A report which covers progress on the testing of the General Engineering and Consulting Laboratory Turbine Pump No. 1 from June 16, 1948, to July 31, 1948.

This report analyzes Parian and Teflon that were exposed to solutions of 1AX, 1AS, and 1AF, ANL June 1, 1948 Flowsheet, under conditions described in the following report.

This report discusses the development of a method for creating leak-proof closures in aluminum sample casings in order to pass a standard bubble-test inspection.

Introduction: A limited test progress on Alloghany-Ludlum type 347 stainless steel plate which failed the Huey test (ASTN A-262-44T) has been completed.

Report detailing the refractive index of solutions of uranyl nitrate, nitric acid and aluminum nitrate. This report builds upon preliminary data and a brief discussion that from a previous report. This report covers more accurate and detailed data that had be accumulated following the initial report.

The current interest in a tube-in-tube type Zircaloy-2 clad UO2 fuel element for use in the power reactors provided the incentive for a study of the dissolution of cladding from an annular space. The objectives of the study were to compare the estimated rate of dissolution in the annuli with rates on fully exposed metal. Because of an interest from the design standpoint, heat balance data from the study are reported.

Very little information and data are available on the various physical properties of Zircaloy tubing, especially the high temperature- high pressure failure aspects. As greater use is being made of the low cross-sectional properties of this material in the design and development of reactor components, it was considered desirable to determine the type of failure that would be experienced under conditions of a localized over-heating. This hot-spot could be caused by "cocked" or warped fuel elements coming in direct contact with the process tube, thereby preventing adequate cooling media at the particular location.

For some time, the need has been recognized for an X-ray diffraction unit applicable to studies concerning the crystallographic characteristics of pile irradiated materials. Except for studies involving specimens of low activity, it has been impossible in the past to investigate materials which emit intense beta and gamma radiations. The exact type and degree of irradiation damage to high activity materials has been largely a matter of theoretical conjecture. The object of this report is to describe an X-ray diffraction spectrometer that can be used to collect crystallographic data from irradiated materials.

Investigation to evaluate some of the designs, techniques, and methods for fabrication of a root pass.

Report regarding Hanford Laboratories' 300 Mwe fast supercritical pressure power reactor. This includes descriptions of the plant and reactor, their operations, safety systems, and plant economics. Appendices begin on page 107.

The purpose of this report is to show the impedance of an approximate equivalent circuit on a complex plan for various constant frequencies and different metals. The equivalent circuit represents a testing coil driven with an AC voltage and a network to represent the impedance of the metal.

Photographic observations of the behavior of uranium dioxide at high temperatures are of great value in designing and evaluating fuel elements. This paper reports the growth of uranium dioxide crystals by vapor deposition during out-of-reactor and in-reactor experiments.

A new package type facility for corrosion decontamination studies has been designed and fabricated. This report gives a description, drawings, and comments on its operation. It has been in operation since December, 1958.

Following is a description of what may be an invention in the art of compacting uranium dioxide (UO2) and other ceramic or cermet nuclear fuel materials for ultimate use as reactor fuel elements. Vibration of ceramic fuel materials at the resonant frequency of the metal encasing material, using high rates of acceleration, produces uniformly compacted high-density fuel elements.

The chemical processing industry relies heavily on the use of rotary pumps to move massive quantities of liquids. The rotating elements of these pumps, generally of the deep-well turbine type, are submerged in the solution being pumped. This singular factor sometimes imposes a severe limitation on the choice bearings because the liquids are frequently corrosive and have poor lubricity. At the Hanford Atomic Products Operation a further complication arises from the effects of radioactivity in the solutions being transferred. Radiation and temperature can and will cause physical damage to many substances, including certain potential bearing materials such as plastics. These factors, coupled with the economics of remote operation and maintenance, have lead to the need for a test program to screen and evaluate potential bearing and journal materials.

Late in 1958 it became apparent that some fuel elements were failing in the Hanford reactors as a result of water entering through the weld. The mode of entry appeared to be first through a void in the weld, then through a non-wet area or a train of voids in the braze, and finally to the uranium core. Defective closures of a similar nature were also typical of many fuel elements which have failed in the autoclaving operation as shown in Figure 1.