These procedures are intended to be used for the initial operation of the expansion system and serve as a basis for a more complete and revised form to be written once operating experience has been gained. An attempt has been made to offer a logical and systematic presentation to facilitate operation and maintenance of the system by the operating personnel. Thus, the sequence of valve actuations has been presented in matrix and check list form to minimize errors; this also has the advantage of making it easier to adapt certain expansion system procedures to programmed control by a process control computer.

Prior to assembly into the 80" bubble chamber, the expansion system was subjected to a series of tests to check piston dynamics and gain information on the reliability of the various components. Furthermore, the rest provided operating personnel with the opportunity to become familiar with the operation and maintenance of the expansion system. Two separate tests were performed with the apparatus that was located at the north end of the AGS experimental area; one during the week of Oct. 15 and the other during the week of Nov. 12. The system was run with helium gas supplied from AGS compressor room and the piston was operated at room temperature.

From abstract: "The adsorption of ethane, ethylene and acetylene on clean iridium in a field emission microscope has been found to cause characteristic changes in the work function of the iridium surface. Further changes, which are time and temperature dependent, result when such surfaces are heated. Flash filament experiments have shown that the changes in work function upon heating are due to desorption reactions and that the desorbed product consists principally of hydrogen. By assuming a linear relationship between surface coverage and work function, it has been possible to determine the desorption kinetics from the observed rates of work function change at various temperatures. The results are consistent with a mechanism involving stepwise surface dehydrogenation in which a pair of hydrogen atoms is removed from the hydrocarbon molecule in each step, followed by desoption of the adsorbed hydrogen. At very high temperatures the remaining carbon atoms are removed, presumably by evaporation."

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities

This quarterly progress discusses the ongoing work at the Oak Ridge National Laboratory for the quarter ending in March 10, 1952. Topics discussed include reactor theory and design, shielding research, materials research, and includes appendixes with supplemental information.

GE is amending its application of 6/5/57 to construct and operate the Nuclear Test Reactor in order to incorporate changes in procedure and equipment.

Abstract: A control system to provide digital printing and to plot an analog trace on an electric operated IBM model 11C Output Writer is described. The Digital mode of operation translates multidigit numbers through a set of commands to print each digit serially, then presents them to the output writer in a time sequence. The Analog mode of operation converts a d.c. input voltage to a digital number and by tab and space bar commands translates the carriage horizontally a distance proportional to this number.

An experiment now in progress should give some accurate information about the thermal neutron absorption cross section of carbon 12. This report outlines and summarizes this experiment and analyzes it to determine the main sources of error and the probably error in the final result.

Introduction: This report is principally concerned with analysis of measurements taken on the APPR-1 core during the course of the extended Zero Power Experiments (ZPE-2). The bulk of these measurements are reported in APAE No. 21. There are some additional measurements reported in APAE Memo 115. In addition to the analysis of the ZPE-2 data some re-evaluation has been made of a few of the results obtained from the first set of Zero Power Experiments (ZPE-1). The ZPE-1 measurements are reported in APAE No. 8. During the course of analysis work it became apparent that a considerable amount of basic experimental data had been taken on the APPR-1 core. It seemed worthwhile to organize this report in such a fashion that other investigators could make maximum use of this data. It provides excellent opportunity for individuals and groups interested in basic reactor reactor analysis problems to check calculational techniques. An attempt has been made to include all of the fundamental information concerning the material content and geometry of the APPR-1. This material is in included in the Appendices. In addition, cross-section files and group constants have been listed rather extensively in order that other investigators could compare results presented in …

When water is used as a coolant in any heat-producing process, the purity of the cooling water is of considerable importance, both from the standpoint of build-up of deposited solids inside the cooling tubes, and as an indication of corrosion of the tubes or any other materials with which the water comes in contact. The first problem has long been recognized, and is generally solved by pretreatment of the water. Efficient treatment can reduce the total solids content to less than 0.1 ppm, and the concentration of individual elements to the order of 0.01 ppm. If water of this purity is used, the analysis of the input and output stresses can result in some useful information. The input stream analysis, of course, is direct measure of the quality of the original cooling water, and frequent analysis by a reasonably fast method can be used to keep pretreatment under control. But of even greater significance is the difference in the impurity content of input and output streams. In a simple, straight-through system the difference generally will be negligible. If a closed, recirculating system is considered, however, with the coolant water circulating through the process to be cooled and then through a …

Results of eight runs using in-line U photometers in organic and aqueous streams of the Purex Hot Semi-Works are presented. Their operation, both mechanically and electrically, was satisfactory, indicating changes in stream U concentrations over wide ranges.

Abstract. Methods for determination of both uranium and nickel in solutions of these metals are described. Alloys can be dissolved in nitric acid treated with citric acid to complex the uranium, and the nickel precipitated as nicked dimethylglyoxime. The uranium is reduced and titrated with standard ceric sulfate. These methods are for the determination of macro amounts of uranium and nickel with errors on the order of 0.1%.

A simple method of solving for the phase shifts of the pion-proton scattering is presented. The rapid solution afforded can be utilized, as the Ashkin diagrams have been employed, to give starting values to an electronic computer or alternatively to analyze with more ease the variation of the phase shifts as a function of the input data in terms of the coefficients of the angular distributions. A new plot of a function of the total cross section versus the pion energy is introduced. The nearly straight line resulting should help to evaluate the experimental data.

The angular distribution of fission fragments from the neutron-induced fission of several isotopes has been studied. Distributions were observed for thermal neutrons on U233 and U235, Lady Godiva leakage neutrons on U235 and U238, and 14 Mev neutrons on U233, U235, U238, Th232, and Np237. No anisotropy was observed for thermal neutron fission, whereas for Lady Godiva neutrons and 14 Mev neutrons the probability of fission along the axis of the neutron beam was determined to be higher than for fission in the orthogonal direction. Experimental results are given on pages 10 and ll.

A flexible foil data processing program is described. Raw data on foil radioactivity are the basic input information required. Output may consists of relative activities, saturated activities, and/or cadmium ratio and flux spectrum data. A statistical analysis of the data is executed with the direct calculation, and errors estimated for the output data.

The following document describes x-ray diffraction measurements for an approximate crystal structure for the beta phase of metallic uranium.

Abstract: A description is given of the design and operation of a windowed autoclave system employed in the study of corrosion by pressurized hot water. The device has been used to obtain time-lapse motion pictures of the swelling and rupture of deliberately defected zirconium-clad uranium specimens. A method is described by which corrosion rates were calculated from pressure and temperature measurements. A typical set of pictures taken during a test is presented, and corrosion rates are reported for uranium-0, 5, 10, 15, and 20 w/o zirconium alloys subjected subjected to 600 F water.

The following document describes suggestions on the application of the A-48 ion accelerator beam currents to the Sherwood Program.

"Formulas are given to express the general particle trajectory and the equilibrium orbit for a slightly disturbed synchrotron in terms of the amplitude and phase functions for the ideal machine. If these functions are known, orbit computations can be carried out by simple integration procedures. The formalism is expected to be useful especially for considerations such as beam alignment or generation of an external electron beam. Some equations given earlier are repeated for completeness."

Abstract: The boron-carbon equilibrium diagram has been determined by X-ray, metallographic, and thermal analysis of sintered and arc-cast alloys. A single carbide having a range of solubility from approximately 9 to 20 a/o carbon and melting congruently exists in the system. The terminal solubility of carbon in boron is 0.1-0.2a/o. The freezing reaction at the composition and melting temperature of elemental boron; there is a eutectic reaction at 29a/o carbon and 2375 degrees Celcius. No allotropy of boron was observed.

From introduction: "The present investigation of the properties of boron stainless steel is an outgrowth of a project started in 1947. The problem is to replace the present steel used for drop rods in the Hanford piles with a material much less subject to corrosive attack from the humid atmosphere existing at the location of the rods."

Report describing alternative methods for depleting a large turnings inventory in a short period of time.

Introduction: "During the last quarter, members of the Chemical Development Group have been concerned with six major projects. (1) thermal and radiation properties of organic materials as moderators and coolants, (2) thermal and radiation stability of mirconium hydride, (e) reactor accessibility (transport of radioactive materials in cooling systems, ................. There have been, in addition, a number of smaller service projects, mostly of an analytical nature.:

There have been numerous independent suggestions to use high speed shocks to heat deuterium gas to thermonuclear temperature (E. Teller, R.R. Wilson, H. Grad, W. Marshall)², and extensive experimental work in this field is being carried on by, e.g., Kolb³, and S. Janes⁴. Our own work in this field has been directed towards a fundamental understanding of the strong shock process in the limit of no particle collision, to find out if within this limit the ion heating following the passage of the shock is large enough to give rise to a thermonuclear reaction.