Abstract: "This paper gives an arithmetic method of computing the number of sections required in a catalytic tower to produce a given enrichment. It also tells how to calculate the enrichment of a tower with a given number of sections. The problem of the most economical design of catalytic towers is solved. Methods are given for determining the temperature, the efficiencies of catalyst beds and strippers, the relative production rate, and the water vapor-hydrogen gas ratio which give the optimum combination of operating pressure, cross sectional area, number of sections, and volume of catalyst in the tower. Simple directions as to how to make the calculations are included."

Technical report covering (1) analysis of uranium bromide and chloride samples, (2) the ferric-nitrate method of analyzing uranium fluorides for fluorine, (3) spectrographic determination of boron, cadmium and manganese in magnesium metal, (4) service analyses. contributions to other problems, (5) attempted preparation of uranous oxyfluoride, and (6) corrections in previous reports.

Apparatus, field layout, miscellaneous testing, and the method of analysis of a 100-ton test at Trinity.

A diffusion pump having a rectangular mouth 1' by 3' in the vertical plane, employing linear jets.

Report discussing procedures for analyzing the quantity of plutonium in stool samples. Ashing methods are described, as well as methods for extraction of plutonium from the stool.

Abstract: "Using xylene as the densimetric solvent, the crystal densities have been determined by the pyknometric method for the following chlorides, UCl3, UCl4, UCl6(UCl4), UCl6 and U02Cl2."

This report describes the use of pile control over atomic power, including the different methods of control.

Technical report includes three reports of research progress: 1)Meson Mass Determination by Grain Counting, W. H. Barkas; 2) The Magnetic Beta Ray Lens Spectrograph, A. C. Helmholz; 3) Anthracene Counters, E. Martinelli.

Purpose: "To study the value of electrical induction methods for the measurement of liquid and interface levels."

Report discussing the progress made on a research project for the preparation of ductile zirconium during April 1949.

The absolute excitation functions for the production of fission by charged particle bombardment in several substances were investigated at both high and low energies. The low energy work was done at the 60-inch Crocker cyclotron with alpha particles and deuterons, while the high energy work was done at the 184-inch cyclotron with alpha particles, deuterons, and protons.

Report on the atomic bomb injuries in Hiroshima City.

Report discussing the progress made on the Experimental Breeder Project during the period from March 1, 1949 to January 31, 1950.

Report discussing a procedure for the preparation of anhydrous vanadium trifluoride. From abstract: "By selecting proper operating conditions and equipment, a method of preparation was devised such that anhydrous vanadium trifluoride of high purity was produced reliably in five pound batches." The method of preparation involves manipulating the starting material, vanadium pentoxide.

From abstract: This paper presents temperature-entropy and Mollier charts for sodium, and describes briefly the method used for their construction, based upon data from the literature.

Technical report describing results on work which cannot be ascribed to one reactor program. Outlines the results of miscellaneous corrosion testing, the development of new shielding materials, the testing of irradiated plastics, and general heat transfer investigation. [From Preface]

Calculations are developed which indicate the Pu production is an infinite lattice

A complete investigation was made of the r-f field in the 1/10-scale Materials Testing Accelerator (Mark I) cavity

From abstract: "This report outlines a method for selecting materials including alloys for use as a structural member in a neutron flux based on its thermal neutron absorption properties."

The following report describes the process of the determination of hydrogen in magnesium, lithium, and magnesium alloys, including methods of analyzing magnesium-lithium alloys for hydrogen, and the tin-fusion method used for determining the hydrogen content of pure magnesium that can also be used to analyze pure lithium for hydrogen.

From abstract: "The rate of hydrolysis of TBP and the effect of the hydrolysis products in the Purex Process have been studied. Hydrolytic conditions may be encountered in the process which would lead to formation of dibutyl phosphoric acid, causing significant losses of tetravalent plutonium in stripping. This situation may be easily alleviated by reducing and stripping the plutonium in the trivalent state."

This report will summarize what has been done and present the interpretations made at this stage of the program.

From introduction: During the summer of 1951, Navajos conducted John W. Chester, Russell C. Cutter, and E. V. Reinhardt, Grand Junction Exploration Branch, U. S. Atomic Energy Commission, to a copper deposit in Copper Canyon. Little radioactivity was noted, and no further work was done in the area at that time. In October 1951, the same group of Navajos reported the discovery of uranium ore in another portion of the same area. The site was visited by Cutter who noted that an excavation made by the Navajos had disclosed a 3-foot thickness of low-grade uranium ore. In November 1951, Cutter again visited the area and observed that the Navajos had opened a 5-foot face of good ore.

Discussing a reconnaissance carried out of the Wilson Mesa and Upper Brumley Ridge, in San Juan County, Utah