A self-contained developmental or the formation of the problem of inelastic neutron scattering by crystals is presented. although nearly all of the methods and results used in the present discussion have appeared in a variety of previously published papers, additional mathematical details are given here which have been found by thee authors to aid in understanding the final results.

As a result of unreported information, it was suspected by some people that a change in dimension was experienced by 2S Aluminum due to a sudden change in neutron flux impinging on it. This was thought to be of the order of 500 microinches per inch in magnitude. Such an effect, if present, could help explain some of the creep phenomena reported lately (i.e. change in creep rate due to cyclotron bombardment.)

This document reports the circumstances surrounding the failure of sheathed thermocouples during a test being conducted in the KAPL-120 Loop. The report is prepared to provide a record of these events and to acquaint those who use these thermocouples for testing of other applications with the difficulties that are sometimes encountered.

Progress report of the Oak Ridge National Laboratory Analytical Chemistry Division providing updates on various projects, experiments, and other work in ionic analyses, analytical instrumentation, radiochemical analyses, activation analyses, spectrochemical analyses, inorganic preparations, optical and electron microscopy.

This report presents a summary of certain physical properties that have been determined experimentally on the fluoride mixture that have been formulated at ORNL (Rers. 1, 2). These properties include the density, enthalpy, heat capacity, heat of fusion, thermal conductivity, viscosity, Prandtl number, electrical conductivity and surface tension. In addition to the experimental data, values have been predicted for the heat capacity and density of the other mixtures from the correlations of these properties. Estimates of the viscosity have also been made for a number of the mixtures on which no experimental data were available.

Although the corrosion of resistance of Zircaloy--2 clad fuel elements in high temperature water is excellent, some concern has been expressed in regard to the resistance against fretting corrosion. Since this form of corrosion can proceed quite rapidly it could induce fuel element failure through penetration of the cladding. Fretting corrosion if it occurred, would take place either where the fuel element contacted the process tube or where portions of the fuel element contacted each other, e. g. wire-wrapping around a cluster of cylindrical fuel rods. This form of corrosion is defined as corrosion occurring at contact areas and as such, fretting of Zircaloy-2 could take place in many reactor concepts. This report details the results of testing performed to induce fretting corrosion of Zircaloy-2 and the direction of the future tests.

It is the purpose of this report to present a quantitative picture of the overall waste problems at the presently operating major A.E.C. sites. Presented herewith are data on the volumes and radioactive concentrations of the wastes handled and effluents discharged, available tankage and processes flow sheets from each site.

As there is no accurate measurements of the energy distribution of neutrons emerging from large uranium blocks, it becomes of importance to see how much information of this kind can be derived from the slowing down distribution of the neutrons in a water tank.

Technical report. From Abstract : "Reaction of NbBr5 and niobium metal in a sealed tube under a temperature gradient from 410° to 350° gave NbBr4 in good yields. However, an increase in the higher temperature from 410° to 450° was sufficient to eliminate NbBr4 as a product and cause deposition of a lower bromide."

Technical report. From Abstract : "The necessary conditions for preparation of TaBr4 and TaI4 by reduction of the pentahalides with tantalum or aluminum metal in a sealed tube under a controlled temperature gradient have been demonstrated."

Secondary charge effects from a 10 kilovolt proton beam and their effect upon beam current measurement are investigated. A collector is designed for beam current metering of a 60 kilovolt proton beam by means of charge measurement and energy measurement.

Abstract: An analysis of SM-1 Core II and SM-1A Core I zero power experiments was made by comparing these cores to each other and to AM-1 Core I on the basis of critical bank positions, bank calibrations and available chemical analyses of the fuel plate compositions. The effects of replacing boron absorbers by europium absorbers upon rod worth and stuck rod conditions were studied. Comparisons of measured and calculated power distributions were made. It was concluded that both SM-1 Core II and SM-1A Core I contain nearly identical B-10 loading of 17.79 grams, compared to the best estimate of 15.75 grams for SM-1 Core I. The available data indicates that all three cores possess similar nuclear characteristics.

From abstract: "Using the method of induced radioactivity, the capture cross section of Pb[^]208 for C neutrons is found to be .00045 ± .00015 x 10[^]-24 cm[^]2. This is definitely lower than the value of .001 x 10[^]-24 reported by Maurer and Ramm."

This report provides an overview of the creation of the Liquid Metal Fuel Reactor Experiment program. It furthers the work by constructing a single loop to test all the components required for the 16 loop reactor. This utility loop was also constructed to provide a facility for testing various components such as valves and flow meters.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities

From abstract: "Resistivities of solid solution alloys in the systems Gd-Lu, Tb-Lu, Gd-Er, and Y-Lu were measured from 4.2-320°K to determine the behavior of the resistivity in alloy systems with magnetic phenomena arising from localized magnetic moments. A large contribution to the residual resistivity is caused by the random distribution of these localized moments through the lattice. An analysis of the lattice resistivity of the metals shows large variations across the heavy rare-earth series which are possibly correlated with the change of c/a ratio of the metals and the attendent changes in the Fermi surface geometry."

From introduction: "The concluding remarks of the report on the electron diffraction study of UF6 suggest two alternate explanations for the apparent discrepancy between the structure proposed for this compound as deduced from X-ray diffraction work on single crystals and from the electron diffraction investigation of the vapor. The second explanation is based on the premise that the difference may be due to essentially unlike methods of treating the diffraction data. In this report we shall analyze X-ray powder photographs following a scheme parallel to that used in the analysis of the electron diffraction data, to check whether this particular explanation is tenable."

Human iron metabolism has been extensively studied in the past twenty-five years with the radioisotopes iron⁵⁵ and iron⁵⁹. Before the availability of the whole body counter, however, iron absorption studies were performed by the indirect methods of fecal assay of unabsorbed radioiron, and estimation of red cell incorporation of absorbed tracer. The few long-term excretion studies performed required numerous assumptions, since human iron excretion was less well understood. Whole body counting provides a simple and accurate method of measuring the total body retention of administrative tracer iron⁵⁹, thus making absorption and subsequent excretion determinations possible with a single radioiron study. The energetic gamma emissions of iron⁵⁹ permit ready external detection with small quantities of isotope, Normal radioiron distribution is uniform throughout the circulating red cell mass and thus minimize geometry influences on the counting efficiency, 0nly the 45.1 day half-life of iron⁵⁹ limits long term iron turnover studies. Measurements of iron⁵⁹ absorption and long-term body turnover have been under way at Brookhaven National Laboratory for over two years. The present paper outlines some of the results of these studies, and discusses some implications of the method.

The efficiency of multiple traversal targets is defined as the probability that a proton dies by making a nuclear collision in the target rather than by hitting the limit of the synchrotron aperture. The efficiencies of Be, Al, Cu, and Pb targets are shown for 15 and 30-Bev protons in the Brooknaven AGS. Beryllium was found to be the most efficient. (M.C.G.)

An abrasive cutoff machine design, based upon a previous model, (1) was undertaken to provide for the sampling of radioactive material. the design objective was; first, to provide samples for metallographic examination, second, to provide samples for physical and mechanical property testing, and, third, to meet the following design requirements: 1. Remote operation. 2. Airborne contamination control. 3. Radioactive waste collection. 4. Remote maintenance.

A method for determining zirconium in plutonium-zirconium alloys was required as part of an investigation of alloys containing fissionable material, with possible use in nuclear reactors. Alloys of these two elements were brought into solution with a bisulfate fusion and the zirconium was separated by precipitation with p-bromomandelic acid. Determinations were completed by weighing the zirconium oxide obtained after ignition of the precipitate at 925 degree C. The precision of this recommended procedure was estimated in terms of the standard deviation for quadruplicate determinations, made with weight aliquots from dissolved alloy samples. The range for the standard deviation was 0.5 to 1.7 parts per thousand for samples from which aliquots each containing 9 to 15 mg of zirconium were selected. The complete recovery of zirconium from solutions of pure zirconyl chloride and plutonium trichloride was shown by the 95 percent confidence limits of 99.9 +- 0.3 percent for the average of four determinations, observed with samples containing 5 to12 mg of zirconium in the presence of 10 to 20 mg of plutonium. It was found the Mo, La, PU(III), and K2Cr2O7 do not interfere with zirconium determinations made according to the recommended procedures, but Pu(IV) does interfere slightly. It was …

The opacity and thermodynamic properties of air at temperatures above 10 e.v. and densities below normal have been calculated under the guidance of H. Mayer in accordance with the prescription given in AECD 1870 (LA-647). Corresponding to given densities and temperatures, self-consistent distributions of electrons in bound states and their eigen energies are determined. With this information we compute the thermodynamic properties of air and the frequency-dependent absorption coefficients. Finally the opacity--a weighted average of the latter--is found

The erection of a concrete biological shield at Hanford, Washington presented several unique construction problems. This shield encloses the radioactive core of a reactor and is designed to protect operating personnel from the harmful effects of pile neutrons and associated gamma radiation. Permanent steel forms were erected to close tolerance around the reactor and filled with high density concrete by means of prepacked method. Prefabricated sections of the steel forms, or crates, were five to eight feet deep and weighed up to 18 tons each. During erection, the process holes through successive crates were kept within 0.012 in. of their nominal distance. The left side, top shield, and right side of this biological shield were constructed integrally to form a rigid frame. The front and rear crates, which contain numerous process holes, were keyed into the side and top shields so as to permit relative expansions of shield components and to provide for their lateral support. These massive steel and concrete walls provide considerable resistance to blast and earthquake forces, support numerous process facilities, contain pile gas, as well as protect personnel from nuclear radiation.

A number of the questions which have been posed to us in the subject references are commented upon below. These have been reviewed by personanel of the Research and Engineering Operation and the Facilities Engineering Operation, Chemical Processing Department, and of the Chemical Research and Development Operation, Hanford Laboratories Operation. Particular acknowledment is given G. J Alkire, J. P. Duckworth, J. B. Fecht, R. G. Geier, E. R. Irish, H. M. Jones, G. C. Oberg, A. M. Platt, W. H. Reas, W. C. Schmidt, R. J. Sloat, W. H. Swift, M. T. Walling and L. L. Zahn of these organizations for assistance given assembling this information.