Abstract: "Two parallel wires close together with an arc between them form a hairpin-type of current configuration which should magnetically propel the plasma of the arc. By the time-of-flight measurements with probes it has been demonstrated that directed translational energies of 290 ev can be imparted to deuterons in a plasma produced by a high-current pulsed arc at the tips of two titanium wires loaded with deuterium. It is believed that three deuterons are actually magnetically propelled."

From purpose and scope: Diamond drill exploration of the Lukachukai district was undertaken to find minable bodies of uranium ore and to determine whether sufficient reserves were present to warrant construction of a local mill. A minimum of 30,000 feet and a maximum of 50,000 feet of drilling were assigned to block out ore in the discovery area, Mesa I (pl. 1.). It was anticipated that some of the footage might be used to test Mesa II should the area become accessible. With access to Mesas II and IV subsequently provided by roads constructed by F. A. Sitton, Inc., and access to Mesa III furnished by a road constructed by the Atomic Energy Commission, the area available for drilling was eventually increased by some three and a half times. With no increase in allotted footage, the hole density was correspondingly decreased,

Technical report with six sections describing the process: (1) The reaction of HN)3 with HSCN; (2) The distribution of nitric acid between hexone and water; (3) The distribution of HSCN between hexone and water; (4) The solubility of thorium sulfate in various extraction solutions; (5) The distribution of protoactinium and fission elements between hexone and aqueous thiocyanate solutions; and (6) Separation of uranium from thorium by extraction into hexone as UO2(SCH)a.

Historical: This process is based on experimental work done in Jackson Laboratory, Send Works, Blue Products, and East Area. It supersedes the Tentative Chambers Works Process for the Manufacture of Fluorine Using Carbon Anode Units, dated December 2, 1943.

Introduction: This is the fifth of a series of reports covering technical progress on the research and development program being performed in connection with the design of the Pathfinder Atomic Power Plant.

Theory of operation and test results are given for a resistance type of liquid metal level instrument. The voltage across a steel rod in the tank is amplified by a magnetic amplifier and indicated by a milliammeter. Temperature compensation is provided for tank temperatures up to 1000 F.

"An investigation was made into the various processes for the fixation of mixed fission products as solids in order to determine the extent they could be utilized as heat sources for thermoelectric generators. Generators of up to ten watts can be designed and built with state-of-art'' thermoelectric materials and mixed fission products soon to be available from the ldaho Falls calcination pilot plant. Mixed fission products from other processes and plants to be on stream'' in this decade will be capable of fueling practical generators into the kilowatt range using thermoelectric materials available in the same time period. A survey was made on current research and development efforts on waste fixation processes. Studies showed that a wide range of power densities (from 0.002 to 0.2 watts per cubic centimeter) will be available from calcined fission product wasted. An experimental program for the consolidation of low density, Idaho Chemical Processing Plant alumina type wastes is reviewed. Preliminary results indicated that densification factors of three to four are readily obtainable for such wastes."

The following report discusses neutron sources in reactors, discussing general conditions of the study using a flux reactor.

Abstract: "Two cases are considered. In Case I, the reactor water velocity is optimized to obtain a minimum annual cost (including amortization and operating costs) for the cooling system along. The optimum velocity for a 310 megawatt reactor is calculated to be ~25 feet per second, compared to the present design value of 30 feet per second. In Case II, the velocity which will give the minimum cost of product under the assumptions of varying power and production rate is found to be in the range from ~25 to ~40 feet per second, depending on the assumptions with respect to the variation of total investment in the reactor complex with design production capacity."

The following report follows an investigation comparing "staggered" and "spit-flow" air cooling systems.

Introduction: "The ionization region in the Nier mass spectrometer is customarily constructed of copper. Various other metals were tried for this purpose; among them tantalum and molybdenum, with both metals it was found that a spectrum of the fluoride of the metal appeared when uranium hexafluoride was admitted. It was thus possible to produce tantalum fluoride with comparative ease and to make a critical examination of the mass spectrum to set an upper limit of abundance of tantalum isotopes. For positive identification, a line must appear in all ion positions in the same abundance, relative to the main line. It must be shown that any lines which appear are not contributed by other elements or compounds."

The following report discusses a method to analyze boron in TF6, including an evaporation method for developing the boron-curcumin color and distillation of boron in TF6 samples.

Geological investigations report of the North Wash Mining distinct of the Henry Mountains in Utah.

This investigation was made to determine whether a diamond drilling program is warranted in the search for ore, and to provide basic data to guide such drilling.

A report discussing exploratory diamond drilling in the Posey and Markey localities.

"The performance of the Model I electrostatic precipitator sampler in recent field and laboratory tests is described and discussed. Two of the four precipitator-bearing balloon flights during this interval reached the floating altitude of approximates 105,000 feet, and the precipitator operated efficiently on both. One sample was collected at the nominal design flowrate of approximates 100 cfm, and the second at approximates -200 cfm. Comparison of the deposition profiles of the stratospheric samples with those obtained under controlled conditions in the altitude chamber indicates that the field samples were collected with >90% efficiency. The laboratory tests also showed that the performance capability of the precipitator improves with increasing precipitator current, and with increasing altitude. One of the above balloon flights carried two Model A-I altimeters with recorder outputs. The two records were identical within plus or minus 250 feet. In addition, variations in altitude indications were consistent with the less sensitive aneroid barocoder measurements from the same flight. A revised Model A-I altimeter with a telemeterable output signal has been designed and constructed. The frequency of the signal is a function of the altitude. A preliminary design concept for a flowmeter with negligible flow resistance is described. It would utilize …

Report regarding the chemical processing instrumentation designs and problems at the Idaho Chemical Processing Plant.

The purpose of the test was to determine the temperature and pressure coefficients of reactivity at zero power. Data was obtained during this test which indicates a new temperature coefficient and a pressure coefficient corrected to station operating conditions of 500 F and 1785 PSIG.

The purpose of the test was to determine the level of the radiation field in the Turbine Plant during a significant power run. The initial power level survey had an average radiation level of 0.02 mr/hr. this survey showed and average radiation level of 0.03, which was considered background level. this radiation level was far below the maximum allowable level of 2 mr/hyr. No Neutrons were detected.

The purpose of the test was to determine the ability of the Control Air System to provide the necessary quantity and quality of clean, dry air to keep the rod drive mechanism stator and position indicator housings at about 3 PSIG in order to avoid low stator resistances resulting from condensation during plant cooldown. The Control Air System is capable of providing the quality of air specified in AEC letter SBO:JWF:100 dated November 17, 1958 of less than 44 grains of moisture per lb. of air in the control air line nearest the reactor chamber.

The purpose of the test was to determine the operating conditions of the rod drive mechanisms so that operating personnel may be informed concerning malfunctioning mechanisms. The results the this test favorably agree with previous results. The operating characteristics of the rod drive mechanisms checked in this test have not changed appreciably.

SNAP II is the designation for a 3 KW nuclear auxiliary power unit to be used in a satellite vehicle. The SNAP II system consists of a reactor heat source, a mercury Rankine engine and an alternator. A two stage, full admission, axial flow turbine was chose for the APU application. Design details and test results are presented in this report. This work was performed under a subcontract to to Atomics International as part of the Atomic Energy Commission Contract No. AT(11-1)-GEN-8.