The cylindrical thruster differs significantly in its underlying physical mechanisms from the conventional annular Hall thruster. It features high ionization efficiency, quiet operation, ion acceleration in a large volume-to-surface ratio channel, and performance comparable with the state-of-the-art conventional Hall thrusters. Very significant plume narrowing, accompanied by the increase of the energetic ion fraction and improvement of ion focusing, led to 50%–60% increase of the thruster anode efficiency. These improvements were achieved by overrunning the discharge current in the magnetized thruster plasma.

Revision 0A of this document contains new Appendices C and D. Appendix C contains a re-analysis of the rigid and flexible tanks at the 460 in. liquid level and was motivated by recommendations from a Project Review held on March 20-21, 2006 (Rinker et al Appendix E of RPP-RPT-28968 Rev 1). Appendix D contains the benchmark solutions in support of the analyses in Appendix C.

The NSTX GDC system has been improved by replacing one of the two fixed anodes with a Movable GDC Probe (MGP) anode that can be inserted 1.2 m to about midway between the inner and outer vessel walls. The purpose was to provide more spatially uniform HeGDC for improving discharge stability and reliability. The MGP has been used reliably between every discharge during the last two NSTX experimental campaigns. It has also been used to apply HeGDC assisted boronization, and more recently, HeGDC assisted lithiumization. The MGP has contributed to improved NSTX performance during long pulse and H-mode discharges, and enabled a faster discharge repetition rate.

We predict the upper bound on the dissociation temperatures of different quarkonium states.

Individual raw data streams from instrumentation at the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF) fixed and mobile sites are collected and sent to the Data Management Facility (DMF) at Pacific Northwest National Laboratory (PNNL) for processing in near real time. Raw and processed data are then sent daily to the ACRF Archive, where they are made available to users. For each instrument, we calculate the ratio of the actual number of data records received daily at the Archive to the expected number of data records. The results are tabulated by (1) individual data stream, site, and month for the current year and (2) site and fiscal year dating back to 1998. Table 1 shows the accumulated maximum operation time (planned uptime), the actual hours of operation, and the variance (unplanned downtime) for the period October 1 through December 31, 2006, for the fixed and mobile sites. Although the AMF is currently up and running in Niamey, Niger, Africa, the AMF statistics are reported separately and not included in the aggregate average with the fixed sites. The first quarter comprises a total of 2,208 hours. For all fixed sites, the actual data availability (and therefore actual hours of …

None

None

Parton showers are widely used to generate fully exclusive final states needed to compare theoretical models to experimental observations. While, in general, parton showers give a good description of the experimental data, the precise functional form of the probability distribution underlying the event generation is generally not known. The reason is that realistic parton showers are required to conserve four-momentum at each vertex. In this paper we investigate in detail how four-momentum conservation is enforced in a standard parton shower and why this destroysthe analytic control of the probability distribution. We show how to modify a parton shower algorithm such that it conserves four-momentum at each vertex, but for which the full analytic form of the probability distribution is known. We then comment how this analytic control can be used to match matrix element calculations with parton showers, and to estimate effects of power corrections and other uncertainties in parton showers.

The {tau}{sup -} {yields} {pi}{sup -}{pi}{sup +}{pi}{sup -}{nu}{sub {tau}} and {tau}{sup -} {yields} {pi}{sup -}{pi}{sup -}{pi}{sup +}{eta}{nu}{sub {tau}} decays have been studied with the BABAR detector. Preliminary branching fractions on the two modes are presented. The {tau}{sup -} {yields} {pi}{sup -}{pi}{sup -}{pi}{sup +}{eta}{nu}{sub {tau}} mode is found to have a large contribution from the {tau}{sup -} {yields} {omega}{pi}{sup -}{nu}{sub {tau}} decay. The {tau}{sup -} {yields} {pi}{sup -}{pi}{sup -}{pi}{sup +}{eta}{nu}{sub {tau}} decay is studied using the {eta} {yields} {gamma}{gamma} mode and the {tau}{sup -} f{sub 1}(1285){pi}{sup -}{nu}{sub {tau}} decay is seen to be the primary source of these decays. A 90% confidence level upper limit is placed on the {tau}{sup -} {yields} {eta}{prime}(958){pi}{sup -}{nu}{sub {tau}} decay which proceeds through a second-class current and is expected to be forbidden in the limit of perfect isospin symmetry.

We study the smooth non-supersymmetric three-charge microstatesof Jejjala, Madden, Ross and Titchener using Kaluza-Klein reductions of the solutions to five and four dimensions. Our aim is to improve our understanding of the relation between these non-supersymmetric solutions and the well-studied supersymmetric cases. We find some surprising qualitative differences. In the five-dimensional description, the solution has orbifold fixed points which break supersymmetry locally, so the geometries cannot be thought of as made up of separate half-BPS centers. In the four-dimensional description, the two singularities in the geometry are connected by a conical singularity, which makes it impossible to treat them independently and assign unambiguous brane charges to these centers.

Due to their excellent corrosion resistance, iron aluminum alloys are currently being considered for use as weld claddings in fossil fuel fired power plants. The susceptibility to hydrogen cracking of these alloys at higher aluminum concentrations has highlighted the need for research into the effect of chromium additions on the corrosion resistance of lower aluminum alloys. In the present work, three iron aluminum alloys were exposed to simulated coal combustion environments at 500 C and 700 C for both short (100 hours) and long (5,000 hours) isothermal durations. Scanning electron microscopy was used to analyze the corrosion products. All alloys exhibited excellent corrosion resistance in the short term tests. For longer exposures, increasing the aluminum concentration was beneficial to the corrosion resistance. The addition of chromium to the binary iron aluminum alloy prevented the formation iron sulfide and resulted in lower corrosion kinetics. A classification of the corrosion products that developed on these alloys is presented. Scanning transmission electron microscopy (STEM) of the as-corroded coupons revealed that chromium was able to form chromium sulfides only on the higher aluminum alloy, thereby preventing the formation of deleterious iron sulfides. When the aluminum concentration was too low to permit selective oxidation of …

The results from H.E.S.S. observations towards Westerlund 2 are presented. The detection of very-high-energy gamma-ray emission towards the young stellar cluster Westerlund 2 in the HII complex RCW49 by H.E.S.S. provides ample evidence that particle acceleration to extreme energies is associated with this region. A variety of possible emission scenarios is mentioned, ranging from high-energy gamma-ray production in the colliding wind zone of the massive Wolf-Rayet binary WR 20a, collective wind scenarios, diffusive shock acceleration at the boundaries of wind-blown bubbles in the stellar cluster, and outbreak phenomena from hot stellar winds into the interstellar medium. These scenarios are briefly compared to the characteristics of the associated new VHE gamma-ray source HESS J1023-575, and conclusions on the validity of the respective emission scenarios for high-energy gamma-ray production in the Westerlund 2 system are drawn.

The historical trend of increasing single CPU performancehas given way to roadmap of increasing core count. The challenge ofeffectively utilizing these multi-core chips is just starting to beexplored by vendors and application developers alike. In this study, wepresent some performance measurements of several complete scientificapplications on single and dual core Cray XT3 and XT4 systems with a viewto characterizing the effects of switching to multi-core chips. Weconsider effects within a node by using applications run at lowconcurrencies, and also effects on node-interconnect interaction usinghigher concurrency results. Finally, we construct a simple performancemodel based on the principle on-chip shared resource--memorybandwidth--and use this to predict the performance of the forthcomingquad-core system.

We analyzed relative contributions to the cause andmechanism of injection-induced seismicity at The Geysers geothermalfield, California, using coupled thermal-hydrological-mechanicalmodeling. Our analysis shows that the most important cause forinjection-induced seismicity is injection-induced cooling and associatedthermal-elastic shrinkage that changes the stress state in such a waythat mechanical failure and seismicity can be induced. Specifically, thecooling shrinkage results in unloading and associated loss of shearstrength in critically shear-stressed fractures, which are thenreactivated. Thus, our analysis shows that cooling-induced shear slipalong fractures is the dominant mechanism of injection-induced seismicityat The Geysers.

The degree to which an individual organism maintains healthspan and lifespan is a function of complex interactions between genetic inheritance ('nature'), environment, including cultural inheritance (nurture) and stochastic events ('luck' or 'chance'). This task group will focus upon the role of chance because it is so poorly understood and because it appears to be of major importance in the determination of individual variations in healthspan and lifespan within species. The major factor determining variations in healthspan and lifespan between species is genetic inheritance. Broader aspects of cellular and molecular mechanisms of biological aging will also be considered, given their importance for understanding the cellular and molecular basis of successful aging. The task force will consider the cellular and molecular basis for nature, nurture and chance in healthspan and life span determination. On the basis of comparisons between identical and non-identical twins, geneticists have estimated that genes control no more than about a quarter of the inter-individual differences in lifespan (Herskind 1996). Twin studies of very old individuals, however, show substantially greater genetic contributions to Healthspan (McClearn 2004; Reed 2003). The environment clearly plays an important role in the length and the quality of life. Tobacco smoke, for example has the …

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radiofrequency (SCRF) accelerating cavities. The use of the SCRF technology was recommended by the International Technology Recommendation Panel (ITRP) in August 2004 [1], and shortly thereafter endorsed by the International Committee for Future Accelerators (ICFA). In an unprecedented milestone in high-energy physics, the many institutes around the world involved in linear collider R&D united in a common effort to produce a global design for the ILC. In November 2004, the 1st International Linear Collider Workshop was held at KEK, Tsukuba, Japan. The workshop was attended by some 200 accelerator physicists from around the world, and paved the way for the 2nd ILC Workshop in August 2005, held at Snowmass, Colorado, USA, where the ILC Global Design Effort (GDE) was officially formed. The GDE membership reflects the global nature of the collaboration, with accelerator experts from all three regions (Americas, Asia and Europe). The first major goal of the GDE was to define the basic parameters and layout of the machine--the Baseline Configuration. This was achieved at the first GDE meeting held at INFN, Frascati, Italy in December 2005 with the creation …

This month's issue has the following articles: (1) The Edward Teller Centennial--Commentary by George H. Miller; (2) Edward Teller's Century: Celebrating the Man and His Vision--Colleagues at the Laboratory remember Edward Teller, cofounder of Lawrence Livermore, adviser to U.S. presidents, and physicist extraordinaire, on the 100th anniversary of his birth; (3) Quark Theory and Today's Supercomputers: It's a Match--Thanks to the power of BlueGene/L, Livermore has become an epicenter for theoretical advances in particle physics; and (4) The Role of Dentin in Tooth Fracture--Studies on tooth dentin show that its mechanical properties degrade with age.

This report summarizes 4 years of research achievements in this Office of Science (BER), U.S. Department of Energy (DOE) project. The research described was conducted by scientists and supporting staff at Lovelace Respiratory Research Institute (LRRI)/Lovelace Biomedical and Environmental Research Institute (LBERI) and the Southern Urals Biophysics Institute (SUBI). All project objectives and goals were achieved. A major focus was on obtaining improved cancer risk estimates for exposure via inhalation to plutonium (Pu) isotopes in the workplace (DOE radiation workers) and environment (public exposures to Pu-contaminated soil). A major finding was that low doses and dose rates of gamma rays can significantly suppress cancer induction by alpha radiation from inhaled Pu isotopes. The suppression relates to stimulation of the body's natural defenses, including immunity against cancer cells and selective apoptosis which removes precancerous and other aberrant cells.

This White Paper summarizes the outcome of the Town Meeting on Phases of QCD that took place January 12-14, 2007 at Rutgers University, as part of the NSAC 2007 Long Range Planning process. The meeting was held in conjunction with the Town Meeting on Hadron Structure, including a full day of joint plenary sessions of the two meetings. Appendix A.1 contains the meeting agenda. This Executive Summary presents the prioritized recommendations that were determined at the meeting. Subsequent chapters present the essential background to the recommendations. While this White Paper is not a scholarly article and contains few references, it is intended to provide the non-expert reader

Liquid array technology has previously been used to show proof-of-principle of a multiplexed non structural protein serological assay to differentiate foot-and-mouth infected and vaccinated animals. The current multiplexed assay consists of synthetically produced peptide signatures 3A, 3B and 3D and recombinant protein signature 3ABC in combination with four controls. To determine diagnostic specificity of each signature in the multiplex, the assay was evaluated against a naive population (n = 104) and a vaccinated population (n = 94). Subsequently, the multiplexed assay was assessed using a panel of bovine sera generated by the World Reference Laboratory for foot-and-mouth disease in Pirbright, UK. This sera panel has been used to assess the performance of other singleplex ELISA-based non-structural protein antibody assays. The 3ABC signature in the multiplexed assay showed comparative performance to a commercially available non-structural protein 3ABC ELISA (Cedi test{reg_sign}) and additional information pertaining to the relative diagnostic sensitivity of each signature in the multiplex is acquired in one experiment. The encouraging results of the evaluation of the multiplexed assay against a panel of diagnostically relevant samples promotes further assay development and optimization to generate an assay for routine use in foot-and-mouth disease surveillance.

The Hanford K Basin Closure Project involves the retrieval, transfer and processing of radioactive contaminated slurries containing partially corroded spent nuclear fuel from the K Basin spent fuel pools. The spent fuel is primarily metallic fuel from the operation of the Hanford reactors. The Sludge Treatment Project is being designed to treat and package this material in preparation for ultimate disposal. The processing of the contaminated slurries includes further corrosion of the remaining uncorroded uranium metal in a large heated vessel to form a more stable metal oxide for packaging and storage.

The initiative will enable the COG Biopathology Center (Biospecimen Repository), the Molecular Genetics Laboratory and other participating reference laboratories to upload large data sets to the eRDES. The capability streamlines data currency and accuracy allowing the centers to export data from local systems and import the defined data to the eRDES. The process will aid in the best practices which have been defined by the Office of Biorepository and Biospecimen Research (OBBR) and the Group Banking Committee (GBC). The initiative allows for batch import and export, a data validation process and reporting mechanism, and a model for other labs to incorporate. All objectives are complete. The solutions provided and the defined process eliminates dual data entry resulting in data consistency. The audit trail capabilities allow for complete tracking of the data exchange between laboratories and the Statistical Data Center (SDC). The impact is directly on time and efforts. In return, the process will save money and improve the data utilized by the COG. Ongoing efforts include implementing new technologies to further enhance the current solutions and process currently in place. Web Services and Reporting Services are technologies that have become industry standards and will allow for further harmonization with caBIG …

None

This issue's special focus is on advanced lithium ionbatteries for hybrid electric vehicle applications. The four articlesaddressing this area explore the modeling of lithium ion batterychemistries; the use of advanced diagnostic methods to study the physicsand chemistry of battery materials; a laboratory for advanced batterytesting; and approaches for improving battery safety. EETD's research isfunded by the Department of Energy's BATT (Batteries for AdvancedTransportation Technologies) program, FreedomCar and Vehicle TechnologiesProgram.