Technical report outlining a method for the electrodeposition of adherent deposits of both aluminum and zirconium on uranium. Report finds that current efficiencies are good for aluminum deposition but low for the zirconium baths. [From Abstract]

Technical report describing the tests on types 309, 316, and 347 stainless steel. These steels were tested for a total of 779 to 828 hours in three different synthetic waste solutions. Results shoe that the best all-around corrosion resistance to the test conditions was exhibited by 316 stainless steel, but in one solution 347 stainless steel was more resistant. [From Abstract]

Technical report detailing kinetic equations that have been developed for a boiling-type reactor and inherent reactor stability studies that have been made on the basis of these equations. Presents features of the proposed reactor, comparisons of circulating types, investigations of bubble-rise velocities, effects of transient conditions of vapor mass in steam chest, and bubble time delay functions yield favorable results. [From Abstract]

From introduction: "The tube arrangement covered in this report was proposed in June, 1950, as a means of halving the weight and volume required for the heat exchanger. Ideally, the pressure drop across this arrangement should be little more than that required to overcome the skin friction on the tube surfaces. If the pressure drop across the tube spacers and in the cross-flow regions can be kept low, this ideal can be approached. much of the test work covered in this report was devoted to this phase of the problem."

In scouting tests, a number of metals used in nuclear reactor fuel elements were dissolved by 44.5-48.5-7.0 mole % ZrF4-KF-NaF fused salt at 675°C through which HF was being passed. These included type 304 stainless steel at 4 mils/hr; type 347Nb stainless steel at 7 mils/hr; thorium at 14 mils/hr; nonirradiated uranium at 17 mils/hr; zirconium at 22-35 mils/hr; titanium at 31 mils/hr; and Zircaloy-2 at 22-46 mils/hr. Only small amounts of volatile fission products formed when irradiated uranium was dissolved. Variables that appear to affect the dissolution rate are the composition of the fused fluoride, the fused fluoride temperature, the HF flow rate, the metallurgical characteristics of the material being dissolved, and the presence of other metals. The low dissolution rate of 0.001 mil/hr observed for nickel suggests that it may be suitable as a material of construction for reaction vessels.

Progress report of the Oak Ridge National Laboratory Biology Division providing updates on various projects, experiments, and other work. This report includes a summary of scholarly output from the division and departmental activities in: cytology and genetics, microbial protection and recovery, mammalian recovery, mammalian genetics and development, pathology and physiology, microbiology, biochemistry, enzymology and photosynthesis, plant biochemistry, general physiology, and biophysics.

This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of the research on circulating-fuel reactors and other ANP research at the Laboratory under its Contract W-7405-eng-26. The report is divided into three major parts: I. Reactor Theory, Component Development, and Construction, II. Materials Research, and III. Shielding Research. The ANP Project is comprised of about 530 technical and scientific personnel engaged in many phases of research directed forward the achievement of nuclear propulsion of aircraft. A considerable portion of this research is performed in support of the work of other organizations participating in the national ANP effort. However, the bulk of the ANP research at ORNL is directed toward the development of a circulating-fuel type of reactor. The design, construction, and operation of the Aircraft Reactor Test (ART), with the cooperation of the Pratt & Whitney Aircraft Division, are the specific objectives of the project. The ART is to be a power plant system that will include a 60-Mv circulating-fuel reflector-moderated reactor and adequate means for heat disposal. Operation of the system will be for the purpose of determining the feasibility, and the problems associated with the design, construction, and operation, of a …

Changes made in the Thorex process flowsheet were a decrease in the extraction column acidity to decrease thorium losses and the addition of a second thorium solvent-extraction cycle to provide the increased decontamination required when thorium irradiated to 2000-4000 g of U233 per ton is processed. Bonded slugs could not be dissolved by the Thorex flowsheet procedure. Various laboratory scale studies on feed preparation, first-cycle variables, and radiation damage to the solvent are reported.

Report issued by the Oak Ridge National Laboratory discussing semiannual progress made by the Physics Division. Descriptions of progress and studies conducted are presented. This report includes tables, and illustrations.

Report issued by the Oak Ridge National Laboratory discussing progress made by the Stable Isotopes Division. Descriptions of of the progress and studies made are presented. This report includes tables, illustrations, and photographs.

Report issued by the Oak Ridge National Laboratory discussing the aging characteristics of the alloy Hastelloy B. Materials, equipment, experimental procedures, and results used to determine the characteristics of the alloy are presented. This report includes tables, illustrations, and photographs.

This semiannual progress report and future reports will be published as two documents to permit a wider distribution of the unclassified material. The report numbers are assigned in sequence so that the two reports will fall together when filed by report number.

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

Report containing experiments conducted at the Oak Ridge National Laboratory's Critical Experiments Facility. These experiments involved "determining the critical parameters of the assembly with varying amounts of neutron absorber in the D20 reflector, measuring the relative neutron flux distribution for various conditions of reflector poison and fissile solution concentration, determining the ratio of the absolute thermal-neutron flux in the center of the assembly to the power in the fissile solution , and determining the effect on reactivity of reducing the hydrogen density in the central region of the assembly" (p. 1).