from start/stop programs, such as seasonal switchover, and various temperature control …

A per the DOE Cooperative Agreement No. DE-FC22-91PC90550 dated March 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phase I, IIA, and IIB of the Integrated Dry NO{sub x}/SO{sub 2} Emissions Control System Project. This project includes Low NO{sub x} Burners with post firing air injection, humidification, and dry sorbent injection. This quarterly report covers the quarterly period April, May, and June, 1991. This report covers project activities for the second three months period of the project.

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production distribution consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. The data in this publication are collected on surveys conducted by the EIA to fulfill its responsibilities for gathering and reporting energy data. Some of the data are collected under the authority of the Federal Energy Regulatory Commission (FERC), an independent commission within the DOE, which has jurisdiction primarily in the regulation of electric utilities and the interstate natural gas industry. Geographic coverage is the 50 States and the District of Columbia.

A meeting was held on October 15, 16, 17, 1990 to discuss the state of tritium safety and environmental effects. The meeting was organized with the help of the International Energy Agency planning committee consisting of K. Steinmetz, Y. Seki, G. Nardella, and G. Vivian. Representative of tritium production facilities and heavy water reactor power production were also involved. The meeting was organized to address seven topics in tritium safety that were thought to require further work. The topics were: (1) materials science, (2) environmental models, (3) environmental model validation, (4) tritiated organic compounds, (5) human dosimetry, (6) tritium sampling and measurement, and (7) long-term environmental databases.

The major thrust of the research has been the quantification of the excited states of inorganic complexes that display potential for mediating charge-separation processes. Investigations of copper(1) mixed-ligand complexes have been completed. Non-equilibrated emitting states have been assigned. Chemical tuning of the emission energy by modifying the basicity of the donor ligand on the metal has been achieved. Structure-property relationships have been defined for crystalline complexes of zinc containing both diimine and monothiol ligands. Correlation of the spectral shifts with the rotations of the thiol phenyl rings in different crystal phases has been shown by comparing with extended Huckel calculations and x-ray structures. Complexes of zinc containing diimine and dithiol ligands are shown to be polynuclear species. A trinuclear species can be forced to assume a binuclear structure by incorporating other non-coordinating ligands into the lattice. The transformation is accompanied by substantial photophysical changes. Syntheses and x-ray structure determinations of platinum(2) complexes containing diimine ligands only, both diimine and dithiol ligands, and dithiol ligands only have been completed. An unusual platinum(3) bis(dithiol) species has been obtained and its structure determined. Investigations of the emission spectra of bis(bipyridine)platinum(2) have revealed the existence of multiple emitting states with both ligand-localized and charge- …

The HFBR Unirradiated Fuel Shipping Container was designed and fabricated at the Oak Ridge National Laboratory in 1978 for the transport of fuel for the High Flux Beam Reactor (HFBR) for Brookhaven National Laboratory. The package has been evaluated analytically, as well as the comparison to tests on similar packages, to demonstrate compliance with the applicable regulations governing packages in which radioactive and fissile materials are transported. The contents of this Safety Analysis Report for Packaging (SARP) are based on Regulatory Guide 7.9 (proposed Revision 2 - May 1986), 10 CFR Part 71, DOE Order 1540.2, DOE Order 5480.3, and 49 CFR Part 173.

The preparation and study of an intense source of neutrinos in the form of neutron irradiated materials which are enriched in Cr-50 for use in the GALLEX solar neutrino experiment are discussed. Chromyl fluoride gas is enriched in the Cr-50 isotope by gas centrifugation and subsequently converted to a very stable form of chromium oxide. The results of neutron activation analyses of such chromium samples indicate low levels of any long-lived activities, but show that short-lived activities, in particular Na-24, may be of concern. These results show that irradiating chromium oxide enriched in Cr-50 is preferable to irradiating either natural chromium or argon gas as a means of producing a neutrino source to calibrate the GALLEX detector. These results of the impurity level analysis of the enriched chromyl fluoride gas and its conversion to the oxide are also of interest to work in progress by other members of the Collaboration investigating an alternative conversion of the enriched gas to chromium metal. 35 refs., 12 figs., 5 tabs.

An advanced electronically ballasted lighting control system was installed in a portion of an office building to measure the energy and demand savings. The lighting control system used an integrated lighting control scenario that included daylight following, lumen depreciation correction, and scheduling. The system reduced lighting energy on weekdays by 62% and 51% in the north and south daylit zones, respectively, compared to a reference zone that did not have controls. During the summer, over 75% energy savings were achieved on weekdays in the north daylit zone. Even in the south interior zone, which benefitted lime from daylight, correction strategies and adjustment of the aisleway lights to a low level resulted in energy use of only half that of the reference zone. Although, in general, the savings varied over the year due to changing daylight conditions, the energy reduction achieved with controls could be fit using a simple analytical model. Significant savings also occurred during core operating hours when it is more expensive to supply and use energy. Compared to the usage in the reference zone, energy reductions of 49%, 44%, and 62% were measured in the south daylight, south interior, and north daylight zones, respectively, during core operating hours …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The following topics are discussed on the Brookhaven electron analogue: L.J. Haworth and E.L. VanHorn letters; Original G.K. Green outline for report; General description; Parameter list; Mechanical Assembly; Alignment; Degaussing; Vacuum System; Injection System; The pulsed inflector; RF System; Ferrite Cavity; Pick-up electrodes and preamplifiers; Radio Frequency power amplifier; Lens supply; Controls and Power; and RF acceleration summary.

We have continued our work on elucidating the underlying principles that govern chemical reactions occurring on bimetallic and alloy surfaces. Our goal is to aid in the atomic level explanation of the reactivity and selectivity of alloy and bimetallic cluster catalysts and to provide a fundamental basis for the design of new catalysts with improved performance. Our approach is to use a battery of surface science methods to obtain fundamental data on the thermochemistry and kinetics of the adsorption and reaction of molecules on extensively characterized, single-crystal bimetallic surfaces. We measure changes in chemisorption bond strength, adsorption site distributions, and hydrocarbon fragment stability and reactivity and correlate these results with the geometric and electronic structure of the metal atoms on the surface. Often, our aim is to carefully design experiments that isolate the several factors (e.g., ensemble and ligand effects) that control surface chemistry and catalysis on bimetallic and alloy surfaces in order to better understand the importance of each contribution. In the past 18 months, we have continued to study how alkali promoters strongly affect the reactions of hydrocarbons on Pt and Ni surfaces by altering the electronic structure and inducing significant site-blocking effects. We have shown that bismuth …

Under certain assumed accidents, an SRS reactor may lose most of its bulk moderator while maintaining flow to fuel assemblies. If this occurs immediately after operation at power, components normally dependent on convective heat transfer to the moderator will heat up with the possibility of melting that component. One component at risk is the currently used cadmium safety rod. A substitute safety rod consisting solely of sintered B{sub 4}C and stainless steel has been designed which is capable of withstanding much higher temperatures. This memorandum provides the physics basis for the adequacy of the rod for reactor shutdown and provides a set of criteria for acceptance in the NTG tests. This memorandum provides physics data for other aspects of operation. These include: Heat production and helium production, along with related phenomena, resulting from inadvertent irradiation at power. Gamma heat input under drained tank conditions. An equivalent rod design suitable for charge design and safety analyses. Degradation under normal operation. Thermal flux ripple in adjacent fuel due to axial striping of alternate B{sub 4}C and steel pellets. Possible effect on safety analyses. Safety rod withdrawal during reactor startup.

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted in the fourth quarter of 1990. It includes the analytical data, field data, well activity data, and other documentation for this program, provides a record of the program`s activities and rationale, and serves as an official document of the analytical results. The groundwater monitoring program includes the following activities: installation, maintenance, and abandonment of monitoring wells, environmental soil borings, development of the sampling and analytical schedule, collection and analyses of groundwater samples, review of analytical and other data, maintenance of the databases containing groundwater monitoring data, quality assurance (QA) evaluations of laboratory performance, and reports of results to waste-site facility custodians and to the Environmental Protection Section (EPS) of EPD.

Under the provisions of an Interagency Agreement between the US Army and the Department of Energy, Martin Marietta Energy Systems, Inc., through the Oak Ridge National Laboratory, is evaluating the Utilities and Energy Monitoring and Control System (UEMCS) installed at the US Military Community Activity at Goeppingen, Germany. This evaluation relies on examination of existing data and information to determine the effectiveness of the UEMCS. The Goeppingen UEMCS is an integral part of a combined UEMCS/district heating system which includes the UEMCS at Schwaebisch Gmuend, Germany. The system was installed during 1985 and 1986. The UEMCS at Goeppingen and Schwaebisch Gmuend are both well designed, implemented, and maintained. The UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS at Schwaebisch Gmuend does not have a central computer, but requires only a dedicated phone line to couple with the one at Goeppingen. Though the conversion to district heat has produced the majority of energy savings, the UEMCS day/night setback program also contributes substantially, with additional savings from start/stop programs, such as seasonal switchover, and various temperature control …

In spite of the significant amount of work already reported in the scientific literature, many aspects of the origin of Banded Iron Formations (BIF) remain enigmatic. The authors demonstrate that mineralogic microbanding in BIF is accompanied by autocorrelated isotopic microbanding of organic carbon and carbonate carbon and oxygen. They propose that these isotopic patterns formed as a result of episodic mixing of waters in the depositional environment of BIF.

Our work on single election transfer in coals led us to the knowledge that the energetics of bond cleavage in radical cations is 20-40 kcal/mole lower than the corresponding homolytic bond cleavage energies. Having made excellent progress in the other areas covered by this proposal, we are extending our studies to the investigation of the formation and cleavage reaction of radical cations in coals. The formation of a radical cation requires the transfer of an electron from a neutral molecule to an appropriate electron acceptor (oxidant). As a first step, we seek oxidants which will form radical cations from functional groups typical of those in coals. We must also study the decomposition behavior of bonds typical of those found in coals. Alkyl and alkoxy aromatic compounds were chosen as the electron donors because of their common occurrence in coals.

An advanced electronically ballasted lighting control system was installed in a portion of an office building to measure the energy and demand savings. The lighting control system used an integrated lighting control scenario that included daylight following, lumen depreciation correction, and scheduling. The system reduced lighting energy on weekdays by 62% and 51% in the north and south daylit zones, respectively, compared to a reference zone that did not have controls. During the summer, over 75% energy savings were achieved on weekdays in the north daylit zone. Even in the south interior zone, which benefitted lime from daylight, correction strategies and adjustment of the aisleway lights to a low level resulted in energy use of only half that of the reference zone. Although, in general, the savings varied over the year due to changing daylight conditions, the energy reduction achieved with controls could be fit using a simple analytical model. Significant savings also occurred during core operating hours when it is more expensive to supply and use energy. Compared to the usage in the reference zone, energy reductions of 49%, 44%, and 62% were measured in the south daylight, south interior, and north daylight zones, respectively, during core operating hours …