This report presents the analysis of the LOFT pressurizer spray and surge nozzles to include a 450/sup 0/F step thermal transient. Previous analysis performed under subcontract by Basic Technology Incorporated was utilized where applicable. The SAASIII finite element computer program was used to determine stress distributions in the nozzles due to the step transient. Computer results were then incorporated in the necessary additional calculations to ascertain that stress limitations were not exceeded. The results of the analysis indicate that both the spray and surge nozzles will be within stress allowables prescribed by subsubarticle NB-3220 of the 1974 edition of the ASME Boiler and Pressure Vessel Code when subjected to currently known design, normal operating, upset, emergency, and faulted condition loads.

This report discusses international cooperation in marine science through the Intergovernmental Oceanographic Commission (IOC) and the structure and activities of the organization.

This report data within the military from the past and present.

This report discusses congressional information resources and their influence in allowing Congress to address national policy issues well.

Under Contract 3772003 to the Lawrence Livermore Laboratory, Aerojet ElectroSystems Company has investigated a number of alignment system design topics for the NOVA and SHIVA upgrade lasers. Prior reports dealt with the Main Beam Alignment System, and with Multipass Amplifier Alignment Concepts. This report, which completes the contract, examines ways in which the Return Beam Diagnostic (RBD) package and Incident Beam Diagnostic (IBD) packages may be reconfigured to a more integrated package. In particular, the report shows that the RBD optics may be directly integrated in the Pointing Focus and Centering (PFC) sensor, and that the IBD optics may use the same basic common configuration as the PFC/RBD package.

The Remote Working Level Monitor (RWLM) is an instrument used to remotely monitor the RN-daughter concentrations and the Working Level (WL). It is an ac powered, microprocessor based instrument which multiplexes two independent detector units to a single central processor unit (CPU). The CPU controls the actuation of the detector units and processes and outputs the data received from these remote detector units. The remote detector units are fully automated and require no manual operation once they are set up. They detect and separate the alpha emitters of RaA and RaC' as well as detecting the beta emitters of RaB and RaC. The resultant pulses from these detected radioisotopes are transmitted to the CPU for processing. The programmed microprocessor performs the mathematical manipulations necessary to output accurate Rn-daughter concentrations and the WL. A special subroutine within the program enables the RWLM to run and output a calibration procedure on command. The data resulting from this request can then be processed in a separate program on most computers capable of BASIC programming. The calibration program results in the derivation of coefficients and beta efficiencies which provides calibrated coefficients and beta efficiencies.

None

Technical projects, facility projects, planning and analysis, and regulatory affairs are reported for OWI's portion of the National Waste Terminal Storage program. (DLC)

The goal of the Piqua, Ohio District Heating and Cooling Demonstration Project is to demonstrate the feasibility and efficiency of using cogenerated thermal energy from the City's Municipal Power Plant to provide residential, commercial and industrial space heating and cooling and satisfy other community energy needs as appropriate. Progress in four tasks within this project is reported. These tasks include: development of team work plan resource allocation; identification of thermal energy source market; analysis of energy market; and planning of power plant retrofits. (LCL)

Uranium-232 buildup in a thorium/denatured uranium fueled pressurized water reactor, PWR(Th), was studied using a modified version of the spectrum-dependent zero dimensional depletion code, LEOPARD. The generic Combustion Engineering System 80 reactor design was selected as the reactor model for the calculations. Reactors fueled with either enriched natural uranium and self-generated recycled uranium or uranium from a thorium breeder and self-generated recycled uranium were considered. For enriched natural uranium, concentrations of /sup 232/U varied from about 135 ppM (/sup 232/U/U weight basis) in the zeroth generation to about 260 ppM (/sup 232/U/U weight basis) at the end of the fifth generation. For the case in which thorium breeder fuel (with its relatively high /sup 232/U concentration) was used as reactor makeup fuel, concentrations of /sup 232/U varied from 441 ppM (/sup 232/U/U weight basis) at discharge from the first generation to about 512 ppM (/sup 232/U/U weight basis) at the end of the fifth generation. Concentrations in freshly fabricated fuel for this later case were 20 to 35% higher than the discharge concentration. These concentrations are low when compared to those of other thorium fueled reactor types (HTGR and MSBR) because of the relatively high /sup 238/U concentration added to …

The feasibility analysis and evaluation of the Piqua, Ohio District Heating and Cooling Demonstration program is being conducted by the Piqua Municipal Power Co., the Piqua Law Dept., the Public Works Dept., a firm of economic analysts, and the Georgia Tech Engineering Dept. This volume contains information on the organization and composition of the demonstration team; characterization of the Piqua community; and the technical, environmental, institutional; financial, and economic assessments of the project. (LCL)

A purchaser of industrial insulation is concerned with many factors which bear on the type of insulation selected. One of the most important factors, undoubtedly, is the thermal conductivity. The thermal conductivity is a measure of the ability of an insulation to conduct heat. The lower this value the better the insulation appears to the buyer. In the past it was generally assumed that the conductivity during the life of the insulation could be taken as a fixed property so long as external influences such as moisture or physical damage do not occur. Due to the dramatic increase in the cost and availability of energy in recent years, investigation of the validity of this long-standing assumption is in order. The purpose of this study was to determine whether deterioration of industrial insulation does occur and, if so, attempt to identify the reasons. In order to accomplish this, it was necessary to first develop methods by which the conductivity could be determined in the field. Once this was accomplished, a field test program was implemented. It was determined from this program that there was a significant difference between the conductivity values obtained and those which were expected from manufacturer's data. However, …

The Argonne National Laboratories, contracted with Arthur D. Little, Inc. (ADL), to perform a 6 week goal study for the purpose of evaluating the technical applicability and the economic viability of the compound parabolic concentrator (CPC) concept for all solar energy applications except large central power plants. During this period, we studied the use of CPC units in a large number of residential, industrial, and commercial applications. The predicted performance of CPC augmented solar collectors was compared with other available solar collectors. Application of the CPC to on-site power generation using solar Rankine power generation techniques was studied in detail. Techniques and costs for fabricating CPC collectors were studied. Collectors with insulation and with full-surface reflectors were studied along with the use of CPC augmentation for evacuated receivers with selective surfaces. Manufacturing costs are compared with those reported by others. A qualitative comparison was made between the various classes of solar collectors that are either presently available or are expected to become available in the near future. Comparative energy costs for various collectors are discussed based upon the predicted performance and the estimated costs for manufacture. The problems of introducing the CPC, or other advanced technology type of solar collectors, …

The report develops an implicit solution technique to determine both the transient surface temperature and the transient surface heat flux of electrically heated rods given the power input and an ''indicated'' internal temperature during a simulated loss-of-coolant accident. A digital computer program ORINC (ORNL Inverse Code) is developed which solves a one-dimensional, transient, lumped parameter, implicit formulation of the conduction equation at each bundle thermocouple position in the Thermal-Hydraulic Test Facility (THTF).

These appendices to the mission analysis report for the Near Term Hybrid Vehicle program contain data on passenger vehicle usage by purpose, trip length, travel speed, vehicle age, vehicle ownership and fuel economy, and US demographics. (LCL)

None

The Remote Working Level Monitor (RWLM) is an instrument used to remotely monitor the RN-daughter concentrations and the Working Level (WL). It is an ac powered, microprocessor based instrument which multiplexes two independent detector units to a single central processor unit (CPU). The CPU controls the actuation of the detector units and processes and outputs the data received from these remote detector units. The remote detector units are fully automated and require no manual operation once they are set up. They detect and separate the alpha emitters of RaA and RaC' as well as detecting the beta emitters of RaB and RaC. The resultant pulses from these detected radioisotopes are transmitted to the CPU for processing. The programmed microprocessor performs the mathematical manipulations necessary to output accurate Rn-daughter concentrations and the WL. A special subroutine within the program enables the RWLM to run and output a calibration procedure on command. The data resulting from this request can then be processed in a separate program on most computers capable of BASIC programming. The calibration program results in the derivation of coefficients and beta efficiencies which provides calibrated coefficients and beta efficiencies.

This specification establishes fabrication processing requirements such as cleaning, welding, brazing, and post-weld heat treating for the modification of the Atomics International (AI) Modular Steam Generator (MSG) for use in the Large Leak Test Rig (LLTR) for the study of sodium-water reactions.

A laser light-scattering particle-size analyzer was used for a two-day period under limited field conditions to observe the occurrence and growth of particles in geothermal brines. Tests were conducted under conditions where both pH and rate of cooling to room temperature strongly influence the size and nature of the particulate population, with a low (4.5) pH and rapid quenching favoring slow growth rates. A method for estimating particulate mass in time periods shorter than 6 h from quenching is presented. Some implications for sampling and solids analysis are discussed.

The design, installation, and performance of a flue gas recuperator at a McGowan reverberatory aluminum remelt furnace are described. (TFD)

This report

The mathematical formulations of the wave propagation problem in a linear viscoelastic solid are reviewed from the point of view of constitutive equations and the theory of linear physical systems. Various general results from the theory of propagating singular surfaces and from the mathematical theory of hyperbolic equations are applied to the analysis of the wave propagation process. The impulse responses of three viscoelastic media are analyzed by use of asymptotic methods. The three material models are the standard linear solid, the standard linear solid with a continuous spectrum of relaxation times, and the power law solid. The standard linear solid with a continuous spectrum of relaxation times and the power law solid have a nearly constant quality factor, Q, over the seismic frequency band. The impulse responses of these two viscoelastic solids are compared. The results show significant and discernible features in the wave profile. It is concluded that differentiation of the models can be made by comparing wave shapes and that a complete knowledge of Q over the entire frequency range is required to determine the wave propagation problem when initiated by an impulsive process. 11 figures, 1 table.

This is an interim report on the modifications which are being made to an existing sodium loop so that a new method of removing hydrogen from sodium can be evaluated in a flowing sodium system. Some preliminary results on the performance of this type of cold trap alternative in a static sodium system are reported. Some tentative reactor design parameters for this type of getter device are presented based on the static test results. The life of such a unit is calculated to be substantially greater than that of a cold trap of equal volume.

The results of thermal analyses and impact tests on a modified design of a /sup 238/Pu-fueled general purpose heat source (GPHS) for spacecraft power supplies are presented. This work was performed to establish the safety of a heat source with pyrolytic graphite insulator shells located either inside or outside the graphite impact shell. This safety is dependent on the degree of aerodynamic heating of the heat source during reentry and on the ability of the heat source capsule to withstand impact after reentry. Analysis of wind tunnel and impact test data result in a recommended GPHS design which should meet all temperature and safety requirements. Further wind tunnel tests, drop tests, and impact tests are recommended to verify the safety of this design. (LCL)