The authors present results from a systematic perturbative investigation of taste-changing in improved staggered quarks. They show one-loop taste-changing interactions can be removed perturbatively by an effective four-quark term and calculate the necessary coefficients.

The authors extend the Fermilab formalism for heavy quarks to develop an {Omicron}(a{sup 2}) improved relativistic action. They discuss their construction of the action, including the identification of redundant operators and the calculation of the improvement coefficients.

The CDF muon detection system for Run 2 of the Fermilab Tevatron is described. Muon stubs are detected for |{eta}| < 1.5, and are matched to tracks in the central drift chamber at trigger level 1 for |{eta}| < 1.25. Detectors in the |{eta}| < 1 central region, built for previous runs, have been enhanced to survive the higher rate environment and closer bunch spacing (3.5 {micro}sec to 396 nsec) of Run 2. Azimuthal gaps in the central region have been filled in. New detectors have been added to extend the coverage from |{eta}| < 1 to |{eta}| < 1.5, consisting of four layers of drift chambers covered with matching scintillators for triggering. The Level 1 Extremely Fast Tracker supplies matching tracks with measured p{sub T} for the muon trigger. The system has been in operation for over 18 months. Operating experience and reconstructed data are presented.

This Technical Memorandum (TM) summarizes the accelerator and experiment operations for the period FY 2001 through FY 2003. The plan is to have an annual TM to gather such information in one place. In this case, the information concerns the startup of Run II at the Tevatron Collider and the beginning of the MiniBooNE neutrino experiment. While the focus is on the FY 2003 efforts, this document includes summaries of the earlier years where available for completeness.

OAK-135 Development and validation of constitutive models for polycrystalline materials subjected to high strain rate loading over a range of temperatures are needed to predict the response of engineering materials to in-service type conditions (foreign object damage, high-strain rate forging, high-speed sheet forming, deformation behavior during forming, response to extreme conditions, etc.). To account accurately for the complex effects that can occur during extreme and variable loading conditions, requires significant and detailed computational and modeling efforts. These efforts must be closely coupled with precise and targeted experimental measurements that not only verify the predictions of the models, but also provide input about the fundamental processes responsible for the macroscopic response. Achieving this coupling between modeling and experimentation is the guiding principle of this program. Specifically, this program seeks to bridge the length scale between discrete dislocation interactions with grain boundaries and continuum models for polycrystalline plasticity. Achieving this goal requires incorporating these complex dislocation-interface interactions into the well-defined behavior of single crystals. Despite the widespread study of metal plasticity, this aspect is not well understood for simple loading conditions, let alone extreme ones. Our experimental approach includes determining the high-strain rate response as a function of strain and temperature with …

This paper discusses the successful remote visual inspection of a contaminated air exhaust tunnel running beneath the Savannah River Site's H-Canyon nuclear material separations facility. The air exhaust tunnel has been in operation since the 1950's, and the portion of the tunnel inspected has not been seen or accessed since startup. Numerous challenges were overcome in the deployment of the vehicle, including an initial 10-ft drop, travelling a long distance through harsh environmental conditions, surviving and recovering from a second vertical drop, turning 90 degrees, and subsequently travelling further. Video of the entire inspection was transmitted back to a control station, and the vehicle was abandoned in place for possible future use.

The principal research effort for Year 1 of the project is data compilation and the determination of the tectonic and depositional histories of the North Louisiana Salt Basin. In the first three (3) to six (6) months of Year 1, the research focus is on data compilation and the remainder of the year the emphasis is on the tectonic and depositional histories of the basin. No major problems have been encountered to date, and the project is on schedule. The principal objectives of the project are to develop through basin analysis and modeling the concept that petroleum systems acting in a basin can be identified through basin modeling and to demonstrate that the information and analysis resulting from characterizing and modeling of these petroleum systems in the North Louisiana Salt Basin and the Mississippi Interior Salt Basin can be used in providing a more reliable and advanced approach for targeting stratigraphic traps and specific reservoir facies within a geologic system and in providing a refined assessment of undiscovered and underdeveloped reservoirs and associated oil and gas resources.

This presentation discusses the economic future of nuclear power.

Fracture mechanics methodologies for flaw stability analysis of a storage tank were compared in terms of the maximum stable through-wall flaw sizes or ''instability lengths.'' The comparison was made at a full range of stress loading at a specific set of mechanical properties of A285 carbon steel and with the actual tank configuration. The two general methodologies, the J-integral-tearing modulus (J-T) and the failure assessment diagram (FAD), and their specific estimation schemes were evaluated. A finite element analysis of a flawed tank was also performed for validating the J estimation scheme with curvature correction and for constructing the finite element-based FAD. The calculated instability crack lengths show that the J-T methodology that uses an estimated scheme, and the material-specific FAD, most closely approximate the result calculated with finite element analysis for the stress range that bounds those expected at the highest fill levels in the storage tanks. The results from the other FAD methods show instability lengths less than the J-T results over this range.

The new Isotope Production Facility (IPF) at Los Alamos National Laboratory has been commissioned during the spring of 2004. Commissioning activities focused on the establishment of a radionuclide database, the review and approval of two specific target stack designs, and four trial irradiation runs with subsequent chemical processing and data analyses. This paper highlights some aspects of the facility and the targetry of the two approved target stacks used during the commissioning process.

The ''demo enclosure'' is a small box constructed at ARL/PSU to simulate the basic characteristics of an equipment enclosure, but without the complexity of an actual enclosure. In the general case, an equipment enclosure can house a variety of electrical equipment, including transformers, card racks, etc., usually mounted on shelves. They are primarily interested in investigating the best way to mount the shelves in the enclosure to mitigate sound radiation due to the excitation from the electrical equipment. A secondary goal is to assess methods for modeling the structural properties of interconnected shelves and cabinets along with the electrical equipment. In this report, they will concentrate on the extensive experimental measurements made during the investigation.

On October 30-31, 2003 over 60 scientists gathered at ANL to discuss potential science that could be done with a fully operational user facility dedicated to delivering widely tunable, short pulse, high peak power vacuum ultraviolet light. The charge given to the workshop by J. Murray Gibson, ANL Associate Lab Director for the Advanced Photon Source, included the following two points: (1) What are the scientifically important experiments that can only be done with the proposed ALFF facility? (2) Are the combined ALFF characteristics of pulse energy, tunability, pulse length, and coherence sufficiently unique to justify establishing a user facility at this time? To fulfill this two-point charge, special emphasis was placed by the workshop committee on two goals. First, scientists were invited who work in areas where the lack of powerful, tunable VUV is a limitation to speak about their current research and to speculate on the science that would be uniquely possible with the ALFF. Second, while many of the same scientists have expertise in using lasers and other VUV sources, it was considered crucial to invite scientists explicitly working on the development of tabletop VUV systems. In addition to addressing the second charge question, the purpose of …

Objectives of this project under this cooperative agreement are to evaluate the energy efficiency and performance enhancements of a pulsed thermal expansion valve (TXV), its cost and reliability. This device could replace the currently used devices, a capillary tube and modulating TXVs, in household and commercial refrigeration and air conditioners. Determination of the economics and first cost of such devices, once performance enhancements have been defined, shall be performed and reported. This work shall be accomplished with the support of commercial partners in the HVAC and R industries. The reliability of the pulsed TXV shall also be determined, which is an important factor for its commercial success.

We investigate performance characteristics for the LU factorization of large matrices with various sparsity patterns. We consider supernodal right-looking parallel factorization on a bi-dimensional grid of processors, making use of static pivoting. We develop a performance model and we validate it using the implementation in SuperLU-DIST, the real matrices and the IBM Power3 machine at NERSC. We use this model to obtain performance bounds on parallel computers, to perform scalability analysis and to identify performance bottlenecks. We also discuss the role of load balance and data distribution in this approach.

The radiation effects on the physical characteristic of the sewage sludge were studied in order to obtain information which will be used for study on the enhancement of the sludge's dewaterability. Water contents, capillary suction time, zeta potential, irradiation dose, sludge acidity, total solid concentration, sludge particle size and microbiology before and after irradiation were investigated. Irradiation gave an effect on physical characteristics sludge. Water content in sludge cake could be reduced by irradiation at the dose of 10kGy.

None

This presentation is a part of the panel discussion on isotope production in light of increasing demand.

The purpose of this work is to settle a laboratory for Iridium -192 sources production, that is, to determine a wire activation method and to build a hot cell for the wires manipulation, quality control and packaging. The paper relates, mainly, the wire activation method and its quality control. The wire activation is carried out in our nuclear reactor, IEA- R1m.

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional …

There is considerable impetus for identification of aqueous OM catalysts as water is the ultimate ''green'' solvent. In collaboration with researchers at Ames Lab, we investigated effective fragment and Monte Carlo techniques for aqueous-phase hydroformylation (HyF). The Rh of the HyF catalyst is weakly aquated, in contrast to the hydride of the Rh-H bond. As the insertion of the olefin C=C into Rh-H determines the linear-to-branched aldehyde ratio, it is reasonable to infer that solvent plays an important role in regiochemistry. Studies on aqueous-phase organometallic catalysis were complemented in studies of the gas-phase reaction. A Rh-carbonyl-phosphine catalyst was investigated. Two of the most important implications of this research include (a) pseudorotation among five-coordinate intermediates is significant in HyF, and (b) CO insertion is the rate-determining step. The latter is in contrast to experimental deductions, highlighting the need for more accurate modeling. To this end, we undertook studies of (a) experimentally relevant PR{sub 3} co-ligands (PMe{sub 3}, PPh{sub 3}, P(p-PhSO{sub 3{sup -}}){sub 3}, etc.), and (b) HyF of propene. For the propylene research, simulations indicated that the linear: branched aldehyde ratio (linear is more desirable) is determined by thermodynamic discrimination of two distinct pathways. Other projects include a theory-experiment study of …

China faces a significant challenge in the years ahead to continue to provide essential materials and products for a rapidly-growing economy while addressing pressing environmental concerns. Energy is a fundamental element of the national economy and the conditions of its use have a direct impact on China's ability to reach its sustainable development goals. China's industrial sector, which accounts for over 70 percent of the nation's total energy consumption each year, provides materials such as steel and cement that build the nation's roads, bridges, homes, offices and other buildings. Industrial products include bicycles, cars, buses, trains, ships, office equipment, appliances, furniture, packaging, pharmaceuticals, and many other components of everyday life in an increasingly modern society. This vital production of materials and products, however, comes with considerable problems. China's industrial sector is heavily dependent on the country's abundant, yet polluting, coal resources. Industrial production locally pollutes the air with emissions of particulates, carbon monoxide, sulfur dioxide, and nitrogen oxides, uses scarce water and oil resources, emits greenhouse gases contributing to the warming global atmosphere, and often produces hazardous and polluting wastes. Fostering innovative approaches to reduce the use of polluting energy resources and to diminish pollution from industrial production that are …

The power point presentation for the Natural Gas Technologies II Conference held on February 8-11, 2004 in Phoenix AZ, published the presentations made at the conference, therefore required all presenters to submit their presentation prior to November 2003. However in the remainder of year, significant new test data became available which were incorporated in the actual presentation made at the Natural Gas Technologies II Conference. The 6th progress report presents the updated actual slide show used during the paper presentation by Richard Guiler.

Typically, large scientific datasets (order of terabytes) are generated at large computational centers, and stored on mass storage systems. However, large subsets of the data need to be moved to facilities available to application scientists for analysis. File replication of thousands of files is a tedious, error prone, but extremely important task in scientific applications. The automation of the file replication task requires automatic space acquisition and reuse, and monitoring the progress of staging thousands of files from the source mass storage system, transferring them over the network, archiving them at the target mass storage system or disk systems, and recovering from transient system failures. We have developed a robust replication system, called DataMover, which is now in regular use in High-Energy-Physics and Climate modeling experiments. Only a single command is necessary to request multi-file replication or the replication of an entire directory. A web-based tool was developed to dynamically monitor the progress of the multi-file replication process.

This presentation is a part of the panel discussion on isotope production in light of increasing demand.