Production Test 313-105-13-M authorized the irradiation of a uranium - 0.4 atomic per cent chromium alloy to determine the relative stability of this material during irradiation. Five tubes, each containing six four-inch alloy slugs, were irradiated to exposures ranging from 156 to 834 MWD/T. This report describes the results of the visual examination of the bare uranium alloy slugs and the results of the test to determine slug breaking strength. The breaking strength of both the U-Cr alloy slugs and the normal uranium control slugs was reduced by exposure in the pile. The breaking strength of those U-Cr alloy pieces not cracked or broken in the jackets before examination was consistently greater than the breaking strength of the normal uranium at all exposures.

A two-group approximation of the fission ratios and Pu production in an infinite hollow matrix is developed

Quarterly technical report including reports on chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation of the Chemistry Division of the Oak Ridge National Laboratory (ORNL). [From Abstract]

Abstract. Some idealized calculations (CP-807) relating to the design of heat exchangers for minimum holdup of pile liquid are presented in compact form to facilitate quick estimates. Their use is illustrated by application to a falling film type exchanger.

With discussion under way concerning power production by chain reacting piles, it becomes pertinent to consider the ration of the temperature of the hottest spot in the pile to the average exit temperature of the cooling stream. This is important because the temperature of the hottest spot in the pile is one of the limiting factors in determining the maximum power at which a pile can be operated. However, the higher the temperature of the emerging cooling stream, the more efficient can be the thermal engine operated by it. Thus the ideal situation is to have the average exit temperature of the cooling stream as near as possible to the hottest temperature of the hottest spot in the pile.

The general solution to the basic differential equation d^4w/dy^4 +4w= -4f(y) is transformed from the primary form treated in most texts to an alternate form in which each integration constant corresponds to one edge condition at y=0. The relationships between the integration constants of the two forms are derived and the values for the transformed functions are tabulated. The particular solution is derived in general and given in unique form for various functional forms of f(y). Matrix notation is used throughout the derivations; however, a knowledge of matrix theory is not need for application of the results.

Equilibrium krypton and xenon adsorption isotherms were obtained for four varieties of charcoal and for Linde Molecular Sieves Types 4A and 5A, generally at 0, 25, and 60°c. Such data are of interest in connection with design and evaluation of adsorbers for radioactive noble gas fission products. The isotherms were fitted, by linear regression analysis, to straight-line forms of the Freundlich and Langmuir equations. The Freundlich linear equation gave the better fit and the parameters of this equation are presented for each of the isotherms. Also presented are the constants for an equation representing the temperature dependence of arbitrary adsorption coefficients, the coefficients having been calculated from the Freundlich isotherm parameters. Some aspects of the applicability and accuracy of these results are discussed.