From abstract: "The stability of polystyrene and phenolic ion-exchange resins to radiation from a Co60 source and from absorbed Ce144-PR144 was investigated. Sulfonated polystyrene cation-exchange resins lost 10 to 20% of their capacity per watt-hour of radiation absorbed per gram of oven-dry resin, while the quaternary amine anion-exchange polystyrene resins lost about 40%. Phenolic cation-exchange resins lost only 1%."

The indicated methods for determining the following constituents of Diban, which is an aqueous solution of dibasic aluminum nitrate, Al(OH)2NO3, were evaluated statistically: 1aluminum by gravimetric, volumetric, and spectrophotometric procedures, 2. basicity (hydroxyl value) by formation of an aluminum complex and titration of the free acid with standard alkali solution, 3. total nitrogen by the Kjeldahl method, 4. ammonia by the Kjeldahl method, and 5. nitrates by means of a cation-exchange resin and titration of the liberated acid with standard alkali solution. Recommendations are made regarding the preferred methods of determining the constituents in dibasic aluminum nitrate and regarding means of minimizing errors in these analyses.

LITR Fluoride-Fuel Loop. — The inconel loop was dismantled for removal of the samples and for recovery of the uranium by using the remote cutting tools installed in a half cell of the Solid State Building. Disassembly proceeded without incident. An electric-arc cutting technique was developed for removal of the stainless steel enclosure around the pump bowl. Fission power and maximum flux were determined by irradiating a simulated loop, by heat-balance calculations, by radiochemical analyses for fission products in the fuel, by measuring the activation of cobalt foils attached to the loop, and by activation of the loop tubing itself. The determination of the power by these various methods gave 2.5 to 2.8 kw during operation of the loop, and the maximum power density was 0.4 kw/cc. Chemical analyses of the fuel were carried out to determine U, Zr, and the major constituents of inconel: Ni, Cr, and Fe.

Calculated data and graphs describing the effects of continuous thermal-neutron irradiation of thorium, the usual method of operations of homogeneous reactors, are presented.The buildup and decay of U^233, Pa^233, other heavy isotopes, and fission products are considered on the basis of best available cross-section and fission-yield data. The effects of the heavy isotopes and fission products on neutron economy are discussed.

Economic and hazards calculation of pot calcination of Purex and Thorex wastes.

Report documenting the ongoing research and developments of the Oak Ridge National Laboratory's Homogeneous Reactor Project.

Report documenting ongoing research and development undertaken by the Metallurgy Division of the Oak Ridge National Laboratory.

Report issued by the Oak Ridge National Laboratory discussing a Health Physics Instrument Manual. Descriptions, characteristics, and applications of different instruments are presented. This report includes tables, illustrations, and photographs.

The Thorex Pilot Plant at Oak Ridge National Laboratory was operated during 1955, processing reactor-irradiated thorium slugs to recover U233 and thorium and 12 MTR fuel elements to recover U235 and Np237. The radiation exposure received by operating personnel during this period averaged 60 mrcp/man-week. Most radiation exposure was received in areas that were intended to be only slightly or nonradioactive. However, because insufficient decontamination of process solutions was achieved and equipment surfaces became contaminated from equipment failures, these areas became primary sources of personnel exposure. The installation of additional shielding where needed and the prompt removal of surface contamination successfully reduced the radiation levels and exposures in these areas. Remote control of processing equipment and sampling of very radioactive solutions from process equipment was successfully accomplished, and assisted in the reduction of exposure to operating personnel.

The ORNL analog computer was used to examine one aspect of a safety system for the EGCR. The thermal behavior of the fuel as a result of increases in reactivity at various power levels and gas flows was examined. Safety actions initiated by wither a flux-minus-flow signal or a reactor outlet gas temperature signal were included in simulation.

A listing and description is given of the experiments associated with the HFIR Critical Experiment-2. The primary experiments concern the reactivity of the bare core, reactivity worth of "gray" control plates, core-power distribution, reactivity. The secondary experiments concern the reactivity of the fuel, and the reactivity worth of a "partial" gray plate.