Technical report describing the results of the chemical reaction between potassium amide and liquid ammonia and the exchange of hydrogen between hydrogen gas and liquid ammonia. This report finds that the reactions may be sufficiently rapid to be useful for isotope separations on a larger scale.

Abstract: "Vanadium-uranium equilibrium studies were made on alloys prepared from high-purity vanadium and good biscuit uranium. No intermetallic phases occur in the system. Additions of vanadium lover the uranium melting point and transformations producing a eutectic at 1240 +/- 5 C and eutectoid reactions at 727 +/- 5 and 652 +/- 5 C. The maximum solubility of uranium in vanadium is about 4 atomic per cent (15 weight per cent)."

A report about metallurgy, chemistry, and physics of metals and alloys. Particular metals include zirconium, thorium, and vanadium metal as well as other earth metals.

The following document analyzes plutonium in urine which uses nuclear track film for evaluation of the quantity of separated plutonium.

None

The relative physiological and toxicological properties of americium and plutonium have been studied following their intravenous administration to rats. The urinary and fecal excretion of americium was similar to that of plutonium administered as Pu(N0{sub 3}){sub 4}. The deposition of americium the tissues and organs of the rat was also similar to that observed for plutonium. The liver and the skeleton were the major sites of deposition. Zirconium citrate administered 15 minutes after injection of americium increased the urinary excretion of americium and decreased the amount found in the liver and the skeleton at 4 and 16 days. LD{sub 30}{sup 50} studies showed americium was slightly less toxic when given in the acute toxic range than was plutonium. The difference was, however, too slight to be important in establishing a larger tolerance does for americium. Survival studies, hematological observations, bone marrow observations, comparison of tumor incidence and the incidence of skeletal abnormalities indicated that americium and plutonium have essentially the same chronic toxicity when given on an equal {mu}c. basis. These studies support the conclusion that the tolerance values for americium should be essentially the same as those for Plutonium.

The relative physiological and toxicological properties of americium and plutonium have been studied following their intravenous administration to rats. The urinary and fecal excretion of americium was similar to that of plutonium administered as Pu(N03)4. The deposition of americium the tissues and organs of the rat was also similar to that observed for plutonium. The liver and the skeleton were the major sites of deposition. Zirconium citrate administered 15 minutes after injection of americium increased the urinary excretion of americium and decreased the amount found in the liver and the skeleton at 4 and 16 days. LD305° studies showed americium was slightly less toxic when given in the acute toxic range than was plutonium. The difference was, however, too slight to be important in establishing a larger tolerance dose for americium. Survival studies, hematological observations, bone marrow observations, comparison of tumor incidence and incidences of skeletal abnormalities indicated that americium and plutonium have essentially the same chronic toxicity when given on an equal basis. These studies support the conclusion that the tolerance values for americium should be essentially the same as those for plutonium.

Report discussing the drag and pressure recovery of a model with a nose inlet with a parabolic arc at zero angle of attack. External drag coefficient and total-pressure recovery at the end of the diffuser were measured at a range of Mach numbers and mass-flow ratios.

The effectiveness of molybdenum disulfide MoS2 as a bearing lubricant was determined at high temperature and at high speeds. A 1-inch-bore ball bearing operated at temperatures to 1000 F, a speed of 1725 rpm, and a thrust load of 20 pounds when lubricated only with MoS2-air mist. A 75-millimeter-bore cageless roller bearing, provided with a MoS2-syrup coating before operation, operated at DN values to 1 x 10(exp 6) with a load of 368 pounds.

None

None

None

None

Bismuth analytical methods were investigated for the purpose of selecting procedures which are satisfactory for the analysis of solutions containing plutonium and bismuth. The gravimetric procedure which is recommended for samples containing these two elements includes removal of the plutonium by peroxide precipitation, separation of the bismuth by precipitation with sodium carbonate, and final ignition of the bismuth as a phosphate. Necessary equipment and experimental technique are described. In the analysis of eight known samples by the recommended method, the average recovery of bismuth was 99.76 percent, with a standard deviation of 0.22 percent. The known samples contained about 35 mg of bismuth and 25 mg of plutonium. For similar samples in routine work, the confidence limits at the 95 percent level for the average of triplicated determinations are +- 0.30 percent of the bismuth in the the sample. Other methods investigated and having possible application for some Pu-Bi analysis problems include electrodeposition of bismuth on a mercury cathode and gravimetric analysis with BiCr(CNS)6 as the weighed product.

Determination of cadmium in plutonium-cadmium solutions was successfully accomplished by separating the plutonium as an insoluble peroxide, evaporating the solution containing the cadmium, and weighing the latter as a sulfate. with 5 t0 20 mg of cadmium and similar amounts of plutonium, the 95% confidence limits for the average of triplicate determinations was to be +- 0.3 percent of the cadmium in the sample. When samples contained as little as 5 mg of cadmium, it was necessary to correct the weight of cadmium sulfate with a carefully determined reagent blank which originated mainly from the action of hydrogen peroxide on glass containers.

None

Report issued by the Brookhaven National Laboratory discussing progress of waste concentration studies. As stated in the introduction, "the present report covers all experimental hot runs up to the time the still was turned over to the Waste Control Section for intermediate handling of laboratory D waste" (p. 1). This report includes tables, illustrations, and photographs.

Report summarizing work done by the Ames Laboratory from April, 1951 through June, 1951 in the fields of metallurgy, chemistry, physics, and engineering.

Exponential rise times, T, of neutron flux in an Oy-Tu assembly have been measured for a set of points essentially equally spaced reactivity-wise in the interval between delayed and prompt critical corresponding to [infinity] > T > 5 seconds. The relationship between positive period and reactivity thus obtained is used to decide (preferentially) between two currently used but divergent collections of delayed neutron data, specifically with respect to the relative abundances of delayed neutrons in the different decay periods. Results of other reactivity measurements supplementing the positive period data are also given.

From introduction: "The prime motive behind the experiments described in this report and in those preceding it in this series is the desire to reduce the number of Redox cycles necessary for decontamination from fission products of the plutonium and uranium streams sufficient to allow final disposition of these two products...This report deals with the mechanics of manganese dioxide handing, laboratory development of manganese dioxide scavenging, and a series of experiments at multicurie level combining ruthenium volatilization and manganese dioxide scavenging in stainless steel equipment."

Report presenting pressure distributions, wake measurements, and tuft patterns for wings with 30 and 45 degrees of sweepback in conjunction with a midwing fuselage at Mach numbers to 0.96. The wings have an NACA 65-210 section, a taper ratio of 2.6:1, and aspect ratios of 7.5 and 5.2. The study indicated that when the Mach number reached high subsonic values at low angles of attack, the locations of peak negative pressure coefficients on the upper surfaces of the sections near the wing-fuselage junctures shifted rearward.

Report presenting pressure distributions and wake measurements for wings with 30 and 45 degrees of sweepforward, in conjunction with a midwing fuselage, at Mach numbers up to 0.96. The wings had an NACA 65-210 section, a taper ratio of 0.38, and aspect ratios of 7.5 and 5.2. Results regarding pressure distributions, wake measurements, and corrections are provided.

Tests were conducted on a laboratory and semi-plant scale to determine the effect of permitting scrap grossly contaminated with uranium to be used in steel manufacture. It was found the most of the uranium is removed with the slag. Steel made with this scrap would have a uranium constituent so little above that made with uncontaminated scrap as to be hardly significant. The slag itself would not present any hazard in handling or normal use. It is recommended, therefore, that in the future steel with only surface uranium contamination be released through normal scrap channels.

Report evaluating different methods of preparing nitric acid solution and different methods of separating plutonium from this nitric acid solution of slag and crucible. Methods are explained and experimental data is given.