Abstract: "Creep and creep-rupture tests were made on 25-O aluminum sheet at temperatures of 500 and 550 C. The estimated stresses that will produce 0.5 per cent deformation and rupture in 10,000 hours at 400, 450, 500, and 550 C (data at 400 and 450 C are from BMI-T-29, dated June 9, 1950) are presented."

From abstract: "A method for fabricating 30-in.-long stainless steel - uranium dioxide sheet was developed and the properties of the fabricated sheet were investigated."

The following report focuses on an investigation made to determine if vacuum melting was an absolutely necessary step in the metallurgical process of melting and casting uranium.

This report follows a series of tests run to determine the shielding properties of beryllium oxide, conducted at the Battelle Lid-Tank Shielding Facility. Neutron and gamma penetrations through and behind beryllium oxide were measured.

From introduction: "On February 1, 1956, Batelle was awarded a contract by the Army Reactor Branch (ARB) to select, develop, and test core materials which could be used successfully in conducting a Gas Cooled Reactor Experiment (GCRE). The prime objective of the GCRE would be to evaluate small portable reactor systems for military application...The present report is concerned with the GCRE activities at Batelle during approximately the 7 months' period following the first report of this series, BMI-1133. It is primarily concerned with a detailed evaluation of the reference materials as well as of the impact of one material upon the other."

Abstract: The nonmetallic inclusions in both as-reduced and fabricated dingot uranium have been studied for comparison with those in ingot uranium. Special attention was paid to the hydride for the purpose of determining the amount and distribution in the various types of uranium. The types and distribution of other inclusions were also studied. It was found that the dingot uranium was of a higher quality than ingot uranium and was comparable to as-reduced derby uranium on the basis of over-all inclusion count. The hydrogen content in dingot uranium, however, was found to be appreciably higher than in either ingot or derby uranium.

Report discussing a method of evaluating factors relevant to the creation of sound uranium castings. From abstract: "A mathematical model has been developed to calculate the time-temperature relationships in a cylindrical uranium casting during its solidification. Finite-difference equations are used, and the solution is obtained by use of a digital computer."

Abstract: "Fabrication techniques for making metal-ceramic fuel elements containing 60 to 90 volume per cent of UN or UO2 in a Type 302B stainless steel matrix was investigated. A hot press-forging procedure was most successful for fabricating fuel cores with a density of 90 per cent of theoretical or better. This procedure consisted of sealing the cold-pressed core compacts in stainless steel picture-frame packs, heating to 1900 F, and pressing to a total reduction in thickness of 35 per cent. A pressure of approximately 50 tsi ores used. Specimens produced by this method were evaluated on the basis of their microstructure, modules if rupture, electrical conductivity, and resistance to thermal shock. Microscopic and macroscopic examination showed the presence of a continuous metal skeleton even in specimens containing 90 volume per cent fuel. The modulus of rupture at room temperature varied from 22,500 psi for a specimen cnotaining 63 volume per cent UO2. Both the electrical conductivity and resistance to thermal shock of UO2 were improved by the addition of a small volume of metal. Gas-pressure-bonding techniques appear promising for clodding these cores into composite elements."