From summary: "On the basis of the tests described herein, the corrosion characteristics of T-347 welded stainless steel are found not to be affected by the magnetic properties of the welds even though these properties are likely the result of the presence of the ferritic structure."

Report presenting data on freezing point for UNH - NH₄NO₃ - HNO₃ - H₂O Systems. A range of concentrations of systems was used and data is presented.

From introduction: "The present investigation of the properties of boron stainless steel is an outgrowth of a project started in 1947. The problem is to replace the present steel used for drop rods in the Hanford piles with a material much less subject to corrosive attack from the humid atmosphere existing at the location of the rods."

Introduction: "The carrier (pyroelectric) concentration method is commonly used in the spectrographic analysis of plutonium metal. This report describes work which lead to substantial improvements in accuracy, precision and ease with which the analysis is made. Included are data from analyses of plutonium metal by the original and the improved carrier methods, and the cupferron extraction method."

Report presenting a spectrochemical method for analyzing the concentration of iron and silicon in uranium, which requires approximately 1/3 of the time required for the previously used "wet method."

Report describing alternative methods for depleting a large turnings inventory in a short period of time.

Report covering an experiment on a method for determining the crystallographic orientation within uranium rods. From summary: "The crystallographic orientation existing in rolled uranium rods may be determined by comparing the diffraction pattern obtained from an unknown specimen with the diffraction pattern obtained from a sample known to be randomly oriented."

Purpose: "This test was conducted to gain information and experience in the handling of heavy aggregate concrete. The results from this test were to establish procedures for a subsequent program -- "Construction Test of High Density Concrete Shielding.""

This review covers: (a) The continuous countercurrent ion exchangers which have been described in the patent and/or technical literature. (b) Some of the other moving bed processes which are similar in mechanical arrangement to a continuous countercurrent ion exchange and which might have certain features adaptable to an ion exchange unit. (c) The auxiliary mechanical devices which are or may be used in an ion exchange apparatus.

The Hanford Test Pile is a heterogeneous, low power, graphite moderated natural uranium pile. The pile consists of an eighteen foot cube of graphite containing 292 charged channels in a square array with an 8-1/2-inch lattice spacing. This report describes the reactor and the operating procedures used, and presents the latest results of calibrations performed. These calibrations supersede other work which has been done on the Test Pile and contain refinements of most of the early calibrations.

When water is used as a coolant in any heat-producing process, the purity of the cooling water is of considerable importance, both from the standpoint of build-up of deposited solids inside the cooling tubes, and as an indication of corrosion of the tubes or any other materials with which the water comes in contact. The first problem has long been recognized, and is generally solved by pretreatment of the water. Efficient treatment can reduce the total solids content to less than 0.1 ppm, and the concentration of individual elements to the order of 0.01 ppm. If water of this purity is used, the analysis of the input and output stresses can result in some useful information. The input stream analysis, of course, is direct measure of the quality of the original cooling water, and frequent analysis by a reasonably fast method can be used to keep pretreatment under control. But of even greater significance is the difference in the impurity content of input and output streams. In a simple, straight-through system the difference generally will be negligible. If a closed, recirculating system is considered, however, with the coolant water circulating through the process to be cooled and then through a …

A flexible foil data processing program is described. Raw data on foil radioactivity are the basic input information required. Output may consists of relative activities, saturated activities, and/or cadmium ratio and flux spectrum data. A statistical analysis of the data is executed with the direct calculation, and errors estimated for the output data.

Results of eight runs using in-line U photometers in organic and aqueous streams of the Purex Hot Semi-Works are presented. Their operation, both mechanically and electrically, was satisfactory, indicating changes in stream U concentrations over wide ranges.

Flowsheet considerations and information developed for the large (size 2) Purex pulse generator⁽¹⁾ indicated the need for information on the operating characteristics of the small (size 1) Purex pulse generator.

The purpose of this report is to describe the tests performed on the D-12 waste evaporator, to present and evaluate the data obtained during the test, and to make recommendations for the implementation and operation of present and future installations of bayonet tube bundles.

It is the purpose of this report to: 1. Present the results of a study to estimate the range of attainable boiling conditions in the 1706 KER loop design on the bases given in reference (12). 2. Present an outline of the significant modifications and equipment changes necessary to obtain the process conditions desired.

The effect of prolonged heating of cold worked Ziracloy-2 at a temperature of 360°C on the mechanical properties of the material was investigated.

An experiment now in progress should give some accurate information about the thermal neutron absorption cross section of carbon 12. This report outlines and summarizes this experiment and analyzes it to determine the main sources of error and the probably error in the final result.

Supervision and coordination of shutdown work are often made difficult by lack of visual contact between the front face, rear face and control room. Examples of such conditions are: Removal of process tubes, where close co-separation between front and rear elevator crews is required; Locating freshly discharged slugs accidently lodged on discharge face obstructions where radiation levels are high and optical viewing equipment inadequate; Monitoring of the transfer of hot samples from a process tube into a cask, where permissible exposure time is short and oral briefing of personnel who must perform subsequent operations is inadequate.

Radiobiological studies were made to determine effects of radioactive effluents from the Hanford reactors upon the aquatic biota of the Columbia River and to evaluate related hazards. Data from studies completed between September, 1945, and December, 1955 are presented and interpreted. All forms of life were many times more radioactive than the water they inhabited. Some radioisotopes were much more readily accumulated than others in living organisms. Differences in the concentration of certain radioisotopes by various species of organisms and kinds of body tissue are described; and geographical, seasonal and annual fluctuations in the concentration of radioisotopes in organisms are discussed.

In discussion with a number of people at HAPO, KAPL and ANL a hypothesis has been evolved which appears to fit available information concerning irradiation embrittlement of uranium as well as indicate a possible solution to the problem. The purpose of this memorandum is to expound the hypothesis as an aid to those working with the problem. Since it imbodies the ideas of many people, no claim to unique authorship is implied.

The moderator fluid will be injected into the PRTR calandrin through injectors located between the shroud tubes and at the bottom of the calandrin. It is important that the size and arrangement of the injectors be such that complete mixing of the moderator will occur and prevent hot sports from forming in the moderator. Such hot spots could lead to undesired changes in the moderating characteristics due to boiling within the moderator. Also of importance is the requirement that the injector should not produce excessive turbulence at the moderator surface thereby complicating moderator level control. To determine the extent of moderator mixing within the calandrin, experimental studies were made employing a full scale PRTR calandrin mockup.

The small amount of irradiation tenting experience on the plutonium-aluminum type elements planned for the Plutonium Recycle Test Reactor (PRTR) has made such testing of great importance. The high temperature pressurized recirculating water 1706 KER facility is one possible place for conducting investigations of the irradiation behavior of this type fuel element. To obtain the maximum information from the in-reactor testing and to detect possible problems, out-of-reactor test both at room and anticipated operating temperatures must be made. Room temperature pressure drop measurements and high temperatures performance of two prototypical fuel element designs proposed for KER testing are reported in this document.

Several tests are being performed and others being planned to investigate the role of heat transfer in corrosion processes. These tests are measuring both corrosion rates of metals (Zr-2 and X-8001 aluminum) under heat transfer, and the temperature rise associated with the buildup of the corrosion product. A brief description of these tests is given in this report.