Correspondence issued by the General Accounting Office with an abstract that begins "The National Aeronautics and Space Administration's (NASA) procedures and guidelines require that program and project managers review and apply lessons learned from the past throughout a program's or project's life cycle. Managers must also document and submit any significant lessons learned in a timely manner. NASA's principal mechanism for collecting and sharing lessons learned from programs, projects, and missions agency wide is the Lessons Learned Information System. The goal of the system is to prevent NASA from having to "relearn" the lessons of the past. NASA also shares lessons learned through revisions to its policies and guidance. Furthermore, lessons learned from a mishap or operational event are captured in procedure and process documents. GAO surveyed all of NASA's program and project managers to obtain their perspectives on NASA's mechanisms to ensure that past lessons learned from mission failures are being applied. GAO found fundamental weaknesses in the collection and sharing of lessons learned in NASA by program and project managers as well as in the system. Although some lessons learning does take place, lessons are not routinely identified, collected, or shared by program and project managers. In addition, …

An integrated code system consisting of RELAP5-3D and a multiphase CFD program has been created through the use of a generic semi-implicit coupling algorithm. Unlike previous CFD coupling work, this coupling scheme is numerically stable provided the material Courant limit is not violated in RELAP5-3D or at the coupling locations. The basis for the coupling scheme and details regarding the unique features associated with the application of this technique to a four-field CFD program are presented. Finally, the results of a verification problem are presented. The coupled code system is shown to yield accurate and numerically stable results.

It is necessary that the NIF PEPC LRU Test Stand be modified to accommodate a new experiment. This modification will involve boring two 1/2 inch holes in the Center Loaded Upper Beam of the stand. These holes will allow a small wire to pass through half of the length of one of the long sections of 80/20 part 3030. The holes could adversely effect the load-bearing capabilities of an important structural member of the stand so calculations must be done to assure a minimal risk of part failure.

This paper surveys theory issues associated with inducing convective cells through divertor tile biasing in a tokamak to broaden the scrape-off layer (SOL). The theory is applied to the Mega-Ampere Spherical Tokamak (MAST), where such experiments are planned in the near future. Criteria are presented for achieving strong broadening and for exciting shear-flow turbulence in the SOL; these criteria are shown to be attainable in practice. It is also shown that the magnetic shear present in the vicinity of the X-point is likely to confine the potential perturbations to the divertor region below the X-point, leaving the part of the SOL that is in direct contact with the core plasma intact. The current created by the biasing and the associated heating power are found to be modest.

Continuous melting of phosphate laser glass is now being used for the first time to prepare meter-scale amplifier optics for megajoule lasers. The scale-up to continuous melting from the previous one-at-a-time ''discontinuous'' batch process has allowed for the production of glass at rates more than 20 times faster, 5 times cheaper, and with 2-3 times better optical quality. Almost 8000 slabs of laser glass will be used in high-energy, high-peak-power laser systems that are being designed and built for fusion energy research. The success of this new continuous melting process, which is a result of a six year joint R&D program between government and industry, stems from numerous technical advances which include (1) dehydroxylating the glass to concentrations less than {approx}100 ppm OH; (2) minimizing damage-causing Pt-inclusions; (3) preventing glass fracture; (4) minimizing impurities such as Cu and Fe to <20 ppm; (5) improving forming methods to get high optical homogeneity glass; and (6) developing large aperture quality assurance tools to verify properties of the glass.

A large-scale vadose zone-groundwater bioremediationdemonstration was conducted at the Savannah River Site (SRS) by injectingseveral types of gases (ambient air, methane, and nitrous oxide andtriethyl phosphate mixtures) through a horizontal well in the groundwaterat a 175 ft depth. Simultaneously, soil gas was extracted through aparallel horizontal well in the vadose zone at a 80 ft depth Monitoringrevealed a wide range of spatial and temporal variations ofconcentrations of VOCs, enzymes, and biomass in groundwater and vadosezone monitoring boreholes over the field site. One of the powerful modernapproaches to analyze uncertain and imprecise data chemical data is basedon the use of methods of fuzzy systems modeling. Using fuzzy modeling weanalyzed the spatio-temporal TCE and PCE concentrations and methanotrophdensities in groundwater to assess the effectiveness of differentcampaigns of air stripping and bioremediation, and to determine the fuzzyrelationship between these compounds. Our analysis revealed some detailsabout the processes involved in remediation, which were not identified inthe previous studies of the SRS demonstration. We also identified somefuture directions for using fuzzy systems modeling, such as theevaluation of the mass balance of the vadose zone - groundwater system,and the development of fuzzy-ruled methods for optimization of managingremediation activities, predictions, and risk assessment.

This paper presents the results of 11 after-hours walk-throughs of offices in the San Francisco CA and Washington D.C. areas. The primary purpose of these walk-throughs was to collect data on turn-off rates for various types of office equipment (computers, monitors, printers, fax machines, copiers, and multifunction products). Each piece of equipment observed was recorded and its power status noted (e.g. on, off, low power). Whenever possible, we also recorded whether power management was enabled on the equipment. The floor area audited was recorded as well, which allowed us to calculate equipment densities. We found that only 44 percent of computers, 32 percent of monitors, and 25 percent of printers were turned off at night. Based on our observations we estimate success rates of 56 percent for monitor power management and 96 percent for enabling of power management on printers.

This report presents models for crystallographic texture development for high temperature superconducting oxides processed in the absence of a magnetic field and in the presence of a high magnetic field. The results of the models are confirmed through critical experiments. Processing thick films and tapes of high temperature superconducting oxides under a high magnetic field (5-10T) improves the critical current density exhibited.

As of the end of August, the National Ignition Facility (NIF) is satisfactorily meeting its technical performance, cost and schedule milestones. Hensel Phelps Construction Company (HPCC) turned over the Laser Building to the Beampath Infrastructure System (BIS) Commissioning and Operations team for beneficial occupancy.

Horizontal path laser communications are beginning to provide attractive alternatives for high-speed optical communications, In particular, companies are beginning to sell fiberless alternatives for intranet and sporting event video. These applications are primarily aimed at short distance applications (on the order of 1 km pathlength). There exists a potential need to extend this pathlength to distances much greater than a 1km. For cases of long distance optical propagation, atmospheric turbulence will ultimately limit the maximum achievable data rate. In this paper, we propose a method of improved signal quality through the use of adaptive optics. In particular, we show work in progress toward a high-speed, small footprint Adaptive Optics system for horizontal path laser communications. Such a system relies heavily on recent progress in Micro-Electro-Mechanical Systems (MEMS) deformable mirrors as well as improved communication and computational components. In this paper we detail two Adaptive Optics approaches for improved through-put, the first is the compensated receiver (the traditional Adaptive Optics approach), the second is the compensated transmitter/receiver. The second approach allows for correction of the optical wavefront before transmission from the transmitter and prior to detection at the receiver.

We apply Differential Scanning Calorimetry, DSC, to measure the kinetics of the {beta} {yields} {delta} solid-solid phase transition of Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocinet HMX. Integration of the DSC signal gives a direct measurement of degree of conversion. We apply 1st order kinetics, the Ozawa method, and isoconversional analysis to show that the phase transition is not a simple one-step reaction, but instead is a complex combination of steps. The range of activation energies found in this work, centering around 500 kJ/mol, is higher than previously reported values. We discuss possible reasons for the higher activation energies measured here.

The authors summarize EUVE's contribution to the study of the boundary layer emission of high accretion-rate nonmagnetic cataclysmic variables, especially the dwarf novae SS Cyg, U Gem, VW Hyi, and OY Car in outburst. They discuss the optical and EUV light curves of dwarf nova outbursts, the quasi-coherent oscillations of the EUV flux of SS Cyg, the EUV spectra of dwarf novae, and the future of EUV observations of cataclysmic variables.

This report provides information about the Possible Missile Technology Transfers from U.S. Satellite Export Policy of China. this report discusses security concern,policy changes, and a chronology of major developments since 1988.

In the early months of the 107th Congress, the most prominent air quality issue has been whether state and federal regulations designed to protect air quality have had a negative impact on energy production, and, if so, whether legislation should be enacted to temporarily or permanently relax such regulations. The early discussion focused primarily on California, but with the release of the Administration's energy policy recommendations in mid-May and subsequent congressional action, it has shifted to issues more national in scope.

This report discusses issues debated in the 108th Congress while is considering various proposals to amend the Endangered Species Act of 1973 (ESA). Major issues in recent years have included changing the role of science in decision-making, changing the role of critical habitat, reducing conflicts with Department of Defense activities, incorporating further protection for property owners, and increasing protection of listed species, among others. In addition, many have advocated including significant changes to ESA regulations made during the Clinton Administration in the law itself.

In support of DOE's use of SGML, XML, HTML, and related standards, I have served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During my August 2001 trip, I attended the summer 2001 meeting of SC34/WG3 in Montreal, Canada. I also attended Extreme Markup Languages 2001, a major conference on the use of SGML and XML sponsored by IDEAlliance, and participated in the reorganizational meeting of TopicMaps.org, which is in transition from being an independent group to becoming a Member Section of OASIS (Organization for the Advancement of Structured Information Standards). Supporting standards development allows the Department of Energy/National Nuclear Security Administration (DOE/NNSA) and the Y-12 National Security Complex (Y-12) the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML, XML, and related topics.

New houses in the Sun Lakes at Banning subdivision are designed by Pulte Homes with technical support from the Building Science Consortium as part of the U.S. Department of Energy's Building America Program. These homes save their homeowners money by applying the principles of ''whole-building'' design, which considers the house as a complete system instead of separate components.

Tritium issues will play a central role in the performance and operation of next-step deuterium-tritium (DT) burning plasma tokamaks and the safety aspects associated with tritium will attract intense public scrutiny. The orders-of-magnitude increase in duty cycle and stored energy will be a much larger change than the increase in plasma performance necessary to achieve high fusion gain and ignition. Erosion of plasma-facing components will scale up with the pulse length from being barely measurable on existing machines to centimeter scale. Magnetic Fusion Energy (MFE) devices with carbon plasma-facing components will accumulate tritium by co-deposition with the eroded carbon and this will strongly constrain plasma operations. We report on a novel laser-based method to remove co-deposited tritium from carbon plasma-facing components in tokamaks. A major fraction of the tritium trapped in a co-deposited layer during the deuterium-tritium (DT) campaign on the Tokamak Fusion Test Reactor (TFTR) was released by heating with a scanning laser beam. This technique offers the potential for tritium removal in a next-step DT device without the use of oxidation and the associated deconditioning of the plasma-facing surfaces and expense of processing large quantities of tritium oxide. The operational lifetime of alternative materials such as tungsten has …

Placeholder for an out-of-date document.

A fact sheet that describes the advantages of using ethanol and biodiesel to solve local problems such as smog, ozone, and carbon monoxide.

This report presents some historical data from the radioactive operation of the DWPF melter. Some of the data seem to indication that the melter is displaying symptoms that may be linked to accumulation of noble metal or other conductive material on the melter floor. The complex and often competing effects of waste composition, glass pool temperatures, and operating conditions must also be considered.

None

This CRS Report discusses security concerns, significant congressional and administration action, and a comprehensive chronology pertaining to satellite exports to the PRC. The report discusses issues for U.S. foreign and security policy (including that on China and weapons nonproliferation), such as: What are the benefits and costs of satellite exports to China for U.S. economic and security interests? Should the United States continue, change, or cease the policy in place since the Reagan Administration that has allowed exports of satellites to China (for its launch and – increasingly – for its use)? Etc.

The debate amongst airlines, airports, and government as to who should be blamed for the record flight delays is long-standing. A concomitant debate continues to occur as to solutions to this problem. The two apparent points of agreement are that ultimately there is no single cause of the delays and there is no single solution to the problem. Congress and the Bush Administration are examining a number of non-air traffic control strategies that might be useful in reducing delay both in the short and long term. Most of these efforts focus on expanding airport capacity or using existing capacity better. These include: new runway construction; environmental streamlining to speed up construction; allocation of airport space by use of economic incentives, i.e. peak period pricing; or administrative means, i.e. antitrust immunity to allow airline schedule coordination. All of the potential remedies engender some element of controversy, but the level of controversy varies significantly by suggested remedy. This report provides a brief overview and analysis of remedies currently under consideration by Congress and the Administration.