From statement of objectives: The purposes of the work described in this report are to provide data useful for designing and operating the dissolver solution clarification equipment to be installed in the Redox production plant.

The introduction of aluminum in hot process water has been studied extensively and numerous reports have been issued on the subject. The conclusions reached have been largely empirical and can only be used to state what is happening under the given conditions existing in the corrosion experiments. It is only with difficulty and a great deal of uncertainty that these empirical results can be used to predict what will occur under a different set of conditions. If the fundamental mechanism of aluminum corrosion in water were known, it is possible that more accurate predictions could be made and that steps might be taken to affect the controlling factors and thus reduce the severity of corrosion. To keep the system as simple as possible one would attempt to study the corrosion mechanism by corroding aluminum in pure water. However, this is undesirable because of the extremely low corrosion rate of aluminum in pure water and the large water supply and treatment facility required to supply sufficient high purity water for circulation about the corrosion samples.

This examination was conducted primarily to determine the extent of corrosion existing between the silver bearing alloy and the type 416 stainless steel nut of K reactor units subjected to service conditions and also to establish irrevocably that metallurgical defects exist in the brazes.

At the present time, high-radioactivity-level wastes at Hanford are neutralized and stored as liquid in underground tanks lined with mild steel. This method of storage is relatively inexpensive and is satisfactory on a short-term basis. However, on a long term basis, liquid storage is less desirable than solid storage because of the greater mobility of the liquid. In addition, storage as aa solid would significantly reduce the volume of waste stored. Consequently, various research and development studies have been undertaken in an attempt to develop a practical waste solidification.