Investigation of the flow through straight-through , elbow, and tee "AN" fittings at negligible approach velocity with approach temperatures up to 1100 degrees F.

Fourier refinement analysis of the uranium parameters in uranium tetrafluoride.

Abstract: Uranium-vanadium ore has long been known in the Trachyte district. Production started in 1913 and has been erratic and intermittent to date. Until recently, practically all production from the Henry Mountains area has come from the Trachyte district.

From introduction: The study of cyclotron-magnet design presented here is directed toward attaining a large ratio of energy in the ion beam with respect to cost. Alternatively, the goal may be regarded as a smaller, more convenient apparatus. These two objectives are not completely incompatible; a design that is more economical than the usual is also smaller. The best design of a cyclotron can be obtained only by considering the problem as a whole. The conditions necessary to maintain an ion beam, the conditions required for the operation of the oscillator, and a host of other problems influence the design of the magnet. It is assumed in this paper that the "other problems" can be satisfactorily solved, if the gap has a suitable geometry and the field a suitable space dependence.

This report deals with the formation of oriented layers of an oxide which form during oxidation without any evident relationship to the parent and underlying metal. It is offered without explanation or proposed mechanism.

Report discussing methods for preparing various protactinium compounds, including protactinium oxides, tetrafluoride, and oxysulfide. Additionally, a method for making the protactinium metal is mentioned.

Report discussing methods for recovering hafnium-free zirconium from irradiated fuel elements. Two methods are discussed: the fluoride method and the Zircex method. Experimental procedures to evaluate these methods and their results are presented.

Report presenting a correction to an age-diffusion equation used by ANP Physics Group, as well as a test calculation using the corrected equation.

"These notes are intended to serve as a summary of the current knowledge of properties of materials. In the future some need may exist for related information on methods od testing, design and fabrication. This issue presents information on thorium with subdivisions..."

Abstract: "This specification covers the cleaning of Zir caloy-2 components of PWR fuel rods and such tools, gauges, or other devices as may be required in subsequent handling, welding and inspection per Fuel Rod Specification AP-292545, Section II-A-4 and Section II-B-3."

A report about anomalous low temperature thermal conductivity of grapnite samples.

This quarterly progress details the ongoing work of the Protective Equipment Evaluation Program at the Oak Ridge National Laboratory. Topics discussed include aerosol generation, penetration studies, particle size measurement, and an appendix with analytical methods.

Abstract: Technical report describing an evaluation of solvents for use in the extraction of uranium from Mallinckrodt type ore feeds.

Technical report evaluating solvents for use in the extraction of uranium from Mallinckrodt type ore feeds. Re-evaluates the Mallinckrodt process in the light of the more recent solvent extraction development that has been carried out at various AEC sites.

Technical report outlining the effect of strain rate on the tensile properties of thorium. It has been found that the yield strength increases slightly with increasing strain rate, and that tensile strength increases but to a less extent. Studies on the fabrication of thorium by extrusion and drawing have continued, as have studies on the extrusion cladding of thorium and uranium with zirconium. [From Summary}

Five isotopes of bismuth occur in nature. Using particle accelerators providing helium ions up to 40 Mev in energy and deuterons up to 20 Mev in energy, it was possible to produce and identify two artificial radioactive isotopes. With the advent of the 184-inch Berkeley syncho-cyclotron and its hundreds of Mev energies, it was possible to form highly neutron-deficient bismuth isotopes extending more than ten mass units below stable Bi(209).

Calculations presented were done to determine what maximum temperature gradients and stresses would be in typical designs of flat thorium plates, 100 mils thick and coolled on both sides by NaK.

The stability of fluorothene (polytrifluorochloroethylene, Kel-F) to gamma radiation has been investigated to estimate the probable life expectancy of fluorothene equipment exposed to Purex process solutions. Samples of fluorothene were exposed to total gamma radiation dosages up to 10 degree R. The results of these tests substantiate the findings reported by Sisman and Bopp in their compilation of data on the affects of radiation on plastics.

Large savings in waste storage space may be realized by lowering the pH at which TBP waste is stored. Additional savings in neutralizing chemicals and operating time would also increase the monetary gain from such a process change. However, before such a change could be made, the corrosive effect of TBP waste at a lower pH on the mild steel waste storage tanks had to be determined.

Temperature calculations have been made to aid in planning a production test for low level irradiation of the thin rectangular uranium wafers. These uranium wafers, under irradiation in the outer fringe sone, are expected to have a maximum temperature which is less than 10 C above the local water temperature.

Report of geological investigations of the Trachyte District of the Henry Mountains in Utah

Discussing the occurrence of uranium deposits in the Pryor-Bighorn Mountains.

Discussing recommendations for diamond drilling in the four aces prospect in White Canyon, Utah.

This memorandum presents the process design for the solvent reast area of the Feed Materials Production Center. The purpose ofthe transmittal is to provide the basis for the detailed mechanical design and layout of this section of the refinery. Drawings, flowsheets, and specifications are included.