Progress made on accomplishing research objectives is reported. The objectives of this project are: (1) to increase the biomass production of Eucalyptus; (2) to determine the optimum requirements to maximize yield; (3) to assess planting, cultivation, harvesting, and transportation equipment requirements; (4) to determine the optimum mixture of biomass (eucalyptus and bagasse) at the generator for the production of electricity; and (5) to evaluate a complete production/conversion system which utilized optimum management conditions in relationship to costs. (DMC)

A remote dissolution and analytical program for irradiated thorium is given. The aluminum jacket on the slug was dissolved with 6M nitric acid and 0.005M mercuric nitrate. After a water wash, the thorium dissolution was accomplished with concentrated nitric acid made 0.04M in hydrofluoric acid. Weighing, dissolving, and sampling were done remotely in the multicurie cell at the Idaho Chemical Processing Plant. Handling techniques for weighing and dissolving the slugs are described. Transferring and sampling apparatus as well as sampling techniques for the dissolved material are discussed. Analytical data obtained are tabulated. Abstracts of analytical methods for uranium concentration and isotope ratio, aluminum, thorium, cesium, and cerium are given. (auth)

A quantitative study of mixing, which utilized the exit age distribution theory, has been completed for bench-scale annular and raschig ring filled tanks, in addition to a pilot-scale annular tank. A study of mixing and fluid flow in a full-scale, single-entry, raschig ring filled tank also was initiated. Results showed the bench-scale raschig ring filled tank approached plug-flow (no mixing) behavior. In a bench-scale annular tank, regardless of whether fluid entered tangentially or nontangentially, the vessel approached continuously stirred tank reactor behavior (perfect mixing). The pilot-scale annular tank approached continuously stirred tank reactor behavior only when tangential entry was used. Mixing in the full-scale raschig ring filled tank he tank did not approach eithr the perfect or the no mixing situations. Instead, the tank had a flow pattern in which solution channeled through a small volume of the tank, leaving the regions outside the channel effectively inactive.

A general review of the technical merits of nuclear thermal rocket clustering is presented. A summary of previous analyses performed during the Rover program is presented and used to assess clustering in the context of projected Space Exploration Initiative missions. A number of technical issues are discussed including cluster reliability, engine-out operation, neutronic coupling, shutdown core power generation, shutdown reactivity requirements, reactor kinetics, and radiation shielding. 7 refs., 3 figs., 2 tabs.

A conceptual design of a laser fusion power plant is extensively discussed. Recent advances in high gain targets are exploited in the design. A smaller blanket structure is made possible by use of a thick falling region of liquid lithium for a first wall. Major design features of the plant, reactor, and laser systems are described. A parametric analysis of performance and cost vs. design parameters is presented to show feasible design points. A more definitive follow-on conceptual design study is planned. (RME)

Supersedes ITR-1421. Twelve large-diameter buried conduit sections of various shapes were tested in the 60- to l49-psi overpressure region of Burst Priscilla to make an empirical determination of the degree of personnel protection afforded by commercially available steel and concrete conduits at depths of burial of 5, 7.5, and 10 feet below grade. Essentially, it was desired to assure that Repartment of Defense Class I, 100psi and comparable radiations, and Class II, 50-psi and comparable radiations, protection is afforded by use of such conduits of various configurations. Measurements were made of free-field overpressure at the ground surface above the structure; pressure inside the structures; acceleration of each structure; deflection of each structure; dust inside each structure; fragmentary missiles inside the concrete structures; and gamma and neutron radiation dose inside each structure. All buried conduit sections tested provided adequate Class I protection for the conditions under which the conduits were tested. Standard 8-foot concrete sewer pipe withstood 126-psi overpressure without significant damage, minor tension cracks observed; standard 10-gage corrugated-steel 8-foot circular conduit sections withstood 126- psi overpressure without significant damage; and standard 10-gage corrugated- steel cattle-pass conduits withstood 149-psi overpressure without significant damage. Durations of positive pressure were from 206 to …

The first results are given for the conceptual design of a short-wavelength gas laser system suitable for use as a driver (high average power ignition source) for a commercial laser fusion power plant. A comparison of projected overall system efficiencies of photolytically excited oxygen, sulfur, selenium and iodine lasers is described, using a unique windowless laser cavity geometry which will allow scaling of single amplifier modules to 125 kJ per aperture for 1 ns pulses. On the basis of highest projected overall efficiency, a selenium laser is chosen for a conceptual power plant fusion laser system. This laser operates on the 489 nm transauroral transition of selenium, excited by photolytic dissociation of COSe by ultraviolet fluorescence radiation. Power balances and relative costs for optics, electrical power conditioning and flow conditioning of both the laser and fluorescer gas streams are discussed for a system with the following characteristics: 8 operating modules, 2 standby modules, 125 kJ per module, 1.4 pulses per second, 1.4 MW total average power. The technical issues of scaling visible and near-infrared photolytic gas laser systems to this size are discussed.

The equipment and procedures to be used to demonstrate the bypass flow characteristics of the Radiator Bypass Valve, P/N 720990, in the Kilowatt Isotope Power System are described. (LCL)

The use of an electronic high-speed camera in the streaking mode to record interference fringe motion from a velocity interferometer is discussed. Advantages of this method over the photomultiplier tube-oscilloscope approach are delineated. Performance testing and data for the electronic streak camera are discussed. The velocity profile of a mylar flyer accelerated by an electrically exploded bridge, and the jump-off velocity of metal targets struck by these mylar flyers are measured in the camera tests. Advantages of the streak camera include portability, low cost, ease of operation and maintenance, simplified interferometer optics, and rapid data analysis. (RME)

Phase I Preliminary Design and Evaluation for a Grid Connected Thermally Controlled Integrated Community Energy System (ICES) for Trenton, New Jersey has been carried out. The findings of the study are that: it is technically feasible, utilizing commercially available hardware; it is economically competitive with conventional alternatives for heating and cooling buildings; it will produce an overall reduction in fuel consumed of 32 to 43% when compared with conventional alternatives for heating and cooling buildings; it will consume 4 to 9% more oil than will conventional alternatives for heating and cooling buildings; it should be owned and operated by Public Service Electric and Gas Co. (PSE and G); and it can provide thermal energy 21 months after the start of Phase II and electrical energy 32 months after the start of Phase II. This study is site-specific and of a small-size project. Its installation will not alter the planned PSE and G capacity expansion program. The economic evaluation results of the report cannot be extrapolated for numerous co-generation installations that would affect the PSE and G planned capacity-expansion program.

This plan for the Rocky Mountain Basin and Range Region articulates the complete range of initiatives (federal, state, local, and industrial) required for the early commercialization of the regions geothermal resources. (MHR)

Laboratory radioactive sources were used to characterize the phoswich detector. The CaF{sub 2} scintillator has a low light-yield and slow decay time, thus produces very small signals due to low-energy gamma rays or X-rays. Therefore, detection of 30 keV X-rays (from the xenon radioisotopes) using this layer and discriminating its very small signals from electronic noise was a challenging task. Several solutions were considered and experimentally evaluated. We found that the best solution would be extending the fast triangular filter from 10 taps to 30 taps. This will extend the peaking time of this filter from 25 nsec to 75 nsec. The digital filter is implemented in FPGA on our DPP2.0 and is used to trigger the detection system. Functionality of the new filter in capturing and discriminating 30 keV X-rays was confirmed by using a {sup 133}Ba gamma-ray source. Development of the DPP GUI software has continued with the addition of two new panels to display histograms of beta/gamma and beta/x-ray coincidence events. This includes coincidence events from a single channel, as well as two-channel, coincidence event. A pileup rejection algorithm has been implemented in the FPGA code, and controls to adjust its sensitivity have been added to the …

We report on the results of a visual search for galaxy-scale strong gravitational lenses over 650 arcmin2 of HST/ACS imaging in the Extended Groth Strip (EGS). These deep F606W- and F814W-band observations are in the DEEP2-EGS field. In addition to a previously-known Einstein Cross also found by our search (the ''Cross'', HSTJ141735+52264, with z{sub lens} = 0.8106 and a published z{sub source} = 3.40), we identify two new strong galaxy-galaxy lenses with multiple extended arcs. The first, HSTJ141820+52361 (the ''Dewdrop''; z{sub lens} = 0.5798), lenses two distinct extended sources into two pairs of arcs (z{sub source} = 0.9818 by nebular [O{sub II}] emission), while the second, HSTJ141833+52435 (the ''Anchor''; z{sub lens} = 0.4625), produces a single pair of arcs (source redshift not yet known). Four less convincing arc/counter-arc and two-image lens candidates are also found and presented for completeness. All three definite lenses are fit reasonably well by simple singular isothermal ellipsoid models including external shear, giving {chi}{sub {nu}}{sup 2}values close to unity. Using the three-dimensional line-of-sight (LOS) information on galaxies from the DEEP2 data, we calculate the convergence and shear contributions {kappa}{sub los} and {gamma}{sub los} to each lens, assuming singular isothermal sphere halos truncated at 200 h{sup -1} …

We review recent results for the chiral behavior of meson masses and decay constants and the determination of the light quark masses by the RBC and UKQCD collaborations. We find that one-loop SU(2) chiral perturbation theory represents the behavior of our lattice data better than one-loop SU(3) chiral perturbation theory in both the pion and kaon sectors. The simulations have been performed using the Iwasaki gauge action at two different lattice spacings with the physical spatial volume held approximately fixed at (2.7fm){sup 3}. The Domain Wall fermion formulation was used for the 2+1 dynamical quark flavors: two (mass degenerate) light flavors with masses as light as roughly 1/5 the mass of the physical strange quark mass and one heavier quark flavor at approximately the value of the physical strange quark mass, On the ensembles generated with the coarser lattice spacing, we obtain for the physical average up- and down-quark and strange quark masses m{sub ud}{sup {ovr MS}} (2 GeV) = 3.72(0.16){sub stat}(0.33){sub ren}(0.18){sub syst}MeV and m{sub s}{sup {ovr MS}} (2 GeV) = 107.3(4.4){sub stat}(9.7){sub ren}(4.9){sub syst} MeV, respectively, while they find for the pion and kaon decay constants f{sub {pi}} = 124.1(3.6){sub stat}(6.9){sub syst}MeV, f{sub K} = 149.6(3.6){sub stat}(6.3){sub syst} …

We describe the performance of various materials used as thethermal interface between silicon to silicon and silicon to copper jointswhen operated at ~;120K and loaded with ~;20 watts of thermal power. Wefind that only the indium based silicon-to-silicon joint isreliable.

None

To investigate the possibility of using HOM signals induced in SC cavities as beam and cavity diagnostics, narrow band (20 MHz) data was recorded around the strong TE111-6(6{pi}/9-like) dipole modes (1.7 GHz) in the 40 L-band (1.3 GHz) cavities at the DESY TTF facility. The analyses of these data have so far focused on using a Singular Value Decomposition (SVD) technique to correlate the signals with each other and data from conventional BPMs to show the dipole signals provide an alternate means of measuring the beam trajectory. However, these analyses do not extract the modal information (i.e., frequencies and Q's of the nearly degenerate horizontal and vertical modes). In this paper, we described a method to fit the signal frequency spectrum to obtain this information, and then use the resulting mode amplitudes and phases together with conventional BPM data to determine the mode polarizations and relative centers and tilts. Compared with the SVD analysis, this method is more physical, and can also be used to obtain the beam position and trajectory angle.

All of the available evidence leads to the view that the 5f electron shell is being filled in the heaviest elements giving rise to a transition series which begins with actinium in the same sense that the rare earth or 'lanthanide' series begins with lanthanum. Such an 'actinide' series is suggested on the basis of evidence in the following lines: (1) chemical properties, (2) absorption spectra in aqueous solution and crystals, (3) crystallographic structure data, (4) magnetic susceptibility data and (5) spectroscopic data. The salient point is that the characteristic oxidation state (i.e., the oxidation state exhibited by the member containing seven 5f and presumably also by the member containing fourteen 5f electrons, curium and element 103) is the III state, and the group is placed in the periodic table on this basis. The data also make it possible to give a suggested table of electronic configurations of the ground state of the gaseous atom for each of the elements from actinium to curium inclusive.

A high resolution soft x-ray photoelectron spectroscopic study of Ga and As 3d core levels has been conducted for Fe/GaAs (001) as a function of Fe thickness. This work has provided unambiguous evidence of substrate disrupting chemical reactions induced by the Fe overlayer--a quantitative analysis of the acquired spectra indicates significantly differing behavior of Ga and As during Fe growth, and our observations have been compared with existing theoretical models. Our results demonstrate that the outdiffusing Ga and As remain largely confined to the interface region, forming a thin intermixed layer. Whereas at low coverages Fe has little influence on the underlying GaAs substrate, the onset of substrate disruption when the Fe thickness reaches 3.5 Angstrom results in major changes in the energy distribution curves (EDCs) of both As and Ga 3d cores. Our quantitative analysis suggests the presence of two additional As environments of metallic character: one bound to the interfacial region and another which, as confirmed by in situ oxidation experiments, surface segregates and persists over a wide range of overlayer thickness. Analysis of the corresponding Ga 3d EDCs found not two, but three additional environments--also metallic in nature. Two of the three are interface resident whereas the …

In March 1990, the Shoshone-Bannock Tribes petitioned the National Marine Fisheries Service (NMFS) to list Snake River sockeye salmon (Oncorhynchus nerka) as endangered. Snake River sockeye salmon were officially listed as endangered in November 1991 under the Endangered Species Act (56 FR 58619). In 1991, the Snake River Sockeye Salmon Habitat and Limnological Research Project was implemented. This project is part of an interagency effort to prevent the extinction of the Redfish Lake stock of Snake River sockeye salmon. The Shoshone-Bannock Tribal goal for this project is two tiered: The immediate goal is to increase the population of Snake River sockeye salmon while preserving the unique genetic characteristics of the Evolutionarily Significant Unit (ESU). The Tribes long term goal is to maintain a viable population that warrants delisting and provides Tribal harvest opportunities. The Bonneville Power Administration (BPA) provides funding for this interagency recovery. Collaborators in the recovery effort include the National Oceanic and Atmospheric Administration (NOAA), the Idaho Department of Fish and Game (IDFG), the University of Idaho (UI), and the Shoshone-Bannock Tribes (SBT). This report summarizes activities conducted by Shoshone-Bannock Tribal Fisheries Department personnel during the 2005 calendar year. Project tasks include: (1) monitor limnological parameters of the …

The next generation of synchrotrons and free electron laser facilities requires x-ray optical systems with extremely high performance, generally of diffraction limited quality. Fabrication and use of such optics requires adequate, highly accurate metrology and dedicated instrumentation. Previously, we suggested ways to improve the performance of the Long Trace Profiler (LTP), a slope measuring instrument widely used to characterize x-ray optics at long spatial wavelengths. The main way is use of a CCD detector and corresponding technique for calibration of photo-response non-uniformity [J. L. Kirschman, et al., Proceedings of SPIE 6704, 67040J (2007)]. The present work focuses on the performance and characteristics of the upgraded LTP-II at the ALS Optical Metrology Laboratory. This includes a review of the overall aspects of the design, control system, the movement and measurement regimes for the stage, and analysis of the performance by a slope measurement of a highly curved super-quality substrate with less than 0.3 microradian (rms)slope variation.

As this was the final year of the research contract, most of the activities centered on completing some of the research in progress, and an orderly transition to other activities. Overall, the recent years of the project have been successful as evidenced by the accomplishments listed below and the papers published between 2005 and the present, as well as their impact and the cooperation they have encouraged with people qt other universities and industry.

The authors present improved measurements of the branching fraction {Beta}, the longitudinal polarization fraction f{sub L}, and the direct CP asymmetry A{sub CP} in the B meson decay channel B{sup +} {yields} {rho}{sup +}{rho}{sup 0}. The data sample was collected with the BABAR detector at SLAC. The results are {Beta}(B{sup +} {yields} {rho}{sup +}{rho}{sup 0}) = (23.7 {+-} 1.4 {+-} 1.4) x 10{sup -6}, f{sub L} = 0.950 {+-} 0.015 {+-} 0.006, and A{sub CP} = -0.054 {+-} 0.055 {+-} 0.010, where the uncertainties are statistical and systematic, respectively. Based on these results, they perform an isospin analysis and determine the CKM weak phase angle {alpha} to be (92.4{sub -6.5}{sup +6.0}){sup 0}.

The electrochemical performance of LiFePO{sub 4} in lithium cells is strongly dependent on the structure (disordered/graphene or D/G ratio) of the in situ carbon produced during synthesis from carbon-containing precursors. Addition of pyromellitic acid (PA) prior to final calcination results in lower D/G ratios, yielding a higher-rate material. Further, improvements in electrochemical performance are realized when graphitization catalysts such as ferrocene are also added during LiFePO{sub 4} preparation, although overall carbon content is still less than 2 wt.%.