Report presenting testing of a 6.5-inch-diameter ramjet engine with a design Mach number of 2.13 and a short-flame-length combustor. Performance characteristics are provided for a range of Mach numbers and fuel-air ratios. Results regarding thrust, drag tests, static pressure, and combustion efficiencies are provided.

Report presenting results from a tank investigation of a powered dynamic model of the Grumman JRF-5 airplane fitted with a single hydro-ski and extended afterbody. Results indicated that the afterbody extension in place of a tail ski reduced the maximum resistance by 10 percent. Removal of the wing-tip skids gave a further reduction in maximum resistance of 3 percent.

Memorandum presenting tests in the 9-inch supersonic tunnel to investigate the factors that determine the magnitude of the wing-tail interference effects on the static longitudinal stability of supersonic missile configurations with low-aspect-ratio, tandem, cruciform lifting surfaces and to develop a missile configuration with a minimum variation in static margin due to wing-tail interference effects.

Report presenting an investigation of a model of an ejectable pilot seat combination with and without stabilizing fins. The main purpose of the investigation was to determine the static aerodynamic characteristics and effectiveness of various stabilizing fins at a high subsonic Mach number. Results regarding stability and force characteristics for the combinations are provided.

Report presenting an investigation by the wing-flow method to determine the snaking characteristics of a scale partial-model of a research airplane. Additionally, the snaking characteristics of 11 modified configurations of the research-airplane model were determined as well as a model that had a greater fineness ratio.

Report presenting boundary-layer measurements on rocket-powered free-flight models to determine average skin-friction coefficients. The test body, NACA RM-10, was a fin-stabilized parabolic body of revolution of fineness ratio 12.2 with a blunt base to provide space for a rocket jet. Results regarding the skin-friction and boundary-layer profiles and experimental and theoretical curves are provided.

Memorandum presenting lift, drag, and pitching-moment data and some static rolling-moment data are presented for missile configurations having wing-tail-span ratios equal to and less than 1. The configurations include variations in wing and tail plan forms, wing-tail-span ratios, body length, and nose shape.

Report presenting results of a four-plane formation flight with twelve pull-up maneuvers in the form of plots of maximum load factor attained versus airplane position for three combinations of four F2H airplanes. The load factor was generally found to increase toward the end of the formation, and movements of the lead plane that are too sharp might cause excessive loads on the last plane in the formation.

An analysis of the off-design performance of shock-in rotor-type supersonic blading is presented. The over-all losses are assumed divided into two groups;normal-shock losses, and external-wave losses. Throughout the range of relative entrance Mach numbers from 1.35 to starting, the largest losses can be attributed to the normal shock. An improvement in performance would be expected with a reduction of the normal-shock losses by the introduction of external compression waves.

Report presenting the effects of a low-speed wind-tunnel investigation to determine the effects of vertical-fin location and area on the static and rotary lateral stability characteristics of semitailless airplane models. Results regarding straight flow, yawing flow, and rolling flow are provided.

Report presenting an investigation in Langley tank no. 2 to determine the hydrodynamic characteristics of the Consolidated Vultee Skate 7 seaplane with twin hydro-skis suitable for use on water or snow. Results regarding the take-off stability in smooth and rough water, landing stability, spray characteristics, and resistance are provided.

Memorandum presenting a study of the relationship between the static and dynamic properties of heat-resistant alloys at high temperatures. An auxiliary objective is to provide a better basis for evaluating the results from the various types of fatigue machines.

Report presenting an investigation in the free-flight tunnel to determine the dynamic lateral stability and control characteristics of a high-aspect-ratio bomber model with self-supporting, free-floating fuel tanks attached to the wing tips. The results showed that the flight behavior of the configuration could be made satisfactory when sufficient restoring moment was supplied. Results regarding the flight behavior, rolling motions, motions of the bomber and attached tanks, and flight records for different gearing ratios are provided.

Report presenting local coefficients of convective heat transfer as measured from skin temperature along the body of an RM-10 NACA research missile, which consisted of a parabolic body of revolution. Results regarding recovery factors, adiabatic wall temperatures, Nusselts, Prandtl, and Reynolds numbers, and boundary-layer transition are provided.

"Turbine-outlet radial temperature distributions of an XJ34-WE-32 turbojet engine were investigated in the altitude wind tunnel at the NACA Lewis laboratory over a range of pressure altitudes, engine-inlet air temperatures and flight Mach numbers at or near rated engine conditions. From blade stress considerations, the turbine-outlet temperature distribution was considered satisfactory at altitudes up to 25,000 feet at corrected engine speeds corresponding to rated speed (12,500 rpm); however, operation at either higher corrected engine speeds or higher altitudes resulted in an inversion of the turbine temperature distribution that was detrimental to turbine life. Installation of a compressor-outlet mixer greatly improved the turbine radial temperature distribution" (p. 1).