A commercial database software package has been used to create several databases and tools that assist and enhance the ability of experimental physicists to analyze data from the Tandem Mirror Experiment-Upgrade (TMX-U) experiment. This software runs on a DEC-20 computer in M-Division's User Service Center at Lawrence Livermore National Laboratory (LLNL), where data can be analyzed offline from the main TMX-U acquisition computers. When combined with interactive data analysis programs, these tools provide the capability to do batch-style processing or interactive data analysis on the computers in the USC or the supercomputers of the National Magnetic Fusion Energy Computer Center (NMFECC) in addition to the normal processing done by the TMX-U acquisition system. One database tool provides highly reduced data for searching and correlation analysis of several diagnostic signals within a single shot or over many shots. A second database tool provides retrieval and storage of unreduced data for use in detailed analysis of one or more diagnostic signals. We will show how these database tools form the core of an evolving offline data analysis environment on the USC computers.

Allowance is made for beta-delayed fission in the calculation of the mass yield of underground thermonuclear explosions. This allowance is made by calculating a correction factor by four different methods. These correction factors are applied to a simple model of product yield and the accuracy and potential usefulness of the results are discussed. 19 refs., 3 figs., 1 tab. (DWL)

Measurements of soft x-ray production by transition radiation have been performed in a series of experiments at the Lawrence Livermore National Laboratory. The results have shown that transition radiation is an intense and predictable source of photons in the soft x-ray energy range. This paper will give a brief review of the general properties of the x-ray distributions generated by these sources. 9 refs., 9 figs.

Two ways of reducing the requirements of the heavy ion driver for inertial confinement fusion (ICF) target implosion are described. Compared to estimates of target gain not using these methods, the target input energy and peak power may be reduced by about a factor of two with the use of the hybrid-implosion concept. Another factor of two reduction in input energy may be obtained with the use of spin-polarized DT fuel in the ICF target.

We present a solid state accelerator concept utilizing particle acceleration along crystal channels by longitudinal electron plasma waves in a metal. Acceleration gradients of order 100 GV/cm are theoretically possible, but channeling radiation limits the maximum attainable energy to 10/sup 5/ TeV for protons. Beam dechanneling due to multiple scattering is substantially reduced by the high acceleration gradient. Plasma wave dissipation and generation in metals are also discussed.

The paper discusses the goals of a monitoring system for a CTB, its functions, the challenges to verification, discrimination techniques, and some recent developments. It is concluded technical, military and political efforts are required to establish and verify test ban treaties which will contribute to stability in the long term. It currently appears there will be a significant number of unidentified events. (ACR)

The purpose of this project was to investigate the capability of blending traditional discrete event simulation techniques with artificial intelligence technology. In order to fully demonstrate the capabilities of such a simulation environment, a difficult class of simulation problem was selected for the project: a military C/sup 3/ (command, control, and communication) simulation. The hardware chosen for the project was a Symbolics LISP machine running an artificial intelligence shell called Knowledge Engineering Environment (KEE). This environment provided a powerful simulation capability in which human decision-making processes could be readily represented.

This report consists of a series of viewgraphs dealing with cost associated with construction of a thermonuclear power plant. (JDH)

None

Radiation-induced biological damage results in formation of a broad spectrum of cytogenetic changes such as translocations, dicentrics, ring chromosomes, and acentric fragments. A battery of analytical cytologic techniques are now emerging that promise to significantly improve the precision and ease with which these radiation induced cytogenetic changes can be quantified. This report summarizes techniques to facilitate analysis of the frequency of occurrence of structural and numerical aberrations in control and irradiated human cells. 14 refs., 2 figs.

Discussion concerning goals or design of the Laboratory Microfusion Facility (LMF) should include an understanding of the neutronics issues involved. We consider such aspects as first wall shielding requirements, safety standards as they will apply to such an Inertial Confinement Fusion (ICF) facility, and the interior chamber environment. The selection of materials for the first wall, neutron moderator and absorber, and gamma ray shielding is discussed. We conclude that water or carbon are the choices for bulk neutron moderation and boron placed just in front of the first wall the choice for neutron absorber. Selection of the in-chamber materials and diagnostic design will greatly affect the relative hazards after a shot. Lead is the high-Z material of choice and plastic expendables for the diagnostics. Although a poor gamma ray attenuator, carbon is the choice for this function since it also compensates for the direct neutron shine effects and does not itself activate. Electronics may need to be hardened to the prompt gamma and neutron dose.

The procedure for installing Superconducting Super Collider (SSC) dipoles in their respective cryostats involves aligning the average direction of their field with the vertical to an accuracy of 0.5 mrad. The equipment developed for carrying on these measurements is described and the measurements performed on the first few prototypes SSC magnets are presented. The field angle as a function of position in these 16.6 m long magnets is a characteristic of the individual magnet with possible feedback information to its manufacturing procedure. A comparison of this vertical alignment characteristic with a magnetic field intensity (by NMR) characteristic for one of the prototypes is also presented. 5 refs., 7 figs.

Increasing numbers of designers are choosing beryllium for fusion reactor blankets because it, among all nonfissile materials, produces the highest number (2.5 neutron in an infinite media) of neutrons per 14-MeV incident neutron. In amounts of about 20 cm of equivalent solid density, it can be used to produce fissile material, to breed all the tritium consumed in ITER from outboard blankets only, and in designs to produce Co-60. The problem is that predictions of neutron multiplication in beryllium are off by some 10 to 20% and appear to be on the high side, which means that better multiplication measurements and numerical methods are needed. The n,2n reactions result in two helium atoms, which cause radiation damage in the form of hardening at low temperatures (<300/degree/C) and swelling at high temperatures (>300/degree/C). The usual way beryllium parts are made is by hot pressing the powder. A lower cost method is to cold press and then sinter. There is no radiation damage data on this form of beryllium. The issues of corrosion, safety relative to the release of the tritium built-up inside beryllium, and recycle of used beryllium are also discussed. 10 figs.

The Tokamak Ignition/Burn Experimental Reactor (TIBER) was pursued in the US as one option for an International Thermonuclear Experimental Reactor (ITER). This concept evolved from earlier work on the Tokamak Fusion Core Experiment (TFCX) to develop a small, ignited tokamak. While the copper-coil versions of TFCX became the short-pulsed, 1.23-m radius, Compact Ignition Tokamak (CIT), the superconducting TIBER with long pulse or steady state and a 2.6-m radius was considered for international collaboration. Recently the design was updated to TIBER II, to accommodate more conservative confinement scaling, double-poloidal divertors for impurity control, steady-state current drive, and nuclear testing. 18 refs., 1 fig.

Previous surveys of experimental level structure in deformed odd-odd nuclei have been updated with recent results for the lanthanide and actinide regions. The relative strengths of the effective neutron-proton interaction derived from these data are compared. The predictive power of a semi-empirical model for level structure in deformed odd-odd nuclei is demonstrated. Comparison is made with recent Hartree-Fock calculations of selected nuclei.

In May of 1988, the long tradition of international cooperation in magnetic fusion energy research culminated in the initiation of design work on the International Thermonuclear Experimental Reactor (ITER). If eventually constructed in the 1990s, ITER would be the world's first magnetic fusion reactor. This paper discusses the background events that led to ITER and the present status of the ITER activity. This paper presents a brief summary of the technical, political, and organizational activities that have led to the creation of the ITER design activity. The ITER activity is now the main focus of international cooperation in magnetic fusion research and one of the largest international cooperative efforts in all of science. 2 refs., 12 figs.

A proposal that the net spin carried by gluons in a polarized proton may be very large compared to 1/2 has recently received considerable theoretical attention. There exists a unique opportunity to test for this dramatic possibility using an existing experimental setup. We urge the consideration of a precision measurement (+-10 b) of sigma/sub L//sup jet/(pp; p0, s) at p0S = 5 GeVS and s = 400 GeVS using the Fermilab polarized beam facility. 10 refs.

Inertial confinement fusion requires temporally shaped pulses to achieve high gain efficiency. Recently, we demonstrated the ability to produce complex temporal pulse shapes at high power at 0.35 microns on the Nova laser system. 2 refs., 2 figs.

Many-electron QED correction is one of the unsolved problems in relativistic atomic structure calculations for many-electron systems. The accuracy of the effective-charged screening approach frequently used in the MCDF model to estimate the many-electron QED corrections is examined. The effects of relativity and configuration interaction are simultaneously important in the treatment of highly-charged ions. These effects can sometimes change the transition rates by orders of magnitude; numerous irregularities present in Auger rates and oscillator strengths along the isoelectronic sequence due to the level crossings. The spin-orbit mixing and Breit interaction are responsible for the decay of most of the high-spin metastable autoionizing states. 29 refs., 8 figs.

The ACPMAPS multipocessor is a highly cost effective, local memory parallel computer with a hypercube or compound hypercube architecture. Communication requires the attention of only the two communicating nodes. The design is aimed at floating point intensive, grid like problems, particularly those with extreme computing requirements. The processing nodes of the system are single board array processors, each with a peak power of 20 Mflops, supported by 8 Mbytes of data and 2 Mbytes of instruction memory. The system currently being assembled has a peak power of 5 Gflops. The nodes are based on the Weitek XL Chip set. The system delivers performance at approximately $300/Mflop. 8 refs., 4 figs.

The behavior of ferrite loads commonly found in induction accelertors has important consequences for the performance of these accelerators. Previous work by the authors on modeling the electromagnetic fields in induction cavities has focussed upon use of a simple, phenomenological model for the process of magnetization reversal in these ferrite loads. In this paper we consider a model for magnetization reversal which is more deeply rooted in theory, and present a simulation of the reversal process based upon this model for an idealized set of boundary conditions. 7 refs., 3 figs.

This draft report was prepared as required by Task No. 2 of the US Department of Energy, Grant No. FG07-89ID12850 Reverse Trade Mission to Acquaint International Representatives with US Power Plant and Drilling Technology'' (mission). As described in the grant proposal, this report covers the reactions of attendees toward US technology, its possible use in their countries, and an evaluation of the mission by the staff leaders. Note this is the draft report of one of two missions carried out under the same contract number. Because of the diversity of the mission subjects and the different attendees at each, a separate report for each mission has been prepared. This draft report has been sent to all mission attendees, specific persons in the US Department of Energy and Los Alamos National Lab., the California Energy Commission (CEC), and various other governmental agencies.

We discuss here the uncertainties in the nuclear input data relevant for calculations of standard and non-standard primordial nucleosynthesis. We show how these uncertainties can affect the predictive power of such calculations, and we identify those key nuclear reactions for which improved experimental data on the associated reaction rates is most needed. Such experimental data can lead to more accurate discriminatory tests between the differing primordial nucleosynthesis scenarios. 34 refs., 3 tabs.

This document contains excerpts from the proceedings of the conference on Technology-based Confidence Building: Energy and the Environment.'' It contains the agenda for the conference and a document on Global Warming and Energy Use;'' a presentation on from Militarism to Environmentalism: a New Focus of US-Soviet Relations;'' a workshop on environmental challenges; a summary address on Science, Technology, and World Affairs;'' an address entitled Energy: the Coin of International Understanding;'' and concluding remarks.