Report issued by the APDA over an evaluation of the toroid sodium resistivity meter. Studies were conducted on carbon and oxygen contamination. As stated in the introduction, "the meter was also subjected to extensive testing in which variations in temperature, flow rate, and supply voltage were made in order to determine signal stability and effective range" (p. 5). This report includes tables, illustrations, and photographs.

"The St. Louis Refinery produced its first UO3 and UO2 in 1942, and its first UF4 and U metal in 1943. The accent has always been on production, and the function of the extremely small research and development groups has been to aid the production units in their job. ... Recently, there has been a growing realization of the need for a broader and more detailed knowledge of both the chemical and technological aspects of all phases of work. ... This is the first of a series of quarterly progress reports on the research and development activities at the St. Louis Refinery."--p. 6

The following report was made to determine the effective clarity improvement, flow rate characteristics, and operational problems encountered on passing Redox uranium feed solution through sintered, modified Type 304 stainless steel filter elements.

From introduction: "This is the ninth monthly report, BMI-514, under Contract No. AT(30-1)-771 on "Zirconium Research and Development". The report covers the work period from September 15, 1950, to October 15, 1950. Work is continuing on the preparation of large-diameter zirconium crystal bars in the 16-inch-diameter de Boer unit. Crystal bars up to 1-5/16 inches in diameter and 8 feet long have been prepared in this unit."

The following report discusses direct recording of nuclear pulse height data on magnetic tape that represents an inexpensive method of data storage where some degradation of the original energy resolution can be tolerated.

The following report describes a successful procedure used for the determination of americium in the presence of plutonium. Provided are articles listed that describe the research done in developing the method.

"An apparatus was designed and fabricated to obtain film samples from irradiated process slugs. This apparatus has been used to obtain film samples from slugs of the sodium dichromate elimination test."

This report follows experiments concerned with a particular proposal or set of related proposals of means for the production of plasma with density above 10-11 particles per cm-3 with a temperature of the order of a few electron volts.

Abstract: Uranium associated with peat humus was discovered in a boggy meadow in the Sierra Nevada of Kern County, California, in the fall of 1955.

The design of a waste-gas treatment system for organic moderated reactors requires a knowledge of reactor waste-gas composition, generation rate, and radioactivity. To obtain data on these variables a continuous stream analyzer was constructed to analyze the waste gas from the Organic Moderated Reactor Experiment (OMRE).

Abstract: Design charts and systematic design forms are presented for simplified calculations to check the number of convolutions and thickness required to limit the deflection and pressure stress range in three types of bellows.

Abstract: An investigation of the metallurgical aspects of the SRE fuel element episode, that occurred July 26, 1959, has been completed.

Experiments were carried out to (1) explore possibilities for developing a less expensive device than the Hurst threshold detector unit (TDU) for monitoring possible accidental critical reactions in uranium-processing facilities, (2) to study the precision and accuracy of the TDU, and (3) to evaluate the ORNL film badge in mixed neutron-gama radiation fields.

Abstract: The experimental application of centrifugal clarification, precoat filtration, conventional filtration, and adsorption to the removal of impurities from a bypass stream of irradiated reactor coolant at the Organic Moderated Reactor Experiment is described and evaluated.

Abstract: The nature of the high boiling radiolysis products of OMRE coolants was studied extensively.

Abstract: In fulfillment of the general objective of developing information on two-phase flow required in the safety evaluation of sodium cooled reactors, pool and forced-convection boiling of sodium were studied both experimentally and analytically.

From introduction: This report contains D2O spectral investigations, measurements of scattering angular distributions, BeO spectral measurements, studies of space dependent problems, theoretical studies, and preliminary studies of fast neutron shielding.

Report presenting two-dimensional aerodynamic lift and moment flutter derivatives for moderate and high angles of attack for several airfoil profiles varying in thickness and thickness distribution. The results indicate that the variables angle of attack, airfoil profile, reduced frequency, and Mach number all have significant interdependent effects.

Report presenting an investigation of the effect of reducing the static stability by a practical center-of-gravity shift in swept-wing airplanes of low aspect ratio with no horizontal tail. Results regarding relocating the center of gravity, the effect of lift due to elevator deflection, the effect of increased total elevator effectiveness, and the effect of response characteristics over long time periods are provided.

"Stewartson's transformation is applied to the laminar compressible boundary-layer equations and the requirement of similarity is introduced, resulting in a set of ordinary nonlinear differential equations previously quoted by Stewartson, but unsolved. The requirements of the system are Prandtl number of 1.0, linear viscosity-temperature relation across the boundary layer, an isothermal surface, and the particular distributions of free-stream velocity consistent with similar solutions. This system admits axial pressure gradients of arbitrary magnitude, heat flux normal to the surface, and arbitrary Mach numbers" (p. 1).

Report presenting an investigation of the release characteristics of dynamically scaled stores carried internally in a simulated bomb bay at Mach numbers of 1.39 and 1.98. A model of the Republic F-105 half-fuselage and bomb-bay configuration was tested with four store shapes: the MK-7 store, the bluff store, the TX-28 store, and turnabout TX-28 store. Results regarding ejection photographs and data plots are also provided.

Pressure recovery in adjustable supersonic inlet combined with J34 turbojet engine up to Mach 2.0.

The effectiveness of molybdenum disulfide MoS2 as a bearing lubricant was determined at high temperature and at high speeds. A 1-inch-bore ball bearing operated at temperatures to 1000 F, a speed of 1725 rpm, and a thrust load of 20 pounds when lubricated only with MoS2-air mist. A 75-millimeter-bore cageless roller bearing, provided with a MoS2-syrup coating before operation, operated at DN values to 1 x 10(exp 6) with a load of 368 pounds.

Report discussing the drag and pressure recovery of a model with a nose inlet with a parabolic arc at zero angle of attack. External drag coefficient and total-pressure recovery at the end of the diffuser were measured at a range of Mach numbers and mass-flow ratios.