The specific thermal load parameter, chi, for xenon flashlamp-pumped Nd:glass gain media is written as a function of neodymium concentration, pump pulse duration, and energy extraction efficiency. The currently available data on radiative and nonradiative decay probabilities of several commercial Nd:glasses are used to calculate and graph specific thermal load parameter values. By factoring these results into performance scaling relationships for zig-zag and disk lasers, specific Nd:glasses can be selected for optimized laser performance.

The quadrature conversion scheme is a method of generating the second harmonic. The scheme, which uses two crystals in series, has several advantages over single-crystal or other two crystal schemes. The most important is that it is capable of high conversion efficiency over a large dynamic range of drive intensity and detuning angle.

We have investigated problems associated with inferring cross sections for neutron reactions on unstable nuclei in the mass-90 region from charged-particle reactions on nearby stable targets. We conclude that effects due to precompound evaporation, isospin, and multiple reaction paths severely limit the circumstances under which charged-particle studies may be directly and easily converted to neutron cross sections of useful accuracy. 4 refs., 2 figs.

This paper investigates the effects of chemistry and heat treatment variation on the 4-K tensile properties of A-286, a candidate sheath material for force-cooled superconductors. Currently, full use of A-286 and similar superalloys is limited by the observed low yield and ultimate tensile strengths in the welded and aged condition. The low strength is shown to be associated with the formation of precipitate-free zones as a result of alloying-element segregation during weld pool solidification. It has been determined that minor modifications of the weld-metal chemistry by the addition of Ti reduce precipitate-free-zone formation, resulting in matching weld-metal and base-plate strengths at 4 K. Furthermore, nucleation of the ..gamma..' hardening phase has been found to be a strong function of temperature and composition. Modified heat-treatment schedules have been determined that are amenable to superconductor fabrication and that resulted in increased weld hardening and improved 4-K tensile properties.

A technique based on discrete energy levels rather than energy level densities is presented for nuclear reaction calculations. The validity of the technique is demonstrated via theoretical and experimental agreement for cross sections, isomer-ratios and gamma-ray strength functions. 50 refs., 7 figs. (WRF)

Creep behavior of Type 304 LN plate and 316 L shielded-metal-arc (SMA)-deposited stainless weld metal was investigated at 4/sup 0/K. Testing was performed at constant load in a creep machine with a cryostat designed for long-term stability. Both transient and steady-state creep were observed during tests lasting over 2000 hours. Steady-state creep rates were much greater than expected from extrapolations of 300-K creep data. Creep rates on the order of 10/sup -10/ s/sup -1/ were observed at stresses around the yield stress for both materials. The stress exponent under these conditions if approx.2.3. Possible creep mechanisms at this temperature and the impact of these results on the design of engineering structures for long-term structural stability at cryogenic temperatures are discussed.

The quadrature conversion scheme is a method of generating the second harmonic. The scheme, which uses two crystals in series, has several advantages over single-crystal or other two crystal schemes. The most important is that it is capable of high conversion efficiency over a large dynamic range of drive intensity and detuning angle. Consider a pair of KDP crystals cut for type-II phase matching. In the quadrature scheme, the optic axes of the crystals are arranged so that the plans containing the direction of the laser beam and their optic axes (the kz planes) are mutually perpendicular. This arrangement has two important properties. First, in type-II phase matching, the incident wave is polarized at 45 deg to the kz plane of the crystal. This, in the quadrature scheme, if the incident wave is correctly polarized for efficient conversion in the first crystal, it is also correctly polarized for efficient conversion in the second crystal. Both crystals can therefore convert efficiently.

The powder metallurgical processing of uranium-6 niobium (U-6Nb) alloy has undergone 3 years of characterization at the Oak Ridge Y-12 Plant. The current structure of the powder metallurgy (P/M) alloy has been described as duplex: a mixture of two or more distinct grain sizes. An experiment was conducted to determine a gamma stabilizing heat treatment (time and temperature combination) to produce a structure consisting of one gamma grain size. Two heat treatments were found to produce an irregular ASTM 4 grain size. Additional P/M U-6Nb alloy material was hot pressed and characterized using the two new heat treatments; however, the resulting microstructures were size ASTM 8. Mechanical properties of the fine-grained P/M material were characterized. Continued evaluation of these results did not determine the cause of the grain refinement.

Hydrothermal systems are often studied by collecting thermal gradient data and temperature-depth curves. These data contain important information about the flow field, the evolution of the hydrothermal system, and the location and nature of the ultimate heat sources. Thermal data are conventionally interpreted by the ''forward'' method; the thermal field is calculated based on selected initial conditions and boundary conditions such as temperature and permeability distributions. If the calculated thermal field matches the data, the chosen conditions are inferred to be possibly correct. Because many sets of initial conditions may produce similar thermal fields, users of the ''forward'' method may inadvertently miss the correct set of initial conditions. Analytical methods for ''inverting'' data allow the determination of all the possible solutions consistent with the definition of the problem. In this paper the authors suggest an approach for inverting thermal data from a hydrothermal system, and compare it to the more conventional approach. The authors illustrate the difference in the methods by comparing their application to the Salton Sea Geothermal Field by Lau (1980a) and Kasameyer, et al. (1984). In this particular example, the inverse method was used to draw conclusions about the age and total rate of fluid flow into …

This report summarizes the results of titanium-gettering tests performed during August and September of 1983. Several current and voltage schedules were evaluated for possible implementation with TMX-U's computer-controlled getter system. The tests were performed using 1/8-inch wire composed of 85% Ti and 15% Ta. Measurements of wire temperature as a function of getter current were made. We performed glow discharge cleaning (GDC) of the vessel with wires in place to determine if GDC had any adverse effect on wire lifetime.

It is shown that level-density expressions cannot adequately represent or substitute for level structure information when making calculations of the Hauser-Feshbach type for cross sections or isomer-ratios for nuclei in the first few MeV above their ground state. It is stated that such discrete level information should include both experimentally confirmed and theoretically predicted levels. The utility of discrete level information to optimize level density calculations, to compute isomer ratios, in deriving dipole strength functions, and in the analysis of primary gamma ray spectra is emphasized, especially for nuclei far from the line of stability. 29 refs., 12 figs., 6 tabs. (DWL)

In this paper we consider periodic structures consisting of rows of spherical conductors. In a plasma linac, these spherical conductors would be formed from liquid droplets on whose surfaces a plasma would be formed. For this paper, the field configurations have been investigated using copper spheres approximately 11 cm diameter and microwave radiation of approximately 30 cm wavelength. No suitable accelerating mode was found for relativistic particles using a single row of spheres, but with two parallel rows of spheres both accelerating and focusing modes were found. In Section II we re-examine the accelerating modes over a grating surface, including a grating of parallel conducting rods. In Section III we discuss the coupling of these structures to incoming radiation. 3 refs., 6 figs.

Many data analysis treatments of positron experiments attempt to resolve two or more positron decay or exist channels which may be open simultaneously. Examples of the need to employ such treatments of the experimental results can be found in the resolution of the constituents of a defect ensemble, or in the analysis of the complex spectra which arise from the interaction of slow positrons at or near the surfaces of solids. Experimental one- and two-dimensional angular correlation of annihilation radiation experiments in Al single crystals have shown that two defect species (mono- and divacancies) can be resolved under suitable conditions. Recent experiments at LLNL indicate that there are a variety of complex exit channels open to positrons interacting at surfaces, and ultimely these decay channels must also be suitably resolved from one another. 6 refs., 4 figs.

Use of a two-stage concentrator with a fresnel lens primary and a nonimaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. Some preliminary ray trace studies have shown that with planar lenses, an increase in angular acceptance for a given geometric concentration to about 2/3 of the maximum theoretical limit can be achieved. To demonstrate this, two preprototype concentrators, each having a geometric concentration of 248:1 for a 0.635cm (0.25 inch) diameter cell, have been designed, built, and tested. Measurements of the angular response show an acceptance of 8[degrees] (full angle) which is drastically better than the 1[degrees]--2[degrees] achievable without a secondary, and is in excellent agreement with the ray trace predictions. For these preprototypes, passive cooling was sufficient to prevent any thermal problems for both the cell and secondary. No problems associated with nouuniform cell illumination were found, as evidenced by the fill factor of 71%--73% measured under concentration. Initial measurements of the system electrical efficiency lie in the range 7.5%--9.9% for a variety of individual cells.

There has been considerable experimental work on same-sign dilepton production in neutrino interactions over the past 10 years. However, the situation is still unclear. Most experiments do have evidence for an excess of candidates but there is a lack of independent statistically significant results. Present experiments at the Tevatron may provide important new information. However the recent revision of older results and the lower rates from recent experiments indicate that real progress will be difficult. Furthermore, the problems encountered with ..pi../K background subtractions argue for a multi-target experiment. Also, given the conflict with present c anti c calculations, a high statistics bubble chamber experiment would be useful to establish the presence/absence of c anti c events at the presently measured production rates. 13 refs., 6 figs., 2 tabs.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether an individual who is both a registered nurse and a licensed vocational nurse is eligible for appointment to the Board of Vocational Nurse Examiners

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether article 6252-11c, V.T.C.S., applies to psychologists who provide diagnostic and restoration services directly to clients of the Texas Rehabilitation Commission

This report discusses the following topics: Alternate gradient synchrotron (Brookhaven); reliability and large storage ring (SLAC); and Fermilab and superconducting tevatron magnets.

Recent thermoluminescence (TL) studies indicate that many kinetic properties are not in accord with the well known 1st and 2nd order TL kinetic equations. For example, the usual equations do not describe: (1) the shape of certain single glow peaks. (2) The shape of glow peaks in many glow curves containing more than one glow peak. (3) The dependence of the peak temperature, the FWHM, the shape, and other properties on the pre-measurement dose. However, the properties of some single glow peaks are precisely described, or closely approximated by, the more general basic equation from which the usual 1st and 2nd order equations are obtained as special cases. Furthermore, glow curves containing more than one glow peak are described by a system of equations that includes interactions between different types of traps and is a straightforward extension of the general one peak equation. This system - called Interactive Kinetics - accounts for most properties, and explains many anomalies, associated with glow curves containing more than one glow peak. It is particularly convenient for computerized analysis procedures. Lastly, it is suggested that other thermally stimulated processes depend on analogous interactions and are describable by similar sets of kinetic equations that are …

Use of a two-stage concentrator with a fresnel lens primary and a nonimaging dielectric totally internally reflecting secondary, has unique advantages for photovoltaic concentration. Some preliminary ray trace studies have shown that with planar lenses, an increase in angular acceptance for a given geometric concentration to about 2/3 of the maximum theoretical limit can be achieved. To demonstrate this, two preprototype concentrators, each having a geometric concentration of 248:1 for a 0.635cm (0.25 inch) diameter cell, have been designed, built, and tested. Measurements of the angular response show an acceptance of 8{degrees} (full angle) which is drastically better than the 1{degrees}--2{degrees} achievable without a secondary, and is in excellent agreement with the ray trace predictions. For these preprototypes, passive cooling was sufficient to prevent any thermal problems for both the cell and secondary. No problems associated with nouuniform cell illumination were found, as evidenced by the fill factor of 71%--73% measured under concentration. Initial measurements of the system electrical efficiency lie in the range 7.5%--9.9% for a variety of individual cells.

Thd D-zero cryostats will contain a number of detector modules. Each module will be made up of plates separated by G-10. To hold the plates together a stainless steel skin has been proposed to cover a whole module. By a series of calculations it was noted that the thin skins would buckle under the force. To prevent the buckling it was proposed to spot weld the skins to some of the internal plates, therefore giving the skins greatly increased strength. This paper gives the results of the test on the proposed spot welds.

None