The following report was made to determine the effective clarity improvement, flow rate characteristics, and operational problems encountered on passing Redox uranium feed solution through sintered, modified Type 304 stainless steel filter elements.

From introduction: "This is the ninth monthly report, BMI-514, under Contract No. AT(30-1)-771 on "Zirconium Research and Development". The report covers the work period from September 15, 1950, to October 15, 1950. Work is continuing on the preparation of large-diameter zirconium crystal bars in the 16-inch-diameter de Boer unit. Crystal bars up to 1-5/16 inches in diameter and 8 feet long have been prepared in this unit."

The following report discusses direct recording of nuclear pulse height data on magnetic tape that represents an inexpensive method of data storage where some degradation of the original energy resolution can be tolerated.

The following report describes a successful procedure used for the determination of americium in the presence of plutonium. Provided are articles listed that describe the research done in developing the method.

"An apparatus was designed and fabricated to obtain film samples from irradiated process slugs. This apparatus has been used to obtain film samples from slugs of the sodium dichromate elimination test."

This report follows experiments concerned with a particular proposal or set of related proposals of means for the production of plasma with density above 10-11 particles per cm-3 with a temperature of the order of a few electron volts.

Report discussing the preparation, stability, and recommended storage of cobalt trifluoride. "Cobalt trifluoride prepared by the action of fluorine upon anhydrous cobalt dichloride remains stable when kept in sealed glass tubes but on exposure to air it absorbs water and its use in the conversion of T3O8 to TF6 cannot be relied upon..."

A research program is being conducted to obtain experimental data in the irradiation of plutonium-enriched fuel to confirm a theoretical model for predicting isotopic composition and reactivity changes in plutonium-enriched, light-water-moderated reactors. Quarterly progress: The densitometry procedure (for measurement of alpha autoradiographs of fuel pellets) has been modified to eliminate the need for a second emulsion. The existence of a problem of latent image fading and non-reciprocity of the high-resolution emulsion has been recognized. A tentative procedure has been worked out to correct these emulsion difficulties. the number of polished pellets has been increased to thirteen. The number of hot spots per pellet has not changed appreciably. The largest spot seen is irregular with an estimated volume equivalent to that of a sphere of 35 mil diameter with a PuO2 concentration in the neighborhood of 60%. The VBWR irradiation run now under way is not scheduled to end until October. To the end of the last run the cumulative exposure reached 3703 MWD/T, as logged by VBWR operating personnel. Applying the same scale factor between logged exposure and Ce-Cs analysis of the first fuel sample gives a corrected exposure of 4416 MWD/T. Further debugging of EPITHERMOS, the epithermal extension of …

Work performed during the quarter is summarized by; direct measurement of fission gas pressure, loop operations, performance of UO2 fuel, UO2 grain growth and melting studies.

Conceptual design studies conducted at HAPO indicate that the improved thermal efficiencies which can be obtained in a high pressure, high temperature, nuclear-electric power plant might reduce unit power costs substantially. The Plutonium Recycle Test Reactor (PRTR) is designed primarily to investigate various facets of plutonium recycle operation. In order to increases the usefulness of the PRTR as an experimental tool, it is desirable to include facilities for testing materials and fuel concepts under a variety of conditions, including the high temperatures and pressures which may be encountered in future water-cooled power reactors.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

Summary: A prototype control rod containing absorber plates made from an electro- deposited dispersion of boron carbide in nickel was tested in the VBWR. It was exposed to the reactor environment of 545 degree F boiling water and thermal neutron fluxes (perturbed) which ranged from 0.6 to 1.1 x 10/sup 13/ nv for 2236 hours over a period of six months. The maximum B/sup 10/ burnup achieved during the test period was 1.8 percent. After irradiation, the rod was examined. The results of the examination are summarized below: (1) The B/sub 4/C-- Ni plate assembly did not undergo significant dimensional changes during irradiation. (2) Numerous blisters developed on both the outer and inner surfaces of three of the four plates. Blistering was more severe on the outer surface than on the inner, and was most severe in a large region located in the lower half of plate 4. Metallographic examination revealed that the blisters were located only in the 2- mil protective nickel overlay covering the B/sub 4/C-- Ni dispersion. It was concluded that they formed from the buildup of gas pressure at the Ni: Ni-- B/sub 4/C interfaces, rather than from corrosion attack. Helium from the B/sup 10/(n alpha …

Project Sherwood is a nation-wide attempt to produce a controlled thermo-nuclear fusion reaction. The Astron experiment, conceived by Nicholas Christofilos, will utilize the effects of a cylindrical layer of relativistic electrons to contain and heat the plasma. A high quality, 200-ampere, 5-Me V electron beam is required to form the electron layer. The electron beam is produced by a linear induction electron accelerator. Three hundred and thirty-three toroidal cores of magnetic material surround an evacuated ceramic accelerating column. The electrons are accelerated by the transverse electric field produced by the changing flux. The magnetic cores are tape-wound toroids of .001", 50% Ni - 50% Fe. Two hundred eighty-eight cores are 24" o.d. x 8-1/2" i. d. x 1/2" thick and the remaining forty-five are 33" o. d. x 18" i. d. x 1/2" thick. Each core is required to support 16 kG for 0.4 psec. The choice of magnetic material was made by testing all available material for the required parameters. Results of these tests are presented.

In the fall of 1961 an extensive program of investigation of high energy p-p interactions was begun at the Brookhaven AGS. The BNL 20" liquid hydrogen bubble chamber and an electrostatically separated beam were used to obtain a total (to date) of 300,000 exposure with about 15 antiprotons per pulse. The exposures were made at antiproton momenta of 3.25 Bev/c and 3.69 Bev/c in the laboratory. Approximately 80% of the exposures were made 3.69 Bev/c antiprotons. A wide variety of reactions occur in these collisions. Some of these such as elastic scattering, pion production, and associated production of hyperons and K-mesons have analogues in p-p collisions. The similarities and differences between the p-p and p-p results can usually be understood in a qualitative way and in some cases quantitative comparison with theory has been possible. The annihilation reactions leading to final states containing pions alone or pions with K-mesons are unique to the nucleon-antinucleon system as are the reactions in which a hyperon, anti-hyperon pair is produced. In the following, we report the principal characteristics of proton-antiproton reactions. Although the scope of this paper is comprehensive it is not a definitive report of the experiment as much of the work …

Buckling measurements at BNL have employed two experimental methods which in principle should yield identical results but in practice show a systematic and significant discrepancy. In this paper the experimental evidence of these errors is reviewed and their source is traced by means of theory to the radial flux transients which perturb the asymptotic neutron spectrum in the exponential assemblies. Some alternate and apparently more precise methods of analyzing the data are examined theoretically, including the possibility of anisotropy in the leakage probability.

Since the discovery of the Straub and Feuer as well as Laki et al. that ATP bound to G-actin is transformed to ADP and inorganic phosphate during polymerization of actin (1, 2), it has become increasingly clear that the chemical changes in the nucleotide are related to the change in the physical state of the protein. Barany, Biro, Molnar and Straub have shown that highly purified actin preparation free of any enzyme which would use ATP, ADP or AMP as a substrate still catalyze the breakdown of ATP (3) thus supporting the original idea that the ATP to ADP transformation is related to the globular to fibrous transformation of the actin protein itself. Mommaerts was the first to show that the ADP formed during polymerization remains bound to F-actin and Ulbrecht et al. while extending Mommaert's finding on exhaustively purified actin preparations have shown that the P1 formed during polymerization is not bound to F-actin. The stoichiometry of the splitting and the tightness of binding of the ADP lead inevitably to questions in regard to the position of bond breaking during the hydrolysis and to the nature of the forces involved in the tight binding of ADP to F-actin. To …

We wish to report unequivocal evidence for the water promoted, aluminum chloride induced intramolecular rearrangement of the benzene rings in diphenyl. When diphenyl 1→1,1'-C14, prepared in 80% yield via an Ullmann reaction on iodobenzene-1-C1 14, was heated to 100° for 30 min. with 10 mole % of aluminum chloride and 1 mole % of water, the radioactivity, originally localized at the two connecting carbons had been randomly distributed. Recovered active diphenyl was also shown to be randomized when the reaction was carried out for 12 hrs. in a refluxing benzene solution. The degradation method used is outlined in Fig. 1. The view that the reaction in intramolecular is supported by the following facts: (1) The inactive benzene used in the solvent experiments was devoid of activity at the end of a run within the precision of our assay methods. A rearrangement carried out with inactive diphenyl in benzene-1-C- 14 yielded diphenul having an activity indicating less than 0.001% intermolecularity.

A neutron diffraction program was initiated recently at the Puerto Rico Nuclear Center. The two double crystal spectrometers in use were assembled with the aid of staff members of the Brookhaven National Laboratory. The first research problem to be completed was a single crystal structure analysis of CaWO4. Choosing the origin at the 4(a) tungsten site in the tetragonal I41/a cell. the 16(f) oxygen parameters were found to be as follows: x=0.2413 ± 0.0005, y=0.1511 ± 0.0006, z=0.0861 ± 0.0001. Anisotropic temperature parameters were also determined for all atoms in the least squares analysis of the structure. The magnetic structure of CuSO4 has been determined in a continuation of a study started at Brookhaven in collaboration with Dr. P.J. Brown. Using the Wollan-Koehler-Bertaut notation, the antiferromagnetic spin ordering mode in the orthorhombic Pbnm cell is Ax, with the spin axis parallel to a. A moment of approximately 1 μB was found for the Cu2_ ion. The crystal structure of BaNiO2 was re-examined in a neutron powder diffraction study, and it was found that the earlier x-ray study of Lander is essentially correct. An alternative oxygen arrangement, for which x-rays would not have been very sensitive, had been suspected. BaNiO2 was …

For a wide range of statistical experiments, we require a sequence of random variables [unintelligible], which have prescribed mean values μn and variances σn2, with a given autocorrelation ρt. The [unintelligible] are to be generated as a sequence of real functions of independent random numbers [unintelligible], each of which is uniformly distributed in. The reason for this choice of specification for the [unintelligible] is that most computers have standard subroutines which generate such uniform random (or pseudo-random) sequences.

The compound KrF4 was prepared by Grosse et al. by passing an electric discharge through the elements at -196°C. Evidence for formation of KrF2 has been obtained by Pimental and Turner by UV irradiation of the elements frozen into an inert gas matrix at 20°K. Using an electron beam to irradiate krypton and fluorine at -150°C, we have prepared KrF2 in 100mg amounts and examined some of its properties.

The present communication reports the results of several investigations of magnetic structure and magnetic transitions currently in progress or recently completed at Brookhaven National Laboratory.

We have measured the rare gas isotopes in mineral concentrates of the Indarch meteorite. We obtained samples from C. Frondel, who crushed some of the meteorite into small particles mainly in the 44 to 88 micron size. He fractionated the minerals into groups according to specific gravity, using heavy liquids and magnetic techniques. The fraction with specific gravity less than 2.4 is approximately 95% tridymite and represents about 1% of the whole stone. The fraction with specific gravity between 2.4 and 2.8 contains calcium sulfide, calcium phosphate, two unidentified minerals, and tridymite and enstatite impurities. This fraction represents a few percent of the meteorite. The fraction with specific gravity between 2.8 and 3.3 consists largely of clinoenstatite and represents about 75% of the meteorite. The troilite is concentrated in the fraction with specific gravity greater than 3.3, and kamacite is concentrated in the magnetic fraction.

The crystal structure of MgSO4·4H2O has been refined using single crystal neutron diffraction data for the three main zones. The hydrogen positions which were found are essentially those which have been deduced from X-ray data in an earlier investigation.The mean value of the O-H bond lengths is 0.97Å. The O-H-O bonds are bent considerably. One hydrogen atom does not participate in hydrogen bonding, as can be concluded from the geometry of its surroundings and its thermal motion.

In high-energy particle physics the initial problem is to obtain information about the behavior of particles which are invisible by any known means (the radius of a proton is 10-13 cm) and which may be traveling at speeds greater than 180,000 miles per second, but at less than the speed of light. Some of the work is being done with the use of electronic counters, but the larger fraction is currently done by three techniques which employ the photographic process. These are the silver halide emulsion stack, the liquid hydrogen bubble chamber and the spark chamber. Counters provide immediate information but it is of a yes-or-no character, whereas the other methods are capable of actually mapping, with varying degrees of accuracy, an interaction between particles. The emulsion stack is quite familiar and need be discussed only briefly. Since individual silver halide crystals are rendered developable along the paths of charged particles, a sensitive detector may be built up with thick layers of specially sensitized emulsion having no base support. As the path of the particle may be through several emulsion having no base support. as the path of the particle may be through several emulsion layers and the track must …