Report discussing a model of a delta-wing configuration with four engines mounted two to a nacelle below the wing that was tested a variety of Mach numbers and Reynolds numbers. The wing static-pressure coefficients, wing pressure coefficients, and lift coefficient of different configurations are described.

Report presenting an investigation to determine the effects of forging at 1950 degrees and 2150 degrees Fahrenheit as well as the effects of several heat treatments on the performance of Inconel 550 in a turbojet engine. Differences in engine performance of the different turbine blades could not be associated with consistent differences in microstructure or grain size. Results regarding blade performance, blade elongation during engine operation, microstructure of as-heat-treated blades, grain size, metallurgical studies of failed blades, stress-rupture tests, and hardness are provided.

Engine dynamics and controls data are presented for a ram-jet engine which was operated in a free-jet facility at a Mach number of 2.76 and altitudes from 68,000 to 82,000 feet. The predominant engine dynamic characteristics was dead time, with values ranging from 0.018 to 0.053 sec. The control systems were designed to hold a constant ratio of a diffuser static pressure to an inlet-cone reference static pressure.

Report presenting an impulse-type supersonic compressor designed for turning to the axial direction that was tested in air with three different sets of stator blades at eight angle settings.

"The trajectories of waterdrops in air flowing over airfoils are determined for three airfoil - angle-of-attack combinations using the differential analyzer to solve the differential equations of motion of the waterdrops. From these trajectories the rate of water impingement, the area of impingement, and the distribution of impingement are determined as functions of two dimensionless moduli. Comparisons are made of the rate of water impingement on these airfoils and the rate of water impingement on cylinders" (p. 1).

Report discussing testing to determine the static lateral and directional stability and control characteristics of a model of the Republic F-105 airplane. The effects of various vertical tails and ventral fins, wing-tip fences, a canopy fin, fuselage nose shape, external stores, and deflection of horizontal tail, spoiler, and rudder were explored.

Report presenting an investigation at Mach numbers of 1.61 and 2.01 to determine the pressure distributions for a series of 20 controls on a 60 degree delta wing. Tests occurred at a range of angles of attack and control deflections. Results regarding basic pressure distributions, comparison of experimental and theoretical results, and experimental comparisons are provided.

Report describing an experiment to obtain heat-transfer and pressure-drop data for the air side of a liquid-metal to air, shell-and-tube heat exchanger. Testing was conducted in a 500 kilowatt facility using sodium as the shell-side heating fluid. Results regarding the shell-and-tube heat exchanger and finned-tube heat exchanger friction factor are provided.

Memorandum presenting characteristics of a hydraulic control as determined by analyzing transient data obtained with a turbojet engine operating in the altitude wind tunnel. The excellent overall performance of the speed control is attributed to the elimination of large lags in the control system, thereby permitting the use of relatively high loop gains while still maintaining satisfactory damping in transients. Some information regarding the frequency-response analysis of speed control, simulation of speed control, and acceleration control are provided.

Report presenting the lift of wing-body combinations at supersonic speeds as obtained by means of an approximate linearized-theory analysis involving an assumption concerning the geometry of the body. A comparison with several groups of data is provided to show the accuracy of the method.

Report presenting an investigation to determine the effects of simulated engine nacelles and wing-root freedoms on the flutter characteristics of a cambered, modified, swept, tapered, semispan wing through a range of Mach numbers. Wings were tested with and without nacelles and with the model restrained, free to roll, and free to translate in the vertical direction. Results regarding the effect of nacelles, flutter boundary, and effect of wing-mount freedom are provided.

Report presenting flight and analog-simulator tests with a prototype automatic interceptor in order to study the effects of elevating the radar-boresight axis on the stability and tracking performance of the system. Results regarding effects of interceptor rolling motion upon tracking errors, similarity of flight results and analog-computer results, effect of elevating the radar-boresight axis upon stability, effect of elevating the radar-boresight axis upon the required bank-angle feedback, and application of the principle of elevated radar-boresight axis are provided.

Memorandum presenting a determination of the effects on engine performance of using turbojet engines for boundary-layer control by suction at the engine inlet or by bleeding air from the compressor outlet for three current production engines. Results regarding bleed, suction, and variable-area turbine are provided.

From Summary: "The trajectories of waterdrops in air flowing over airfoils are determined for three airfoil-angle-of-attack combinations using the differential analyzer to solve the differential equations of motion of the waterdrops. From these trajectories the rate of water impingement, the area of impingement, and the distribution of impingement are determined as functions of two dimensionless moduli. Comparisons are made of the rate of water impingement on these airfoils and the rate of water impingement on cylinders."

"Icing data collected on routine operations by four DC-4-type aircraft equipped with NACA pressure-type icing-rate meters are presented as preliminary information obtained from a statistical icing data program sponsored by the NACA with the cooperation of many airline companies and the United States Air Force. The program is continuing on a much greater scale to provide large quantities of data from many air routes in the United States and overseas. Areas not covered by established air routes are also being included in the survey. The four aircraft which collected the data presented in this report were operated by United Air Lines over a transcontinental route from January through May, 1951" (p. 1).

Report discussing testing to evaluate some of the major aspects of mounting and launching missiles from the leading edge of a wing, including experimentation with six missile models at several Mach numbers. Information from flight tests and launching tests is provided.

Report presenting an investigation to determine the effectiveness of experimental control signals applied to a theoretical inlet throat Mach number control system and normal-shock-position control system for varying the inlet geometry of a twin-duct prototype aircraft. Results regarding inlet instability, control requirements, individual throat Mach number control signals, average throat Mach number control signals, theoretical thraot Mach number control analysis, effect of angle of attack, and theoretical normal-shock-position control are provided.

Report presenting testing of the transonic longitudinal characteristics of a model of the McDonnell XF3H-1 airplane. The model had a center-of-gravity location of 28.5 percent of the mean aerodynamic chord and a stabilizer setting of -5.91 degrees relative to the wing chord plane with extensible rocket racks. Results regarding Reynolds number, rocket-rack program, flight time history, trim, lift, drag, longitudinal stability, directional stability, and inlet pressure recovery are provided.

Memorandum presenting an experimental turbine designed for a high weight flow per unit frontal area, a high specific work output, a relative critical velocity ratio of 0.82 at the rotor hub inlet, and zero rotor blade suction-surface diffusion. Results regarding a comparison of overall performance of subject turbine with that of configurations I and II and comparison of rotor blade momentum thickness of subject turbine with that of configurations I and II are provided.

Experimental investigation of engine dynamics and controls for 48-inch ramjet engine in free jet facility at Mach number 2.76 and altitudes 68,000 to 82,000 feet. The engine data presented include steady-state performance, indical response, frequency response, and ignition characteristics. Ignition data are presented for representative fuel-air ratios which show that the normal shock overshoots its final position by several feet during ignition transients.

Report presenting comparisons of low-lift drag measurements on eight airplane configurations at a range of Mach numbers by various techniques. Data was obtained from wind tunnel testing, rocket propelled model tests, and airplane flight tests. The agreement of data is generally good and no consistent Reynolds number effects are observed.

Memorandum presenting an investigation of performance estimates of aircraft nuclear propulsion (ANP) systems. This paper includes a relation of current estimated ANP performance to the future requirements that nuclear propulsion systems will be required to meet.

Memorandum presenting the flow characteristics of two supersonic-impulse-turbine-blade sections designed for a turning angle of 160 degrees. Results regarding the full-contour blade, free streamline blades, and a comparison of the performance are provided.

Combined compressor coolant injection and afterburning for turbojet engine thrust augmentation.