The following report calculates how many neutrons are produced by the O-16([alpha]-n) reaction in a thin and uniform polonium oxide layer.

From abstract: "The deposit on the rods is in the form of a brittle uneven tube which is cracked off and subsequently pulverized to a 200-mesh powder. This report is chiefly concerned with methods of consolidating this powder and shaping it into forms required, though it also discusses to some extent other methods of shaping boron or born-rich materials."

Abstract: "This report describes work done to improve the casting characteristics of methyl methacrylete resin under CMR-6-18 authorization. The experimental program was initiated with the objectives of decreasing casting time, bubble formation and shrinkage. It has been found that by use of a common solvent for monomer and polymer concentration in monomer can be attained greater than any previously reported in preparation of a methacrylate casting resign. Incorporation of this greater amount of polymer has produced the desired effects. A bibliography of relevant literature is included to which reference is made in the text."

The bibliography provided investigates the following sources: Chemical Abstracts 1947-1950., Metallurgical Abstracts Vols. 1-18., ASM Review of Metals Literature Vols. 1-6., J. Institute of Metals Vols. 78-80 (No. 7)., Physics Abstracts 1937-1950.

The pressure and temperature cycles developed during the bomb reduction of uranium tetrafluoride by calcium have been determined. Data for the 250, 500, and 1000 gram scale reductions are given, and the apparatus used is described.

A device has been designed which will support small spheres and cylinders in a vacuum system during a plating operation. While supporting the object to be plated, the device automatically shifts the position of the supports so that the coating is evenly distributed. This report describes the mechanism by which this motion is achieved.

Measurements have been at the Pajarito remote control laboratory to determine the effect of change of shape on system reactivity for oralloy cylinders. Systems tested include cylindrical configurations with various height-to-diameter ratios ranging from slabs to rods. Each system reactivity is referred to that of a sphere in the same tamper. Reactivity tests were made on bare (untamped) Oy configurations, as well as on systems In tuballoy tampers 1.12,1.87,and 8.0 thick. The amount of reactivity change associated with a particular cylinder height-to-diameter ratio is feud to be a function of tamper thickness, and is greatest for very thin tampers.

This investigation was begun as a result of a mass spectrometric measurement of two samples of tritium which had been stored for several months in Pyrex glass bulbs using stopcocks. The first of these was originally supposed to be of extremely high isotopic and chemical purity. What was observed at this time was 1.45 H had accumulated, and that tritiated methane, CT4, was also present to the extent of 0.18%. A consistent attempt had been made in this sample to protect the gas from contact with the grease by covering the stopcock with mercury. the second sample was a composite of T2 samples of various degrees of enrichment with an isotopic analysis of 92% T. No protection had been attempted during its storage, and 0.86% CT4 to be present.

Due to laboratory interest in devices capable of production of high current with short rise times in gaseous discharges (plasmas), an experimental machine has been built and tested to obtain data applicable to the design of a high gradient magnetic induction machine. This machine consists of a condenser type energy storage bank air core coupled to a toroid in which the plasma is produced. It has been used to determine circuit parameters and the effect of these parameters on the plasma.