"Three wing models were oscillated in yaw about their vertical axes to determine the effects of systematic variations of frequency and amplitude of oscillation on the in-phase and out-of-phase combination lateral stability derivatives resulting from this motion. The tests were made at low speeds for a 60 degree delta wing, a 45 degree swept wing, and an unswept wing; the swept and unswept wings had aspect ratios of 4. The results indicate that large changes in the magnitude of the stability derivatives due to the variation of frequency occur at high angles of attack, particularly for the delta wing" (p. 461).

To reduce manpower burn-out rates resulting from contamination on tools and equipment which are used to remove process tubes, a method for decontaminating, evaluated. The referenced document reported the results of a small scale test designed to remove film from inside the process tube prior to removal of the tube from the reactor. A more conclusive test was also outlined. The purpose of this document is to report the results of the larger scale test.

Report presenting an investigation of the hydrodynamic characteristics of a powered dynamic model of the Martin PBM-5 seaplane equipped with a single Edo hydro-ski. Various hydro-ski positions were investigated. Results regarding aerodynamic and hydrodynamic characteristics, including excess thrust, smooth-water landings, smooth-water take-offs, rough-water take-offs, and spray are provided.

Report presenting a determination of the combustion efficiency of gaseous hydrogen fuel in a ramjet engine in a connected-pipe test facility. Operating conditions simulated a range of Mach numbers and altitudes. Results regarding the effect of inlet parameters and design variables on combustion efficiencies, comparison between methods of determining efficiency, and ignition characteristics are provided.

Abstract: "This specification covers the cleaning of Zir caloy-2 components of PWR fuel rods and such tools, gauges, or other devices as may be required in subsequent handling, welding and inspection per Fuel Rod Specification AP-292545, Section II-A-4 and Section II-B-3."

Report presenting analytical estimates of the thrust, efficiency, drag, and weight of the air-turborocket engine. The effects of changes in the engine components on design and off-design performance are emphasized. Results regarding the performance, effect of design parameters, effect of subsonic cruising Mach number, geometry variations, engine weight estimates, and comparison with turbojet engines are provided.

From page 2: "This article first describes the Bevatron [particle accelerator] and its operation, and then discusses a portion of the research program. The principles of the machine and its early history were given in "The Bevatron," by Lloyd Smith, Scientific American, February 1951."

A sprawling group of buildings on an impressive campus site in the Berkeley hills provides the home of the Radiation Laboratory of the University of California. A succession of large accelerators has been built there, the latest of which is the Bevatron. It is the largest and highest-energy accelerator in operation at the present time. It was built and is operated under contract with the United States Atomic Energy Commission. It is of the type known as a proton synchrotron, of which there are two others in operation, one at the University of Birmingham, England, whose energy is 1 Bev (billion electron volts), and another at the Brookhaven National Laboratory, known as the Cosmotron, which operates at 3 Bev. The Bevatron accelerates protons (stripped nuclei of hydrogen atoms) to an energy of 6.2 Bev. The design was started in 1947 under the direction of Professor E. O. Lawrence, and although it was the product of collaboration of a large group of physicists and engineers, the original conception was due to William Brobeck who also contributed more than any other individual. A working quarter-scale model was built and operated in 1948 and 1949 to verify the correctness of the design concept. …

At the request of F. W. Albaugh of the Engineering Department, the corrosive effect of 1% uranium nitrate hexahydrate solution on aluminum at 100 C has been measured. The corrosion of aluminum in uranium nitrate solution has been shown in laboratory tests to be too severe to permit the use of aluminum for containing hot uranium nitrate solutions. A minimum corrosion penetration rate of 2 mils per day was observed with M-329 aluminum in 1% uranium nitrate hexahydrate in pH 2 aqueous solution at 100 C.

Report presenting an evaluation of data obtained with an automatic constant inlet-pressure control valve designed to facilitate the study of transient engine performance characteristics in the altitude wind tunnel. The engine characteristics obtained by use of the pressure valve were compared with those obtained with a bellmouth inlet operating in simulated free-stream conditions.

Memorandum presenting a study of several typical air induction systems for modern aircraft, which indicates that flow distortions of about-pipe-flow magnitudes can be expected at near-optimum inlet-engine matched air-flow conditions and at small angles of attacks. The distortions may be seriously increased by operation at large angles of attack or yaw, or by supercritical operation of the inlets. Boundary-layer bleed, duct overexpansion and contraction, and freely rotating fans appear promising as devices for reducing distortions with little cost in propulsive thrust.

This paper discusses technical bases, operating standards, and instrumentation systems required to achieve the goal of nuclear safety in operation of high-level reactors. Because of the relatively long neutron lifetime in a thermal reactor and the comparatively modest time rates of reactivity change associated with fission poison and temperature effects, the rod system used for compensating reactivity transients and for maintaining flux distribution control may be operated manually. Manual operation of the reactor and the prediction of pile reactivity statue during outages of course involve factors of human error, normal reaction time, and judgment. It is the aim to specify procedures for the operation such that manual control of the reactor may be adequately maintained at all times within the range of reasonably expected calculational errors and human reaction times. The technical considerations used in developing these standards, including the available monitoring indications are discussed first; then the automatic trip devices which should back up the procedures are also mentioned.

Report presenting an investigation of an exhaust jet and elementary contoured surface at Mach number 1.6 over a range of nozzle pressure ratios from jet-off to a pressure ratio of 9. The effect of the presence of streamline fairings between the surfaces and parabolic afterbody housing the exhaust nozzle on the interaction was also investigated.

Report discussing methods for recovering hafnium-free zirconium from irradiated fuel elements. Two methods are discussed: the fluoride method and the Zircex method. Experimental procedures to evaluate these methods and their results are presented.

Report presenting a determination of the relative reactivities of six fuels with red fuming nitric acid in a 40-pound-thrust rocket engine with rapid liquid-phase mixing. Hydrazine, trimethyl-trithiophosphite, furfuryl alcohol, unsymmetrical dimethylhydrazine, allylamine, and o-toluidine were studied. Results regarding the combustion characteristics of the fuels, fuel ratings, pressure in the mixing cup, effect of chamber diameter, and overall combustion efficiency are provided.

From Summary: "During the course of an aerodynamic loads investigation of a model of the Martin XP6M-1 flying boat in the Langley 16-foot transonic tunnel, longitudinal-aerodynamic-performance information was obtained. Data were obtained at speeds up to and exceeding those anticipated for the seaplane in level flight and included the Mach number range from 0.84. to 1.09. The angle of attack was varied from -2deg to 6deg and the average Reynolds number, based on wing mean aerodynamic chord, was about 3.7 x 10(exp 6)."

This report addresses the progress report of ANP chemistry for April 1956.

This report talks about Chemical Development Status Report for Week Ending June 1, 1956

The introduction of aluminum in hot process water has been studied extensively and numerous reports have been issued on the subject. The conclusions reached have been largely empirical and can only be used to state what is happening under the given conditions existing in the corrosion experiments. It is only with difficulty and a great deal of uncertainty that these empirical results can be used to predict what will occur under a different set of conditions. If the fundamental mechanism of aluminum corrosion in water were known, it is possible that more accurate predictions could be made and that steps might be taken to affect the controlling factors and thus reduce the severity of corrosion. To keep the system as simple as possible one would attempt to study the corrosion mechanism by corroding aluminum in pure water. However, this is undesirable because of the extremely low corrosion rate of aluminum in pure water and the large water supply and treatment facility required to supply sufficient high purity water for circulation about the corrosion samples.

This report discusses the installation of operational charge-discharge equipment on the Hanford reactors has been proposed as a means of eliminating the reactor downtime required for charging and discharging the metal in the reactors. Additional benefits such as the minimization of the effects of slug ruptures, improved reactivity control, and improved metal utilization have become apparent during the investigation of the use of the equipment. Since the minimization of the effects of ruptures has been considered only qualitatively in previous justification documents for operational charge-discharge, the purpose of this document is to evaluate quantitatively the effect of such equipment on operation with a slug rupture limit.

The stability of fluorothene (polytrifluorochloroethylene, Kel-F) to gamma radiation has been investigated to estimate the probable life expectancy of fluorothene equipment exposed to Purex process solutions. Samples of fluorothene were exposed to total gamma radiation dosages up to 10 degree R. The results of these tests substantiate the findings reported by Sisman and Bopp in their compilation of data on the affects of radiation on plastics.

Report discussing testing of a model of the Douglas A4D-1 to investigate the static longitudinal characteristics of wing and fuselage modifications and the static lateral characteristics of the basic model.

The correlation functions and power spectra of the rolling and yawing moments on an airplane wing due to the three components of continuous random turbulence are calculated. The rolling moments to the longitudinal (horizontal) and normal (vertical) components depend on the spanwise distributions of instantaneous gust intensity, which are taken into account by using the inherent properties of symmetry of isotropic turbulence. The results consist of expressions for correlation functions or spectra of the rolling moment in terms of the point correlation functions of the two components of turbulence.

A method of determining enclosure pressure in the event of a reactor rupture is presented and a sample calculation is shown. This method was used in calculating the design pressure of the Dresden Nuclear Power Station enclosure.