Patent for a new and improved cork extractor. This design consists, "with the side-slitted cork, of the double-wire extractor having loop ends engaging the slits of the cork and extending beyond the same and the securing-wire passing through said loop ends and around the shoulder of the bottle-neck" (lines 47-52).

Patent for a new and improved car-window lock. This design consists in "the sliding crank-shaped spring-actuated bolt for locking the window, in combination with the oscillating cam acting upon the bolt to unlock it, said cam having a lateral arm with a spring-guide hinged thereto, a spring surrounding the guide, and means for swinging the cam and thus retracting the bolt" (lines 21-27).

Patent for "improvement in machines for building and rerolling wire fences" (lines 4-6), with instructions and illustrations.

Patent for a new and improved laundry boiler. This design consists in "a partition at its lower end slightly above the bottom formed with a screw-threaded neck at its center, a perforated tube fitting with its lower end upon the neck and having its upper end closed, and a number of perforated triangular tubes upon the side of the boiler provided with stoppers at their upper ends and extending from the partition in the lower end of the boiler, and a rack consisting of rings connected at their upper edges by cross-pieces" (lines 76-86).

Patent for a new and improved stalk cutter for plows. This design "consist[s] of the beam having rearwardly, downwardly, and forwardly curved standard, the arrow-point, having the stem or shank formed entire or open at its bottom, rear side, and top to receive the said standard, and the diamond-shaped cutter consisting of two wings inclined upwardly from their front to rear edges, and curved inwardly at their outer ends from their cutting-edges to their back edges" (lines 72-82).

Patent for "a revolving target of improved and simplified construction" (lines 15-17), with instructions and illustrations.

Patent for a new and improved planter. This design consists in "the frame, the wheels, the axle provided with the fingers, and the spout attached to the under side of the frame, of the hopper having a slot in its bottom decreasing in width from its forward to its rear end, plates, adjustably secured to the bottom of the hopper, the vertical shaft journaled in the hopper, and the horizontal arms on the said shaft" (lines 92-100).