This report was prepared to evaluate the compliance of Cask Transportation Facility Modifications (CTFM) to DOE Order 6430.1A.

A sodalite/glass ceramic waste form has been developed to immobilize highly radioactive nuclear wastes in chloride form, as part of an electrochemical cleanup process. Simulated waste forms have been fabricated which contain plutonium and are representative of the salt from the electrometallurgical process to recover uranium from spent nuclear fuel. X-ray absorption fine structure spectroscopy (XAFS) and x-ray absorption near-edge spectroscopy (XANES) studies were performed to determine the location, oxidation state and form of the plutonium within these waste forms. Plutonium, in the non-fission-element case, was found to segregate as plutonium(IV) oxide with a crystallite size of at least 20 nm. With fission elements present, the crystallite size was about 2 nm. No plutonium was observed within the sodalite or glass in the waste form.

A general decomposition of the amplitudes for the 2 {r_arrow} 2 processes {gamma}{nu} {r_arrow} {gamma}{nu} and {gamma}{gamma} {r_arrow} {nu}{bar {nu}} is obtained using gauge invariance and Bose symmetry. The restrictions implied by this decomposition are investigated for the reaction {gamma}{gamma} {r_arrow} {nu}{bar {nu}} by computing the one-loop helicity amplitudes in the standard model. In the center of mass, where {radical}s = 2{omega}, the cross section grows roughly as {omega}{sup 6} up to the threshold for W-boson production, {radical}s = 2m{sub W}. Astrophysical implications of very high energy photon-neutrino interactions are discussed.

We report a new measurement of A{sub c} using data obtained by SLD in 1993-98. This measurement uses a vertex tag technique, where the selection of a c hemisphere is based on the reconstructed mass of the charm hadron decay vertex. The method uses the 3D vertexing capabilities of SLD's CCD vertex detector and the small and stable SLC beams to obtain a high c-event tagging efficiency and purity of 28% and 82%, respectively. Charged kaons identified by the CRID detector and the charge of the reconstructed vertex provide an efficient quark-antiquark tag, with the analyzing power calibrated from the data. We obtain a preliminary result of A{sub c} = 0.603 {+-} 0.028 {+-} 0.023.

The objective of this test is to determine the DR-Reactor effluent systems characteristics under 95 degrees Celsius bulk temperature operation. This proposed bulk temperature increase from 93.5 to 95 degrees represents a 33% decrease in the bulk temperature suppression below the boiling point. A major aim of this test will be to evaluate the degree of increased maintenance at this higher temperature operation. The basis and justification, test preparation and instrumentation, procedure, costs, outage time, hazards, standards, and responsibilities are discussed in this document.

Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively. Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.

Ultraviolet resonance Raman spectroscopy (UVRRS) using 244nm excitation was used to investigate the impact of aging on humandentin. The intensity of a spectroscopic feature from the peptide bondsin the collagen increases with tissue age, similar to a finding reportedpreviously for human cortical bone.

Supersedes ITR-1421. Twelve large-diameter buried conduit sections of various shapes were tested in the 60- to l49-psi overpressure region of Burst Priscilla to make an empirical determination of the degree of personnel protection afforded by commercially available steel and concrete conduits at depths of burial of 5, 7.5, and 10 feet below grade. Essentially, it was desired to assure that Repartment of Defense Class I, 100psi and comparable radiations, and Class II, 50-psi and comparable radiations, protection is afforded by use of such conduits of various configurations. Measurements were made of free-field overpressure at the ground surface above the structure; pressure inside the structures; acceleration of each structure; deflection of each structure; dust inside each structure; fragmentary missiles inside the concrete structures; and gamma and neutron radiation dose inside each structure. All buried conduit sections tested provided adequate Class I protection for the conditions under which the conduits were tested. Standard 8-foot concrete sewer pipe withstood 126-psi overpressure without significant damage, minor tension cracks observed; standard 10-gage corrugated-steel 8-foot circular conduit sections withstood 126- psi overpressure without significant damage; and standard 10-gage corrugated- steel cattle-pass conduits withstood 149-psi overpressure without significant damage. Durations of positive pressure were from 206 to …

This report provides a technical basis for estimating the level of corrosion products in materials stored in DOE-STD-3013 containers based on extrapolating available chemical sample results. The primary focus is to estimate the levels of nickel, iron, and chromium impurities in plutonium-bearing materials identified for disposition in the United States Mixed Oxide fuel process.

The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals.

Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail …

It is known that filtered cathodic-arc-deposited ta-C films have outstanding properties even within the family of diamondlike materials. However, filtering of macroparticles is usually incomplete or accompanied by significant plasma losses. Ongoing research effort is directed towards the following goals: (1) complete elimination of macro- and nanoparticles from the vacuum arc plasma, (2) increase of plasma utilization in the cathodic-arc and macroparticle-filter system, (3) precise control and reproducibility of film deposition, and (4) synthesis of ultrathin films (< 5 nm) that meet requirements of the magnetic storage industry. The development of new filters, in particular the ''Twist Filter'', enables cathodic arc plasma deposition to synthesize ultrathin ta-C films of 3 nm on heads that pass corrosion and other relevant tests. We describe the Twist Filter system and report about recent ta-C tests results. In light of these results, even thinner films seem to be possible.

The overall goal of the project described in this report is to provide a sound scientific basis for operation of the Federal Columbia River Power System (FCRPS) in ways that will effectively protect and enhance chum salmon populations - a species listed in March 1999 as threatened under the Endangered Species Act of 1973 (ESA). The study objective during fiscal year 2008 was to provide real-time data on Ives Island area water temperature and water surface elevations from the onset of chum salmon spawning through the end of chum salmon emergence. Sampling locations included areas where riverbed temperatures were elevated, potentially influencing alevin development and emergence timing. In these locations, hydrosystem operation caused large, frequent changes in river discharge that affected salmon habitat by dewatering redds and altering egg pocket temperatures. The 2008 objective was accomplished using temperature and water-level sensors deployed inside piezometers. Sensors were integrated with a radio telemetry system such that real-time data could be downloaded remotely and posted hourly on the Internet. During our overall monitoring period (October 2007 through June 2008), mean temperature in chum spawning areas was nearly 2 C warmer within the riverbed than in the overlying river. During chum salmon spawning (mid-November …

The overall goal of the project described in this report is to provide a sound scientific basis for operation of the Federal Columbia River Power System (FCRPS) in ways that will effectively protect and enhance chum salmon populations----a species listed in March 1999 as threatened under the Endangered Species Act of 1973 (ESA). The study objective during fiscal year 2008 was to provide real-time data on Ives Island area water temperature and water surface elevations from the onset of chum salmon spawning through the end of chum salmon emergence. Sampling locations included areas where riverbed temperatures were elevated, potentially influencing alevin development and emergence timing. In these locations, hydrosystem operation caused large, frequent changes in river discharge that affected salmon habitat by dewatering redds and altering egg pocket temperatures. The 2008 objective was accomplished using temperature and water-level sensors deployed inside piezo¬meters. Sensors were integrated with a radio telemetry system such that real-time data could be downloaded remotely and posted hourly on the Internet.

As a result of the Safeguards Arrangement between the US Department of Energy (DOE) and the Australian Safeguards and Non-Proliferation Office (ASNO) concerning international safeguards R and D, ASNO and Sandia National Laboratories (SNL) have agreed to jointly develop a remote monitoring system at the HIFAR reactor, Lucas Heights, Australia. The HIFAR reactor is a high flux research reactor operated by the Australian Nuclear Science and Technology Organization (ANSTO). The objective of the system is to remotely monitor the entire Material Balance Area (MBA) AS-A to include: fresh fuel the reactor core; spent fuel in the cropping/irradiation pond, international pond, dry spent fuel storage facility, and Dounreay flasks; and spent fuel during designated transport. The purpose is to reduce on-site inspection effort at the HIFAR reactor.

The authors present improved measurements of the branching fraction {Beta}, the longitudinal polarization fraction f{sub L}, and the direct CP asymmetry A{sub CP} in the B meson decay channel B{sup +} {yields} {rho}{sup +}{rho}{sup 0}. The data sample was collected with the BABAR detector at SLAC. The results are {Beta}(B{sup +} {yields} {rho}{sup +}{rho}{sup 0}) = (23.7 {+-} 1.4 {+-} 1.4) x 10{sup -6}, f{sub L} = 0.950 {+-} 0.015 {+-} 0.006, and A{sub CP} = -0.054 {+-} 0.055 {+-} 0.010, where the uncertainties are statistical and systematic, respectively. Based on these results, they perform an isospin analysis and determine the CKM weak phase angle {alpha} to be (92.4{sub -6.5}{sup +6.0}){sup 0}.

Optically activated, high gain GaAs switches are being tested for many different applications. TWO such applications are ground penetrating radar (GPR) and firing set switches. The ability of high gain GaAs Photoconductive Semiconductor Switches (PCSs) to deliver fast risetime pulses makes them suitable for their use in radars that rely on fast impulses. This type of direct time domain radar is uniquely suited for the detection of buried items because it can operate at low frequency, high average power, and close to the ground, greatly increasing power on target. We have demonstrated that a PCSs based system can be used to produce a bipolar waveform with a total duration of about 6 ns and with minimal ringing. Such a pulse is radiated and returns from a 55 gallon drum will be presented. For firing sets, the switch requirements include small size, high current, dc charging, radiation hardness and modest longevity. We have switched 1 kA at 1 kV and 2.8 kA at 3 kV dc charge.

We have measured solute trapping of several solutes in Al and Ni during rapid solidification. We have also made preliminary measurements of solute trapping of As in Si, trapped 20 atomic percent As in Si, and made a preliminary measurement of the T{sub o} curve in Si-As. 5 figs.

We have measured solute trapping of several solutes in Al and Ni during rapid solidification. We have also made preliminary measurements of solute trapping of As in Si, trapped 20 atomic percent As in Si, and made a preliminary measurement of the T{sub o} curve in Si-As. 5 figs.

Research over the past decade has studied the adsorption of plutonium and uranium onto monosodium titanate (MST) in alkaline solutions. Tests showed that MST would remove the targeted radionuclides from simulated alkaline waste. Testing also indicated that Pu removal kinetics and Np capacity of the MST material impacts the size of equipment and waste blending plans for the Salt Waste Processing Facility (SWPF). Additionally, calculations suggested the baseline MST process may not achieve the desired decontamination in wastes containing elevated concentrations of Pu and Np. In this task, the authors investigated the performance of non-baseline process parameters and their effectiveness for treating waste feed in the Salt Waste Processing Facility. The work addresses a DOE request in support of technical needs expressed, in part, by the Engineering, Procurement, and Construction Contractors for the Salt Waste Processing Facility. The work investigated the effect of increased MST addition (up to 1.2 g/L) and the benefit of extra filtration steps with multiple additions of MST to salt waste containing actinides and strontium. Both simulant and actual waste testing occurred. Actual waste tests used a Tank 39H composite waste solution. In addition, testing to determine desorption of actinides from residual MST occurred. The release …

The purpose of this testing and evaluation plan (TEP) is to provide the high level guidance on testing requirements for ensuring that the equipment and systems to be implemented for remediation of the SY-101 waste level rise USQ are effective.

A solution of Pu was prepared for use in a re-investigation of the present 49 titration method. Three 500 microliter portions of the sample were dried and ignited to PuO{sub 2}. From the weight of the residue and the impurity analysis, the concentration, in g/l, of the solution was found to be 222.2, 221.5, and 222.5; average of 222.0. The six samples submitted to the control laboratory in Bldg. 231 were reported as: 219.3, 223.6, 221.5, 220.9, 222.3, and 228.2 (re-run 229.3); average of 222.6 g/l. The 234-5 Laboratory reported: 228.2, 233.3, 220.2, 236.1, 225.2 (re-run 220.6), and 227.9; average of 227.3 g/l. Since the standardization was carried out on April 13, the 231 Lab received its samples on May 11, and the 234-5 Lab received their samples on May 23, a correction for increase in concentration due to decomposition of the water by alpha particles and evaporation was calculated. It was determined that the results reported by the 231 Lab were very consistent (except for one determination) and that the average value agreed with the gravimetric determination. The average results from the 234-5 Lab are 2% higher than the gravimetric results. Further studies are being made on the chemical …

A regenerating biochemical mixture and organic surfactant has been applied to wells in the East Texas Field with the goal of restoring permeability, reversing formation damage, mobilizing hydrocarbons, and ultimately increasing production. Initial work in task 1 was designed to open the perforations and remove blockages of scale, asphaltene, and other corrosion debris. This was accomplished on three wells that produce from the Woodbine, and was necessary to prepare the wells for more substantial future treatments. Secondly, in task 2, two wells were treated with much larger quantities of the biochemical mixture, e.g. 25 gallons, followed by approximately 140 barrels of a 2% KCl solution that carried the active biochemical solution into the near wellbore area and into the producing reservoir. After a 7 to 10 day acclamation and reaction period, the wells were put back into production. The biochemical solution successfully broke down the scale, paraffin and other binders blocking permeability and released significant debris which was immediately produced into the flowlines and separators. Oil production was clearly improved and the removed debris was a maintenance issue until the surface equipment could be modified. Next steps include larger treatments and tracer tests to better understand the fluid flow dynamics.

A complete edge-weighted directed graph on vertices 1,2,...,n that assigns cost c(i,j) to the edge (i,j) is called Monge if its edge costs form a Monge array, i.e., for all i < k and j < l, c[i, j]+c[k,l]{le} < c[i,l]+c[k,j]. One reason Monge graphs are interesting is that shortest paths can be computed quite quickly in such graphs. In particular, Wilber showed that the shortest path from vertex 1 to vertex n of a Monge graph can be computed in O(n) time, and Aggarwal, Klawe, Moran, Shor, and Wilber showed that the shortest d-edge 1-to-n path (i.e., the shortest path among all 1-to-n paths with exactly d edges) can be computed in O(dn) time. This paper`s contribution is a new algorithm for the latter problem. Assuming 0 {le} c[i,j] {le} U and c[i,j + 1] + c[i + 1,j] {minus} c[i,j] {minus} c[i + 1, j + 1] {ge} L > 0 for all i and j, our algorithm runs in O(n(1 + 1g(U/L))) time. Thus, when d {much_gt} 1 + 1g(U/L), our algorithm represents a significant improvement over Aggarwal et al.`s O(dn)-time algorithm. We also present several applications of our algorithm; they include length-limited Huffman coding, finding the …