The following documents are progress reports that follow chemical research studies in subjects such as ruthenium tetroxile distillations, extraction-scrub studies of zirconium and niobium, and oxidation of plutonium and stabilization of plutonium(VI) during extraction of IAF solutions.

Report describing how the neutralized aqueous waste from the TBP Metal Recovery Process will be concentrated by evaporation to minimize the requirements for underground storage tank capacity.

The determination of various parameters such as thermal utilization, resonance escape probability, control rod calibrations and etc. is often accomplished by the measurement of the pile period due to some given perturbation. With the present thoughts being directed towards plutonium fueled reactors, it was felt worthwhile to discuss a few of the basic differences in pile neutron behavior due to the smaller fraction of delayed neutrons per fission of Pu239 and the larger fraction of delayed neutrons per fast fission of U238 than occurs from fission of U235 alone.

In answer to the question, "How well do we know the composition of the fuel material for the PRTR start-up tests?", the analytical data on the PRTR fuel elements and other fuel elements which were fabricated by similar processes was gathered and analyzed. The results of this analysis are presented.

Graphs for estimation of plutonium and trans-plutonium isotopic content of irradiated plutonium reactor fuel of various initial isotopic compositions.

The study of the flame photometric method for determining the concentration of tributylphosphate (TBP) in a hydrocarbon diluent was undertaken because it showed promise of being economically competitive and subject to fewer interferences than the existing methods. The determination of TBP in the hydrocarbon solutions throughout the range 0.01 to 80 per cent TBP may be performed using the flame photometer. The principal conclusions resulting from the study found a that there was higher precision in the one to two percent TBP rang than the 45 per cent TBP level due to error in reproducing narrow slit width in the higher range, 2) nitric acid, uranyl nitrate, and thorium nitrate all interfere if present but can be eliminated by contacting the solution with water or sodium carbonate solution. 3) a single determination may be made in 15 minutes, multiple determinations can be made at a rate of one to two minutes per determination, and 4) a modification of an existing method makes possible the application of this method to the determination of TBP dissolved in aqueous samples. A relative precision of plus of minus five per cent (95 per cent confidence level) is obtained.

Report from Hanford Laboratories concerning "the design and construction of the 100-N Reactor and heat dissipation plant complete with the necessary auxiliaries" (p. 2). Details of its construction and the plant's systems and instrumentation are described as well as economic considerations.

The following report observes infrared measurements in the region of OH bands, the C2O band vicinity, the low frequency end of the spectrum, and the region of the UO2 band on the system hexone - water - uranyl nitrate.

The fabrication processes applied to nuclear fuels are subject to severe limitations because of the conditions imposed by the reactor environment. The combined problems of neutrons fluxes, high heat fluxes, corrosion by the coolant , and embrittlement by hydriding or similar reactions may be minimized through establishing rigorous materials and fabrication specifications for fuel and cladding.

The following report describes the process to determine the method for determination of americium in the presence of plutonium and uranium.

A new type of flexible hose connector consisting of a Teflon tube enclosed in a stainless steel wire braid sheath was proposed for use on 105-C rear face in late 1954. A test was initiated to determine the suitability of Teflon, and specifically Fluoroflex Teflon compound for rear face application. Probable useful life limit is estimated at 10⁶ R, which would be attained in about three years in contact with fresh effluent.

The following report was made to determine the effective clarity improvement, flow rate characteristics, and operational problems encountered on passing Redox uranium feed solution through sintered, modified Type 304 stainless steel filter elements.

For many years effort has been directed toward the development of means for the practical utilization of the heat evolved from the radioactive decay of certain fission and irradiation products. Fission products, in view of their availability in the plentiful, high-level wastes resulting from the processing of irradiated, nuclear reactor fuels have been most intensively studied for applications where their heat of decay might be converted into useful energy such as electricity for the operations of certain devices in place of chemical batteries . In addition other materials having desired radioactive properties may be produced by neutron bombardment of readily available elements.

The construction and operation of a fission gas generator, containing about 25 grams of uranium in the form of a powder with a high specific surface, are described in detail. The purpose of the work discussed in this report was to examine the feasibility of producing, separating, and assaying samples of Xe135 in preparation for a proposed measurement of the neutron cross section of this isotope. Krypton and xenon are separated by selective adsorption on charcoal at reduced temperature while iodine is removed by charcoal sorption at room temperature.

One of the primary reasons for operating the high pressure KER loops is to obtain information concerning water quality control characteristics for recirculating water cooled reactors. The KER-1 loop is predominantly carbon steel and approximates the water quality conditions specified for the New Production Reactor (NPR).

A series of tests conducted in an attempt to reduce the observed O2 content of primary recirculation loop water to a value of <0.14ppm by the current loop method which is a combination of pressurizer degasification and venting flow.

The purpose of this report is to present a HAPO proposal for the design and construction of a high-temperature, high-pressure light water recirculation test facility for the Westinghouse Electric Corporation, Atomic Power Division This report does not attempt to justify the feasibility of site location nor does it attempt to elaborate on such technical considerations as permissible test specimen heat generation and enrichment requirements which have been covered in an earlier document. Instead, detail information is developed on the proposed design with major emphasis on detail descriptions of the proposed loop and auxiliaries, design and construction scheduling and costs, and operating costs.

In the fall of 1952, a pilot plant batch dissolution study was carried out to obtain the data required for the design of the Purex Plant dissolvers. Particular emphasis was placed on the rate of dissolution and the efficiency of nitrogen oxide recovery from the dissolver off-gas. The results are presented in this report.

Investigation of principles of pulse-column design and effects of operating variables.

An electromagnetic eddy current instrument is described that is capable of measuring copper and nickel plating 1 to 8 mils thick plated on bismuth mandrils of various sizes and shapes.

The ambient temperature of the Columbia River is of interest to the Aquatic Biology Operation since it provides a basis for controlling the temperatures in various experimental tanks which contain Columbia River organisms and since it provides some indication of whether conditions are favorable for the valuable species of fish living in the river. Since the start-up of the plant, temperatures of the river water have been taken in the several water treatment plants.

The PRTR pressure loop is an experimental facility to be installed in the Plutonium Recycle Test Reactor, Building 309, for use in testing the feasibility of reactor cooling systems utilizing high pressure water or steam as the coolant. It will furnish operating experience with such systems and serve to test fuel elements and components designed to operate in such environments.

A plutonium solution of known Pu-241 content was purified by solvent extraction techniques to remove uranium and americium impurities. Portions of this purified solution were then analyzed for U-237 as a function of time. Since the growth of U-237 occurs directly by the alpha decay of Pu-241, these measurements provided sufficient data for calculation of the Pu-241 alpha half-life, which was found to be 2.91 ± 0.50 x 10⁵ years.

As recommended in a previous report a study of the NO₂ and HNO₃ exposures of plant personnel in the 224 U Building has been made. Concentrations of NO₂ and HNO₃ from the 224 U roof stack, in the concentrator cells, and in the calcining pot rooms have been determined. The problems have been outlined and recommendations have been made for its alleviation.