"Test results indicated that graphite is not suitable for seal face material. A program to evaluate various materials and seal face geometries was initiated. A seal run using nucerite-bearium combination was carried on for six hours."

This is a report of work completed during the period October 1, 1961, to December 31, 1961. The Program fuel element was completed and assembled. After extensive analysis, it was concluded that the fuel was satisfactory for use in the Program.

Introduction: "This report presents physical property analyses for 28 additional samples and is a supplement to Geological Survey Technical Letter: Area-12-1, which gave a brief summary of the geology, descriptive data on the tunnel, and X-ray, chemical, semiquantitative spectrographic analyses, and some physical properties determinations of samples collected in the U12g.01 tunnel."

The ANGIE, one of a series of reactor neutronic programs for an IBM 709 or 7090 data processing system, solves the time-dependent, multi-group, neutron diffusion equation for 1 to 26 energy groups applied to a rectangular mesh superimposed on either an x-y or an r-z plane.

Human iron metabolism has been extensively studied in the past twenty-five years with the radioisotopes iron⁵⁵ and iron⁵⁹. Before the availability of the whole body counter, however, iron absorption studies were performed by the indirect methods of fecal assay of unabsorbed radioiron, and estimation of red cell incorporation of absorbed tracer. The few long-term excretion studies performed required numerous assumptions, since human iron excretion was less well understood. Whole body counting provides a simple and accurate method of measuring the total body retention of administrative tracer iron⁵⁹, thus making absorption and subsequent excretion determinations possible with a single radioiron study. The energetic gamma emissions of iron⁵⁹ permit ready external detection with small quantities of isotope, Normal radioiron distribution is uniform throughout the circulating red cell mass and thus minimize geometry influences on the counting efficiency, 0nly the 45.1 day half-life of iron⁵⁹ limits long term iron turnover studies. Measurements of iron⁵⁹ absorption and long-term body turnover have been under way at Brookhaven National Laboratory for over two years. The present paper outlines some of the results of these studies, and discusses some implications of the method.

The efficiency of multiple traversal targets is defined as the probability that a proton dies by making a nuclear collision in the target rather than by hitting the limit of the synchrotron aperture. The efficiencies of Be, Al, Cu, and Pb targets are shown for 15 and 30-Bev protons in the Brooknaven AGS. Beryllium was found to be the most efficient. (M.C.G.)

Abstract. Results are presented of a theoretical study to calculate the [alpha]/[beta] ratio of filter-collected natural airborne radioactivity. The detection of airborne plutonium contamination by noting increases in this [alpha]/[beta] ratio is discussed. A modification of this approach which provides a more uniform response to alpha airborne contamination is described.

The object of this report is to acquaint the operator with the operational and technical aspects of the beam current integrator as well as the theory of the system operation. The design and operation of a beam current integrator are described, and the theory of operation is discussed. The instrument has two channels. The console channel is designed to measure the accumulation of charge received by a target during a period of a day no matter what the range used in the experimenter's channel. An analysis indicated that this unit will measure the accumulation of charge by a target to an accuracy of 0.1215% assuming that the constant error due to shorting the integrating capacitor is accounted for. The instrument is ranged to handle from 0.5 to 500 mu a of beam current. (M.C.G.)

The raw materials and fabrication procedures employed in preparing thirty two zirconium alloy compositions for evaluation as described in GEAP-3979 are reported. Considerations involved in the extension of reported laboratory procedures to larger scale production are discussed.