Performance of a Buried Radioactive High Level Waste Glass After 24 Years (open access)

Performance of a Buried Radioactive High Level Waste Glass After 24 Years

A radioactive high level waste glass was made in 1980 with Savannah River Site (SRS) Tank 15 waste. This glass was buried in the SRS burial ground for 24 years but lysimeter data was only available for the first 8 years. The glass was exhumed and analyzed in 2004. The glass was predicted to be very durable and laboratory tests confirmed the durability response. The laboratory results indicated that the glass was very durable as did analysis of the lysimeter data. Scanning electron microscopy of the glass burial surface showed no significant glass alteration consistent with the results of the laboratory and field tests. No detectable Pu, Am, Cm, Np, or Ru leached from the glass into the surrounding sediment. Leaching of {beta}/{delta} from {sup 90}Sr and {sup 137}Cs in the glass was diffusion controlled. Less than 0.5% of the Cs and Sr in the glass leached into the surrounding sediment, with >99% of the leached radionuclides remaining within 8 centimeters of the glass pellet.
Date: May 5, 2008
Creator: Jantzen, Carol M.; Kaplan, Daniel J.; Bibler, Ned E.; Peeler, David K. & Plodinec, M. J.
Object Type: Article
System: The UNT Digital Library
Neutron-induced prompt gamma activation analysis (PGAA) of metalsand non-metals in ocean floor geothermal vent-generated samples (open access)

Neutron-induced prompt gamma activation analysis (PGAA) of metalsand non-metals in ocean floor geothermal vent-generated samples

Neutron-induced prompt gamma activation analysis (PGAA) hasbeen used to analyze ocean floor geothermal vent-generated samples thatare composed of mixed metal sulfides, silicates, and aluminosilicates.The modern application of the PGAA technique is discussed, and elementalanalytical results are given for 25 elements observed in the samples. Theelemental analysis of the samples is consistent with the expectedmineralogical compositions, and very consistent results are obtained forcomparable samples. Special sensitivity to trace quantities of hydrogen,boron, cadmium, dysprosium, gadolinium, and samarium isdiscussed.
Date: December 5, 2002
Creator: Perry, D. L.; Firestone, R. B.; Molnar, G. L.; Revay, Zs.; Kasztovszky, Zs.; Gatti, R. C. et al.
Object Type: Article
System: The UNT Digital Library
Local Two-Photon Couplings and the J=0 Fixed Pole in Real and Virtual Compton Scattering (open access)

Local Two-Photon Couplings and the J=0 Fixed Pole in Real and Virtual Compton Scattering

The local coupling of two photons to the fundamental quark currents of a hadron gives an energy-independent contribution to the Compton amplitude proportional to the charge squared of the struck quark, a contribution which has no analog in hadron scattering reactions. We show that this local contribution has a real phase and is universal, giving the same contribution for real or virtual Compton scattering for any photon virtuality and skewness at fixed momentum transfer squared t. The t-dependence of this J = 0 fixed Regge pole is parameterized by a yet unmeasured even charge-conjugation form factor of the target nucleon. The t = 0 limit gives an important constraint on the dependence of the nucleon mass on the quark mass through the Weisberger relation. We discuss how this 1=x form factor can be extracted from high energy deeply virtual Compton scattering and examine predictions given by models of the H generalized parton distribution.
Date: December 5, 2008
Creator: Brodsky, Stanley J.; Llanes-Estrada, Felipe J. & Szczepaniak, Adam P.
Object Type: Article
System: The UNT Digital Library
Submittal of Final Post-Closure Inspection Letter Report for Corrective Action Unit 91: Area 3 U-3fi Injection Well, 2006 (open access)

Submittal of Final Post-Closure Inspection Letter Report for Corrective Action Unit 91: Area 3 U-3fi Injection Well, 2006

This letter serves as the post-closure monitoring letter report for the above Corrective Action Unit (CAU) for calendar year 2006. CAU 91 is inspected every six months. The first inspection was conducted on March 23, 2006, and the second inspection was conducted on September 19, 2006. All access roads, fences, gates, and signs were in excellent condition. No settling, cracking, or erosion was observed on the cover, and the use restriction had been maintained. No issues were identified, and no corrective actions were needed. The post-closure inspection checklists for CAU 91 are attached. Photographs and fields notes taken during site inspections are maintained in the project files.
Date: February 5, 2007
Creator: National Security Technologies, LLC
Object Type: Report
System: The UNT Digital Library
Combining Equations of State in Kull (open access)

Combining Equations of State in Kull

For ICF applications, the temperatures are hot enough that materials can transition to an atomic state or plasma. If we are simulating an ICF capsule, then either thru ALE, physical diffusion, transmutation by nuclear reactions, a mix model, or numerical diffusion (if we are running an Eulerian code), we will generate zones that contain multiple materials. It may be desired to treat certain mixtures of materials or mixed zones as atomic mixtures rather than as chunk mixtures. For example, suppose we have a deuterated material that is initially separated from a tritiated material. As these quantities come into contact at the atomic level, high energy neutrons will be generated from the D + T reaction. However, if we had a chunk of deuterium and a chunk of tritium in the same computational zone, then the D + T reaction would not take place. In dealing with atomic mixtures, two topics that immediately come to mind are mixed equations of state and mixed opacities. This report will only focus on the equation of state (EOS) aspect and its implementation in the Kull code. Imagine we have a zone that contains an atomic mixture of plastic and steel. If we know the …
Date: September 5, 2006
Creator: Ulitsky, M; Zimmerman, G & Renard, P
Object Type: Report
System: The UNT Digital Library
World Best Practice Energy Intensity Values for SelectedIndustrial Sectors (open access)

World Best Practice Energy Intensity Values for SelectedIndustrial Sectors

"World best practice" energy intensity values, representingthe most energy-efficient processes that are in commercial use in atleast one location worldwide, are provided for the production of iron andsteel, aluminium, cement, pulp and paper, ammonia, and ethylene. Energyintensity is expressed in energy use per physical unit of output for eachof these commodities; most commonly these are expressed in metric tonnes(t). The energy intensity values are provided by major energy-consumingprocesses for each industrial sector to allow comparisons at the processlevel. Energy values are provided for final energy, defined as the energyused at the production facility as well as for primary energy, defined asthe energy used at the production facility as well as the energy used toproduce the electricity consumed at the facility. The "best practice"figures for energy consumption provided in this report should beconsidered as indicative, as these may depend strongly on the materialinputs.
Date: June 5, 2007
Creator: Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky,Christina & Zhou, Nan
Object Type: Report
System: The UNT Digital Library
Ionization efficiency studies for xenon ions with thesuperconducting ECR ion source VENUS (open access)

Ionization efficiency studies for xenon ions with thesuperconducting ECR ion source VENUS

Ionization efficiency studies for high charge state xenon ions using a calibrated gas leak are presented. A 75% enriched {sup 129}Xe gas leak with a gas flow equivalent to 5.11p{mu}A was used in all the measurements. The experiments were performed at the VENUS (Versatile ECR ion source for Nuclear Science) ion source for 18 GHz, 28 GHz and double frequency operation. Overall, total ionization efficiencies close to 100% and ionization efficiencies into a single charge state up to 22% were measured. The influence of the biased disk on the ionization efficiency was studied and the results were somewhat surprising. When the biased disk was removed from the plasma chamber, the ionization efficiency was dramatically reduced for single frequency operation. However, using double frequency heating the ionization efficiencies achieved without the biased disk almost matched the ionization efficiencies achieved with the biased probe. In addition, we have studied the influence of the support gas on the charge state distribution of the xenon ions. Either pure oxygen or a mixture of oxygen and helium were used as support gases. The addition of a small amount of helium can increase the ionization efficiency into a single charge state by narrowing the charge state …
Date: June 5, 2007
Creator: Leitner, Daniela; Lyneis, Claude M.; Todd, DamonS. & Tarvainen,Olli
Object Type: Article
System: The UNT Digital Library
EPSILON HYPERONS IN THE REACTION K- + P -->+ K+ (open access)

EPSILON HYPERONS IN THE REACTION K- + P -->+ K+

None
Date: June 5, 1962
Creator: Alvarez, Luis W.; Berge, J. Peter; Kalbfleisch, George R.; Button-Shafer, Janice; Solmitz, Frank T.; Stevenson, M. Lynn et al.
Object Type: Article
System: The UNT Digital Library
New Low Mass Isotopes of Emanation (Element 86) (open access)

New Low Mass Isotopes of Emanation (Element 86)

Among the spallation products obtained from the 350-Mev proton bombardment of Th{sup 232} they have identified two gaseous alpha-emitters which apparently do not decay into any presently known alpha-decay chains. The half-lives observed for the decay of the alpha-activities are 23 minutes and 2.1 hours. These half-lives may be principally determined by an unknown amount of orbital electron capture. At least one alpha-emitting daughter (about 4 hours half-life) has been observed to grow from a gaseous parent, but it has not been determined whether it arises from alpha-decay or electron-capture. Since these gaseous atoms emit alpha-particles it is assumed that they are isotopes of element 86 (emanation or radon) rather than a lighter rare gas. if they were heavy isotopes such as Em{sup 221} or Em{sup 223}, both unknown, they would decay into known alpha-decay series, the neptunium and actinium series, respectively, and so would grow known short lived alpha-emitters which would have been detected. It thus appears reasonable that they must be lighter than the known emanation isotopes.
Date: September 5, 1949
Creator: Ghiorso, A.; Meinke, W. W. & Seaborg, G. T.
Object Type: Report
System: The UNT Digital Library
Adjustable Shock Test Sled for Haversine Pulses at 250 fps (open access)

Adjustable Shock Test Sled for Haversine Pulses at 250 fps

New test requirements were developed by Sandia National Laboratory to simulate a regime of shock testing not previously performed at the Kansas City Plant operated by Honeywell Federal Manufacturing & Technologies. These environments were unique in that they involved amplitude of shock >1000g with relatively long pulse durations (greater 5 ms but less than 10 ms) and involved velocity changes up to 235 ft/sec. Ten months were available to develop, design, manufacture and prove-in this new capability. We designed a new shock sled to deliver this new family of shock environments in a laboratory test. The performance range of the new sled includes five specific shocks (1000 g – 8 ms, 1300 - 6 ms, 1500 g – 5.4 ms, 1950 g – 6 ms, 2250 g – 5.4 ms; all haversine shaped), and it also incorporates adjustability to accommodate new shocks within this range. These shock environments result in velocity changes ranging from 160 fps to 250 fps. The test sled accommodates test articles weighing up to 20 lbs and measuring up to 10” along any axis.
Date: May 5, 2008
Creator: Hartwig, Troy; Hower, Brent & Seaholm, Aaron
Object Type: Article
System: The UNT Digital Library
Further Dosimetry Studies at Rhode Island Nuclear Science Center. (open access)

Further Dosimetry Studies at Rhode Island Nuclear Science Center.

The RINSC is a 2 mega-watt, light water and graphite moderated and cooled reactor that has a graphite thermal column built as a user facility for sample irradiation. Over the past decade, after the reactor conversion from a highly-enriched uranium core to a low-enriched one, flux and dose measurements and calculations had been performed in the thermal column to update the ex-core parameters and to predict the effect from in-core fuel burn-up and rearrangement. The most recent data from measurements and calculations that have been made at the RINSC thermal column since October of 2005 are reported.
Date: May 5, 2008
Creator: Reciniello, R. N.; Holden, N. E.; Hu, J. P.; Johnson, D. G.; Meddleton, M. & Tehan, T. N.
Object Type: Article
System: The UNT Digital Library
Energetics of Multiple-Ion Species Hohlraum Plasmas (open access)

Energetics of Multiple-Ion Species Hohlraum Plasmas

A study of the laser-plasma interaction processes in multiple-ion species plasmas has been performed in plasmas that are created to emulate the plasma conditions in indirect drive inertial confinement fusion targets. Gas-filled hohlraums with densities of xe22/cc are heated to Te=3keV and backscattered laser light is measured by a suite of absolutely calibrated backscatter diagnostics. Ion Landau damping is increased by adding hydrogen to the CO2/CF4 gas fill. We find that the backscatter from stimulated Brillouin scattering is reduced is monotonically reduced with increasing damping, demonstrating that Landau damping is the controlling damping mechanism in ICF relevant high-electron temperature plasmas. The reduction in backscatter is accompanied by a comparable increase in both transmission of a probe beam and an increased hohlraum radiation temperature, showing that multiple-ion species plasmas improve the overall hohlraum energetics/performance. Comparison of the experimental data to linear gain calculations as well as detailed full-scale 3D laser-plasma interaction simulations show quantitative agreement. Our findings confirm the importance of Landau damping in controlling backscatter from high-electron temperature hohlraum plasmas and have lead to the inclusion of multi-ion species plasmas in the hohlraum point design for upcoming ignition campaigns at the National Ignition Facility.
Date: November 5, 2007
Creator: Neumayer, P; Berger, R; Callahan, D; Divol, L; Froula, D; London, R et al.
Object Type: Article
System: The UNT Digital Library
Probing degradation in complex engineering silicones by 1H multiple quantum NMR (open access)

Probing degradation in complex engineering silicones by 1H multiple quantum NMR

Static {sup 1}H Multiple Quantum Nuclear Magnetic Resonance (MQ NMR) has recently been shown to provide detailed insight into the network structure of pristine silicon based polymer systems. The MQ NMR method characterizes the residual dipolar couplings of the silicon chains that depend on the average molecular weight between physical or chemical constraints. Recently, we have employed MQ NMR methods to characterize the changes in network structure in a series of complex silicone materials subject to numerous degradation mechanisms, including thermal, radiative, and desiccative. For thermal degradation, MQ NMR shows that a combination of crosslinking due to post-curing reactions as well as random chain scissioning reactions occurs. For radiative degradation, the primary mechanisms are via crosslinking both in the network and at the interface between the polymer and the inorganic filler. For samples stored in highly desiccating environments, MQ NMR shows that the average segmental dynamics are slowed due to increased interactions between the filler and the network polymer chains.
Date: September 5, 2007
Creator: Maxwell, R S; Chinn, S C; Giuliani, J & Herberg, J L
Object Type: Article
System: The UNT Digital Library
Electrochromically switched, gas-reservoir metal hydride devices with application to energy-efficient windows (open access)

Electrochromically switched, gas-reservoir metal hydride devices with application to energy-efficient windows

Proof-of-principle gas-reservoir MnNiMg electrochromic mirror devices have been investigated. In contrast to conventional electrochromic approaches, hydrogen is stored (at low concentration) in the gas volume between glass panes of the insulated glass units (IGUs). The elimination of a solid state ion storage layer simplifies the layer stack, enhances overall transmission, and reduces cost. The cyclic switching properties were demonstrated and system durability improved with the incorporation a thin Zr barrier layer between the MnNiMg layer and the Pd catalyst. Addition of 9 percent silver to the palladium catalyst further improved system durability. About 100 full cycles have been demonstrated before devices slow considerably. Degradation of device performance appears to be related to Pd catalyst mobility, rather than delamination or metal layer oxidation issues originally presumed likely to present significant challenges.
Date: May 5, 2008
Creator: Anders, Andre; Slack, Jonathan L. & Richardson, Thomas J.
Object Type: Article
System: The UNT Digital Library
Measurement of B \to X \gamma Decays and Determination of |V_{td}/V_{ts}| (open access)

Measurement of B \to X \gamma Decays and Determination of |V_{td}/V_{ts}|

Using a sample of 383 million B{bar B} events collected by the BABAR experiment, they measure sums of seven exclusive final states B {yields} X{sub d(s)}{gamma}, where X{sub d}(X{sub s}) is a non-strange (strange) charmless hadronic system in the mass range 0.6-1.8 GeV/c{sup 2}. After correcting for unmeasured decay modes in this mass range, they obtain a branching fraction for b {yields} d{gamma} of (7.2 {+-} 2.7(stat.) {+-} 2.3(syst.)) x 10{sup -6}. Taking the ratio of X{sub d} to X{sub s} they find {Lambda}(b {yields} d{gamma})/{Lambda}(b {yields} s{gamma}) = 0.033 {+-} 0.013(stat.) {+-} 0.009(syst.), from which they determine |V{sub td}/V{sub ts}| = 0.177 {+-} 0.043.
Date: August 5, 2008
Creator: Collaboration, The BABAR & Aubert, B.
Object Type: Article
System: The UNT Digital Library
Sediment transport time measured with U-Series isotopes: Resultsfrom ODP North Atlantic Drill Site 984 (open access)

Sediment transport time measured with U-Series isotopes: Resultsfrom ODP North Atlantic Drill Site 984

High precision uranium isotope measurements of marineclastic sediments are used to measure the transport and storage time ofsediment from source to site of deposition. The approach is demonstratedon fine-grained, late Pleistocene deep-sea sediments from Ocean DrillingProgram Site 984A on the Bjorn Drift in the North Atlantic. The sedimentsare siliciclastic with up to 30 percent carbonate, and dated by sigma 18Oof benthic foraminifera. Nd and Sr isotopes indicate that provenance hasoscillated between a proximal source during the last three interglacialperiods volcanic rocks from Iceland and a distal continental sourceduring glacial periods. An unexpected finding is that the 234U/238Uratios of the silicate portion of the sediment, isolated by leaching withhydrochloric acid, are significantly less than the secular equilibriumvalue and show large and systematic variations that are correlated withglacial cycles and sediment provenance. The 234U depletions are inferredto be due to alpha-recoil loss of234Th, and are used to calculate"comminution ages" of the sediment -- the time elapsed between thegeneration of the small (<_ 50 mu-m) sediment grains in the sourceareas by comminution of bedrock, and the time of deposition on theseafloor. Transport times, the difference between comminution ages anddepositional ages, vary from less than 10 ky to about 300 to 400 ky forthe …
Date: June 5, 2006
Creator: DePaolo, Donald J.; Maher, Kate; Christensen, John N. & McManus,Jerry
Object Type: Article
System: The UNT Digital Library
COMPARISON OF RESPONSE OF 9977 TEST PACKAGES TO ANALYTICAL RESULTS (open access)

COMPARISON OF RESPONSE OF 9977 TEST PACKAGES TO ANALYTICAL RESULTS

Each of the hypothetical accident test cases for the 9977 prototypes was included in the battery of finite element structural analyses performed for the package. Comparison of the experimental and analytical results provides a means of confirming that the analytical model correctly represents the physical behavior of the package. The ability of the analytical model to correctly predict the performance of the foam overpack material for the crush test is of particular interest. The dissipation of energy in the crushing process determines the deceleration of the package upon impact and the duration of the impact. In addition, if the analytical model correctly models the foam behavior, the predicted deformation of the package will match that measured on the test articles. This study compares the deformations of the test packages with the analytical predictions. In addition, the impact acceleration and impact duration for the test articles are compared with those predicted by the analyses.
Date: December 5, 2007
Creator: Smith, A & Tsu-Te Wu, T
Object Type: Article
System: The UNT Digital Library
Report on Qiagen Columns with Precipitation versus Packed Bed Technology for Trace Amounts of DNA (open access)

Report on Qiagen Columns with Precipitation versus Packed Bed Technology for Trace Amounts of DNA

The assured limit of detection (LOD), where 100% of the PCR assays are successful, for the Qiagen spin column is dramatically improved when combined with an ethanol precipitation step of the eluted sample. A detailed SOP for the ethanol precipitation was delivered as a separate report. A key finding in the precipitation work was to incubate the ethanol precipitation at -20{sup o}C overnight when concentrating low copy number samples. Combining this modified ethanol precipitation with the Qiagen spin columns, the limit of assured detection was improved by 1-2 orders of magnitude, for the aliquot and assay variables used. The lower limit of detection (defined as when at least 1 assay of 1 aliquot was positive) was only improved by approximately 1 order of magnitude. The packed bed process has the potential of a 20-fold improvement in the limit of detection compared to Qiagen plus precipitation, based on a mass balance analysis for the entire DNA concentration and purification processes. Figure ES1 shows a mass balance for all the DNA processing steps. The packed bed process minimizes losses from elution, precipitation, and pipetting (aliquoting and transferring). Figure ES1 assumes that 100 copies of DNA serve as the input sample. Efficiencies for …
Date: February 5, 2008
Creator: Wheeler, E. K.; Erler, A. M. & Seiler, A.
Object Type: Report
System: The UNT Digital Library
Fundamental Investigations of Nanoscale Phenomena in Beam-Assisted Nucleation, Growth and Surface Smoothing, Using in situ LEEM (open access)

Fundamental Investigations of Nanoscale Phenomena in Beam-Assisted Nucleation, Growth and Surface Smoothing, Using in situ LEEM

The purposes for which this grant was provided were specifically (1) to construct a tandem instrument that combined a low energy electron microscope (LEEM) with an ion beam source capably of irradiating a sample during observation of the surface using LEEM; and (2) to employ the new machine to whatever degree possible to observe the evolution of clean crystal surfaces during ion beam irradiation. A principal motivation was to investigate the fundamental behavior of radiation damage under circumstances for which the damage can be observed directly in real time as it occurs. A second main motivation was to create tunable perturbations of the defect (adatom and advacancy) equilibrium on clean crystal planes and in this way explore the fundamental kinetics of surface behavior that enters into numerous phenomena of interest to DOE including surface erosion, catalysis, and the damage to crystals caused by impacts of energetic particles. The funding has been employed to successfully pursue all the original goals, and additional opportunities that developed as a result of discoveries made in this research.
Date: November 5, 2008
Creator: Flynn, Colin P.
Object Type: Text
System: The UNT Digital Library
WIPP Facility Work Plan for Solid Waste Management Units and Areas of Concern (open access)

WIPP Facility Work Plan for Solid Waste Management Units and Areas of Concern

his 2002 Facility Work Plan (FWP) has been prepared as required by Module VII,Permit Condition VII.U.3 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit, NM4890139088-TSDF (the Permit) (New Mexico Environment Department [NMED], 1999a), and incorporates comments from the NMED received onDecember 6, 2000 (NMED, 2000a). This February 2002 FWP describes the program-matic facility-wide approach to future investigations at Solid Waste Management Units (SWMU) and Areas of Concern (AOC) specified in the Permit. The Permittees are evaluating data from previous investigations of the SWMUs and AOCs against the mostrecent guidance proposed by the NMED. Based on these data, and completion of the August 2001 sampling requested by the NMED, the Permittees expect that no further sampling will be required and that a request for No Further Action (NFA) at the SWMUs and AOCs will be submitted to the NMED. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA)Facility Investigation (RFI) specified in Module VII of the Permit, current NMED guidance identifies an Accelerated Corrective Action Approach (ACAA) that may beused …
Date: March 5, 2002
Creator: Westinghouse TRU Solutions LLC
Object Type: Report
System: The UNT Digital Library
Search for Invisible Decays of a Light Scalar in Radiative Transitions Y(3S)->gamma A0 (open access)

Search for Invisible Decays of a Light Scalar in Radiative Transitions Y(3S)->gamma A0

We search for a light scalar particle produced in single-photon decays of the {Upsilon}(3S) resonance through the process {Upsilon}(3S) {yields} {gamma} + A{sup 0}, A{sup 0} {yields} invisible. Such an object appears in Next-to-Minimal Supersymmetric extensions of the Standard Model, where a light CP-odd Higgs boson naturally couples strongly to b-quarks. If, in addition, there exists a light, stable neutralino, decays of A{sup 0} could be preferentially to an invisible final state. We search for events with a single high-energy photon and a large missing mass, consistent with a 2-body decay of {Upsilon}(3S). We find no evidence for such processes in a sample of 122 x 10{sup 6} {Upsilon}(3S) decays collected by the BABAR collaboration at the PEP-II B-factory, and set 90% C.L. upper limits on the branching fraction {Beta}({Upsilon}(3S) {yields} {gamma}A{sup 0}) x {Beta}(A{sup 0} {yields} invisible) at (0.7-31) x 10{sup -6} in the mass range m{sub A{sup 0}} {le} 7.8 GeV. The results are preliminary.
Date: November 5, 2008
Creator: Aubert, B.
Object Type: Article
System: The UNT Digital Library
Radiological Scoping Survey of the Scotia Depot Scotia, New York (open access)

Radiological Scoping Survey of the Scotia Depot Scotia, New York

At the request of the Defense Logistics Agency, the Oak Ridge Institute for Science and Education conducted radiological scoping surveys of the Scotia Depot during the period of September 24 through 27, 2007. The scoping survey included visual inspections and limited radiological surveys performed in accordance with area classification that included surface scans, total and removable activity measurements, and soil sampling.
Date: February 5, 2005
Creator: Bailey, E. N.
Object Type: Report
System: The UNT Digital Library
Protein Microarrays--Without a Trace (open access)

Protein Microarrays--Without a Trace

Many experimental approaches in biology and biophysics, as well as applications in diagnosis and drug discovery, require proteins to be immobilized on solid supports. Protein microarrays, for example, provide a high-throughput format to study biomolecular interactions. The technique employed for protein immobilization is a key to the success of these applications. Recent biochemical developments are allowing, for the first time, the selective and traceless immobilization of proteins generated by cell-free systems without the need for purification and/or reconcentration prior to the immobilization step.
Date: April 5, 2007
Creator: Camarero, J A
Object Type: Article
System: The UNT Digital Library
Influence and measurement of mass ablation in ICF implosions (open access)

Influence and measurement of mass ablation in ICF implosions

Point design ignition capsules designed for the National Ignition Facility (NIF) currently use an x-ray-driven Be(Cu) ablator to compress the DT fuel. Ignition specifications require that the mass of unablated Be(Cu), called residual mass, be known to within 1% of the initial ablator mass when the fuel reaches peak velocity. The specifications also require that the implosion bang time, a surrogate measurement for implosion velocity, be known to +/- 50 ps RMS. These specifications guard against several capsule failure modes associated with low implosion velocity or low residual mass. Experiments designed to measure and to tune experimentally the amount of residual mass are being developed as part of the National Ignition Campaign (NIC). Tuning adjustments of the residual mass and peak velocity can be achieved using capsule and laser parameters. We currently plan to measure the residual mass using streaked radiographic imaging of surrogate tuning capsules. Alternative techniques to measure residual mass using activated Cu debris collection and proton spectrometry have also been developed. These developing techniques, together with bang time measurements, will allow us to tune ignition capsules to meet NIC specs.
Date: September 5, 2007
Creator: Spears, B. K.; Hicks, D.; Velsko, C.; Stoyer, M.; Robey, H.; Munro, D. et al.
Object Type: Article
System: The UNT Digital Library