At the request of the Office of Fusion Energy, a group of experts was convened on February 6--8, 1990. This group met to assess the world data base on Reversed Field Pinch (RFP) physics, and, further, to assess the role of the ZTH experiment in providing reactor relevant physics understanding for that confinement geometry. This group met, analyzed some of the relevant literature, and heard extensive presentations on the physics of the RFP and the plans for the ZTH and RFX devices. The conclusions of this group of experts are contained in this report.

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted in the fourth quarter of 1990. It includes the analytical data, field data, well activity data, and other documentation for this program, provides a record of the program's activities and rationale, and serves as an official document of the analytical results. The groundwater monitoring program includes the following activities: installation, maintenance, and abandonment of monitoring wells, environmental soil borings, development of the sampling and analytical schedule, collection and analyses of groundwater samples, review of analytical and other data, maintenance of the databases containing groundwater monitoring data, quality assurance (QA) evaluations of laboratory performance, and reports of results to waste-site facility custodians and to the Environmental Protection Section (EPS) of EPD.

This report consists of the testimony by J. William Currie, Manager, Energy Systems Modernization Office, Battelle, Pacific Northwest Laboratories before The Senate Committee on Governmental Affairs, Washington, DC on February 18, 1992. He states It is a pleasure to have the opportunity to talk with this distinguished committee about energy conservation technologies and policies, especially as they relate to federal energy use and the commercialization of energy-efficiency technologies. Clearly, using energy more efficiently offers the potential for tremendous cost savings and environmental benefits in the United States and throughout the rest of the world. The challenge, especially with regard to the federal sector, is to lay the foundation for ensuring that the citizens of our nation realize the maximum savings and environmental benefit over the long run. This is the primary focus of my comments today.''

Under certain assumed accidents, an SRS reactor may lose most of its bulk moderator while maintaining flow to fuel assemblies. If this occurs immediately after operation at power, components normally dependent on convective heat transfer to the moderator will heat up with the possibility of melting that component. One component at risk is the currently used cadmium safety rod. A substitute safety rod consisting solely of sintered B{sub 4}C and stainless steel has been designed which is capable of withstanding much higher temperatures. This memorandum provides the physics basis for the adequacy of the rod for reactor shutdown and provides a set of criteria for acceptance in the NTG tests. This memorandum provides physics data for other aspects of operation. These include: Heat production and helium production, along with related phenomena, resulting from inadvertent irradiation at power. Gamma heat input under drained tank conditions. An equivalent rod design suitable for charge design and safety analyses. Degradation under normal operation. Thermal flux ripple in adjacent fuel due to axial striping of alternate B{sub 4}C and steel pellets. Possible effect on safety analyses. Safety rod withdrawal during reactor startup.

The overall objectives of the full-Scale Low-NOx Cell{trademark} Burner (LNCB{trademark}) Retrofit project is to demonstrate the cost-effective reduction of NOx generated by a large, base-loaded (70% capacity factor or greater), coal-fired utility boiler. Specific objectives include: (1) At least 50% NOx reduction over standard two-nozzle cell burners, without degradation of boiler performance or life; (2) acquire and evaluate emission and boiler performance data before and after the retrofit to determine NOx reduction and impact on overall boiler performance; (3) demonstrate that the LNCB{trademark} retrofits are the most cost-effective alternative to emerging, or commercially-available NOx control technology for units equipped with cell burners. The focus of this demonstration is to determine maximum NOx reduction capabilities without adversely impacting plant performance, operation and maintenance.

The overall objectives of the full-Scale Low-NO{sub x} Cell{trademark} Burner (LNCB{trademark}) Retrofit project is to demonstrate the cost-effective reduction of NO{sub x} generated by a large, base-loaded (70% capacity factor or greater), coal-fired utility boiler. Specific objectives include: (1) At least 50% NO{sub x} reduction over standard two-nozzle cell burners, without degradation of boiler performance or life; (2) Acquire and evaluate emission and boiler performance data before and after the retrofit to determine NO{sub x} reduction and impact on overall boiler performance; (3) Demonstrate that the LNCB{trademark} retrofits are the most cost-effective alternative to emerging, or commercially- available NO{sub x} control technology for units equipped with cell burners. The focus of this demonstration is to determine maximum NO{sub x} reduction capabilities without adversely impacting plant performance, operation and maintenance. In particular, the prototype evaluations will resolve many technical issues not possible to address fully in the previous pilot-scale work and the single full-scale burner installation.

Bench-scale and pilot-scale experiments have been conducted to measure the mass transfer and kinetic rates at simulated duct injection conditions. Section 2 describes the tank reactor test results. The stirred tank reactor was used to study absorption of SO{sub 2} into saturated Ca(OH){sub 2} solutions with varied ionic strengths. The results of current experiments were compared with previous tests using saturated Ca(OH){sub 2} solution and 0.1 M CaCl{sub 2}. Section 3 summarizes the status of the Short-Time Differential Reactor (STDR) tests for Task 2.3. The effect of CO{sub 2} on reactivity of Mississippi Ca(OH){sub 2} with SO{sub 2} was investigated. The extent of carbonation was measured for a commercial Mississippi Ca(OH){sub 2} and laboratory-produced sorbents. Section 4 presents pilot plant testing conducted to evaluate various operating conditions and process schemes to support large-scale field testing at Meredosia and Beverly (Task 3). Consistent data were obtained from pilot testing of in-duct dry injection downstream of the humidifier. Section 5 reports differential reactor (Task 4) tests. The differential reactor has been modified to determine the effect of initial water content on the sorbent reactivity. An experimental method has been developed to prepare solid samples containing reproducible, predictable quantities of water. The experiments …

The following topics are discussed on the Brookhaven electron analogue: L.J. Haworth and E.L. VanHorn letters; Original G.K. Green outline for report; General description; Parameter list; Mechanical Assembly; Alignment; Degaussing; Vacuum System; Injection System; The pulsed inflector; RF System; Ferrite Cavity; Pick-up electrodes and preamplifiers; Radio Frequency power amplifier; Lens supply; Controls and Power; and RF acceleration summary.

This report summarizes the Savannah River Site (SRS) groundwater monitoring program conducted in the first quarter of 1990. It includes the analytical data, field data, well activity data, and the other documentation for this program and provides a record of the program's activities and rationale and an official document of the analytical results. The groundwater monitoring program includes the following activities: installation, maintenance, and abandonment of monitoring wells, environmental soil borings, development of the sampling and analytical schedule, collection and analyses of groundwater samples, review of the analytical data and other data, maintenance of the databases containing groundwater monitoring data and related data, quality assurance (QA) evaluations of laboratory performance, and reports of results to waste-site facility custodians and to the Environmental Protection Section (EPS) of EPD.

None

The US Department of Energy (DOE) is preparing an Environmental Impact Statement (EIS) that identifies and evaluates the environmental impacts associated with the proposed Hawaii Geothermal Project (HGP), as defined by the State of Hawaii in its 1990 proposal to Congress (DBED 1990). The location of the proposed project is shown in Figure 1.1. The EIS is being prepared pursuant to the requirements of the National Environmental Policy Act of 1969 (NEPA), as implemented by the President's Council on Environmental Quality (CEQ) regulations (40 CFR Parts 1500-1508) and the DOE NEPA Implementing Procedures (10 CFR 1021), effective May 26, 1992. The State's proposal for the four-phase HGP consists of (1) exploration and testing of the geothermal resource beneath the slopes of the active Kilauea volcano on the Island of Hawaii (Big Island), (2) demonstration of deep-water power cable technology in the Alenuihaha Channel between the Big Island and Mau, (3) verification and characterization of the geothermal resource on the Big Island, and (4) construction and operation of commercial geothermal power production facilities on the Big Island, with overland and submarine transmission of electricity from the Big Island to Oahu and possibly other islands. DOE prepared appropriate NEPA documentation for separate …

The purpose of this analysis is to design structural foundations for the Compressed Air System (CAS), and the Condensate Receiver Tank.

The purpose of the fire hazard analysis is to comprehensively assess the risk from fire within the individual fire areas. This document will only assess the fire hazard analysis within the Exploratory Studies Facility (ESF) Design Package ID, which includes the fuel storage system area of the North Portal facility, and evaluate whether the following objectives are met: 1.1.1--This analysis, performed in accordance with the requirements of this document, will satisfy the requirements for a fire hazard analysis in accordance with U.S. Department of Energy (DOE) Order 5480.7A. 1.1.2--Ensure that property damage from fire and related perils does not exceed an acceptable level. 1.1.3--Provide input to the ESF Basis For Design (BFD) Document. 1.1.4 Provide input to the facility Safety Analysis Report (SAR) (Paragraph 3.8).

The purpose of this analysis is to determine the life-cycle costs of several options relevant to the Condensate Removal System serving the Compressed Air System (CAS) at the Yucca Mountain Site Characterization Project (YMP) Exploratory Studies Facility (ESF). The best option (least present value) will be selected as the preferred configuration to construct.

The work in this task involves the use of composite membranes to remove tritium from contaminated water at DOE sites. Experience with membrane systems in industry indicates that they are inherently energy efficient. Furthermore, membrane technologies such as reverse-osmosis have been well developed for desalination and other industrial/municipal applications. Aromatic polyphosphazenes were chosen as the polymeric material for the membranes being investigated because they have excellent radiological, thermal, and chemical stability. The FY-96 effort is directed toward empirical delineation of a potential mechanism, providing a statistical approach to data acquisition, further mass balance determination, and a preliminary design for the module staged array.

The purpose of the informal test reported in this Quick Short Test Reports was to analyze Vitro Corporation's interpretation and use of the CALS standards in transferring technical publications data. Vitro used its CALS Technical Data Interchange System to produce data in accordance with the Standards and delivered it to the CTN technical staff on a 9-track magnetic tape.

Twelve weld overlay hardfacing alloys have been selected for preliminary erosion testing based on a literature review These alloys have been separated into three major groups: (1) Cobalt containing alloys, (2) Nickel-base alloys, (3) Iron base alloys. These alloys are being applied to carbon steel substrates and will undergo preliminary erosion testing to identify candidates weld overlay alloys for erosion control in CFB boilers. The candidate alloys selected from the preliminary erosion tests will then undergo more detailed evaluations in future research.

We introduce a new spatial discretization scheme for transport on arbitrary spatial grids in XY geometry. Our arbitrary'' spatial grid is composed of arbitrarily-connected polygons, each of which may have an arbitrary number of sides. We begin our derivation by imposing particle balance on every corner'' of each cell (Consequently, we call our scheme the corner-balance (CB) method.) We complete the derivation by introducing simple closure formulas that relate volume-averaged unknowns to surface-averaged unknowns in each corner. We discuss the relationship of the new scheme to discontinuous finite-element methods and to multiple-balance methods. We demonstrate that on simple grids, the method reduces to very robust schemes that have been studied previously. We discuss the theoretical performance of the method in the thick diffusion limit, and provide numerical results for that limit. We present additional numerical results from simple problems that test the new scheme in other limits. Finally, we offer some concluding remarks about the method. 9 refs., 6 figs.

The European nuclear power industry is being restructured from an industry drawn along national lines to a European-wide industry. This, in part, reflects growth of the European Economic Community, but it also reflects changes in the international nuclear power industry. The objectives of the participants, beyond better integration of the nuclear industry in Western Europe, are to (1) obtain European leadership of the worldwide commercial nuclear power industry, (2) improve medium- and long-term safety of Eastern Europe and the former Soviet Union (FSU) power reactors, and (3) reduce domestic concerns about nuclear power. The activities to achieve these goals include (1) formation of Nuclear Power International (a joint venture of the German and French nuclear power plant vendors for design and construction of nuclear power plants), (2) formation of a utility group to forge agreement throughout Europe on what the requirements are for the next generation of nuclear power plants, and (3) agreement by regulators in multiple European countries to harmonize regulations. This is to be achieved before the end of the decade. These changes would allow a single design of nuclear power plant to be built anywhere in Europe. The creation of European-wide rules (utility requirements, engineering standards, and …

This report contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for us by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 13 figs., 51 tabs.

Design studies for recombination x-ray lasers based on plasmas ionized by high intensity, short pulse optical lasers are presented. Transient lasing on n = 3 to n = 2 transitions in Lithium-like Neon allows for moderately short wavelengths ({le} 100{angstrom}) without requiring ionizing intensities associated with relativistic electron quiver energies. The electron energy distribution following the ionizing pulse affects directly the predicted gains for this resonance transition. Efficiencies of 10{sup {minus}6} or greater are found for plasma temperatures in the vicinity of 40 eV. Simulation studies of parametric heating phenomena relating to stimulated Raman and Compton scattering are presented. For electron densities less than about 2.5 {times} 10{sup 20} cm{sup {minus}3} and peak driver intensity of 2 {times} 10{sup 17} W/cm{sup 2} at 0.25 {mu}m with pulse length of 100 fsec, the amount of electron heating is found to be marginally significant. For Lithium-like Aluminum, the required relativistic ionizing intensity gives excessive electron heating and reduced efficiency, thereby rendering this scheme impractical for generating shorter wavelength lasing ({le} 50{angstrom}) in the transient case. Following the transient lasing phase, a slow hydrodynamic expansion into the surrounding cool plasma is accompanied by quasi-static gain on the n = 4 to n = …

Under the provisions of an Interagency Agreement between the US Army and the Department of Energy, Martin Marietta Energy Systems, Inc., through the Oak Ridge National Laboratory, is evaluating the Utilities and Energy Monitoring and Control System (UEMCS) installed at the US Military Community Activity at Goeppingen, Germany. This evaluation relies on examination of existing data and information to determine the effectiveness of the UEMCS. The Goeppingen UEMCS is an integral part of a combined UEMCS/district heating system which includes the UEMCS at Schwaebisch Gmuend, Germany. The system was installed during 1985 and 1986. The UEMCS at Goeppingen and Schwaebisch Gmuend are both well designed, implemented, and maintained. The UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS is operated in a supervisory mode with distributed intelligence in local controllers. At present, the UEMCS at Schwaebisch Gmuend does not have a central computer, but requires only a dedicated phone line to couple with the one at Goeppingen. Though the conversion to district heat has produced the majority of energy savings, the UEMCS day/night setback program also contributes substantially, with additional savings from start/stop programs, such as seasonal switchover, and various temperature control …

A growth algorithm has been developed to build coral shapes out of a tree of spheres. A volume density defined by the spheres is contoured to give a soft object.'' The resulting contour surfaces are rendered by ray tracing, using a generalized volume texture to produce shading and bump mapped'' normal perturbations. 16 refs., 8 figs.

A per the DOE Cooperative Agreement No. DE-FC22-91PC90550 dated March 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phase I, IIA, and IIB of the Integrated Dry NO{sub x}/SO{sub 2} Emissions Control System Project. This project includes Low NO{sub x} Burners with post firing air injection, humidification, and dry sorbent injection. This quarterly report covers the quarterly period April, May, and June, 1991. This report covers project activities for the second three months period of the project.