Report presenting an investigation in the pressure wind tunnel to determine the effect of an operating propeller on the aerodynamic characteristics of a model of a vertical-rising airplane with an unswept wing with an aspect ratio of 3. Lift, longitudinal force, pitch, and roll characteristics, with and without power, are presented for the complete model and various combinations of model components.

Report presenting an investigation to determine the longitudinal stability, lift, and drag characteristics of a rocket-powered model of a canard configuration with a 45 degree sweptback wing of aspect ratio 6.0, taper ratio of 0.6, and NACA 65A009 airfoil section. The variations with Mach number of lift, drag, and longitudinal stability were compared with a tailless and a conventional model with the same wing.

"For each of two inlet-boundary-layer thicknesses, performance and boundary-layer characteristics have been determined for a 12 degree, 10-inch-inlet-diameter diffuser, a 12 degree, 21-inch-inlet-diameter diffuser, and a 23 degree, 21-inch-inlet-diameter diffuser. The investigation covered an inlet Mach number range from about 0.10 to coking. The corresponding inlet Reynolds number, based on inlet diameter, varied from about 0.5 x 10(6) to 7.5 x 10(6)" (p. 1013).

Report presenting an investigation of the effects of leading-edge camber without twist on an aspect-ratio-3 delta wing of thickness ratio 3, a body with an ogive nose, and a cylindrical afterbody. Results regarding the base pressures and body characteristics and wing-body combinations are provided.

Report presenting experimental results showing the static longitudinal-stability and -control characteristics of a model of a fighter airplane with a low-aspect-ratio unswept wing and an all-movable horizontal tail. The investigation was made over a Mach number range from 0.60 to 0.90 and from 1.35 to 1.90. Results regarding the pitching moment at zero lift, longitudinal stability, and longitudinal control are provided.

Report presenting an investigation of the effect of reducing the static stability by a practical center-of-gravity shift in swept-wing airplanes of low aspect ratio with no horizontal tail. Results regarding relocating the center of gravity, the effect of lift due to elevator deflection, the effect of increased total elevator effectiveness, and the effect of response characteristics over long time periods are provided.

Report presenting two-dimensional aerodynamic lift and moment flutter derivatives for moderate and high angles of attack for several airfoil profiles varying in thickness and thickness distribution. The results indicate that the variables angle of attack, airfoil profile, reduced frequency, and Mach number all have significant interdependent effects.

Pressure recovery in adjustable supersonic inlet combined with J34 turbojet engine up to Mach 2.0.

Report presenting an investigation of an annular nose inlet equipped with a remotely controlled translating spike and variable bypass in the supersonic wind tunnel. The inlet performance was explored with the airflow controlled by an operating J34 engine and with the engine simulated by a choked plug. Results regarding the performance of the inlet, corrective action that should be applied to avoid pulsing, performance of the subsonic portion of the diffuser, supersonic performance, radial-flow profiles, and other flow profiles are provided.

"Stewartson's transformation is applied to the laminar compressible boundary-layer equations and the requirement of similarity is introduced, resulting in a set of ordinary nonlinear differential equations previously quoted by Stewartson, but unsolved. The requirements of the system are Prandtl number of 1.0, linear viscosity-temperature relation across the boundary layer, an isothermal surface, and the particular distributions of free-stream velocity consistent with similar solutions. This system admits axial pressure gradients of arbitrary magnitude, heat flux normal to the surface, and arbitrary Mach numbers" (p. 1).

Report presenting an evaluation of the sea-level static equilibrium performance of an early developmental two-spool turbojet engine and its components and a comparison with a hypothetical two-spool turbojet engine. Results regarding the equilibrium performance of the actual engine, including its compressor performance, turbine performance, component operation, and engine performance and a comparison of those categories with the hypothetical engine are provided.

Report presenting the airplane drag problem at transonic and supersonic speeds. The area rule is shown to be a powerful tool that provides guidance for designers in selecting aerodynamic features compatible with low wave drag. Analytical methods have been developed that permit quantitative evaluation of the wave-drag level likely to be experienced with a given design.

From Summary: "The effect on drag of positioning symmetrically mounted Douglas Aircraft Company, Inc. stores in pairs on a parabolic fuselage of fineness ratio 10.0 has been determined by flight tests of rocket-propelled, zero-lift models through a range of Mach number from 0.9 to 1.8. The stores were mounted in half-submerged positions and on pylons and were tested in three longitudinal locations on the fuselage with the forward position being located at the maximum diameter of the fuselage. The effects on drag of removing the half-submerged stores or extending them outward on pylons also was investigated by tests of models with half-submerged-store cavities on the fuselage. Two pylons differing in airfoil section and thickness were tested at the forward position of the stores on the fuselage with cavities."

From Summary: "Exact solution of the laminar-boundary-layer equations for wedge-type flow with constant property values are presented for transpiration-cooled surfaces with variable wall temperatures. The difference between wall and stream temperature is assumed proportional to a power of the distance from the leading edge. Solutions are given for a Prandtl number of 0.7 and ranges of pressure-gradient, cooling-air-flow, and wall-temperature-gradient parameters. Boundary-layer profiles, dimensionless boundary-layer thicknesses, and convective heat-transfer coefficients are given in both tabular and graphical form. Corresponding results for constant wall temperature and for impermeable surfaces are included for comparison purposes."

Report presenting a flight investigation to determine the effect that inclination of the principal axis of inertia as produced by varying the wing incidence angle has on dynamic lateral stability of the Republic XF-91 airplane. Results indicated that the wing incidence angle had a negligible effect on the period of lateral oscillation.

Report presenting testing of six 1-series axisymmetrical nose air inlets of 8-inch maximum diameter at zero forward velocity in the 8-foot transonic tunnel. Total-pressure surveys, pressure-recovery measurements, and flow-visualization studies were made through a range of mass-flow ratio from below the normal operating range to choking. Results indicate that the performance characteristics of the inlets with differing amounts of roundness varied widely.

Report discussing testing of two models of the Chance Vought Regulus II missile to determine its drag characteristics for a range of Mach numbers. The measured total-drag-coefficient data was extrapolated to external-drag-coefficient data and presented.

Report presenting an investigation to determine the high altitude performance of the J57-P-1 turbojet engine and components conducted at the NACA Lewis altitude wind tunnel. Four conditions were tested: engine operation with both the compressor bleed ports closed, with the large compressor bleed port open, with both compressor bleed ports open, and normal engine operation with the automatic control.

Report presenting tests conducted on models with 45 degree sweptback wings with varying degrees of flexibility to determine the effective lift-curve slopes in order to evaluate the usefulness of a general method for predicting effective lift ratio by a comparison of predicted values with test results.

Report presenting the initial development of a technique for the qualitative study of the stability and control characteristics of a free, self-propelled, dynamic submarine model. Two types of control systems were evaluated. Results regarding the qualitative analysis of the control system, dive paths, equations of motion, and comparison with experimental paths are provided.

Report presenting the initial development of a technique for the qualitative study of the stability and control characteristics of a free, self-propelled dynamic submarine model in Langley tank no. 1. Two types of control systems were evaluated, but only one provided satisfactory results at the desired test speeds. Results regarding the qualitative analysis of the control systems, dive paths, equations of motion, and comparison with experimental paths are provided.

Report presenting testing of a configuration with a body of fineness ratio 16.6, an unswept horizontal tail of aspect ratio 2.7, and a highly swept vertical tail, which were aeropulsed continuously in pitch during free flight with and without a sustainer rocket motor operating. Results regarding the pitching response, cross coupling, sustainer motor, angle of attack at zero normal force and tail flip, model aerodynamic center, induced jet effect are provided.

Report presenting an investigation with the objective of eliminating destabilizing changes of pitching moment through the use of wing modifications for two airplane models with triangular wings of aspect ratio 2 and 3. Models were tested with horizontal tails above the extended wing chord plane and with the tail off.

From Introduction: "The purpose of this report is (1) to describe the performance of each component over a range of altitudes, (2) to show the effect of flight conditions on operating point of each component, and (3) to summarize briefly the effects of changes in component performance with flight condition on the over-all engine performance."