Control of the electric field profile in the Hall Thruster through the positioning of an additional electrode along the channel is shown theoretically to enhance the efficiency. The reduction of the potential drop near the anode by use of the additional electrode increases the plasma density there, through the increase of the electron and ion transit times, causing the ionization in the vicinity of the anode to increase. The resulting separation of the ionization and acceleration regions increases the propellant and energy utilizations. An abrupt sonic transition is forced to occur at the axial location of the additional electrode, accompanied by the generation of a large (theoretically infinite) electric field. This ability to generate a large electric field at a specific location along the channel, in addition to the ability to specify the electric potential there, allows one further control of the electric field profile in the thruster. In particular, when the electron temperature is high, a large abrupt voltage drop is induced at the vicinity of the additional electrode, a voltage drop that can comprise a significant part of the applied voltage.

This Corrective Action Investigation Plan contains the U.S. Department of Energy, Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 409 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 409 consists of three Corrective Action Sites (CASs): TA-53-001-TAB2, Septic Sludge Disposal Pit No.1; TA-53-002-TAB2, Septic Sludge Disposal Pit No.2; and RG-24-001-RGCR, Battery Dump Site. The Septic Sludge Disposal Pits are located near Bunker Two, close to Area 3, on the Tonopah Test Range. The Battery Dump Site is located at the abandoned Cactus Repeater Station on Cactus Peak. The Cactus Repeater Station was a remote, battery-powered, signal repeater station. The two Septic Sludge Disposal Pits were suspected to be used through the late 1980s as disposal sites for sludge from septic tanks located in Area 3. Based on site history collected to support the Data Quality Objectives process, contaminants of potential concern are the same for the disposal pits and include: volatile organic compounds (VOCs), semivolatile organic compounds, total petroleum hydrocarbons (TPHs) as gasoline- and diesel-range organics, polychlorinated biphenyls, Resource Conservation and Recovery Act metals, and radionuclides (including plutonium and depleted uranium). The …

The evolution of the deformed microstructure as a function of imposed plastic strain is of interest as it provides information on the material hardening characteristics and mechanism(s) by which cold work energy is stored. This has been extensively studied using transmission electron microscopy (TEM), where the high spatial and orientational resolution of the technique is used to advantage to study local phenomenon such as dislocation core structures and interactions of dislocations. With the recent emergence of scanning electron microscope (SEM) based automated electron backscatter diffraction (EBSD) techniques, it has now become possible to make mesoscale observations that are statistical in nature and complement the detailed TEM observations. Correlations of such observations will be demonstrated for the case of Ni-base alloys, which are typically non-cell forming solid solution alloys when deformed at ambient temperatures. For instance, planar slip is dominant at low strain levels but evolves into a microstructure where distinct crystallographic dislocation-rich walls form as a function of strain and grain orientation. Observations recorded using both TEM and EBSD techniques are presented and analyzed for their implication on subsequent annealing characteristics.

With the exception of control of heating, ventilation, and air conditioning (HVAC) ventilation fans, and their shutdown in the case of smoke in the ducts, all implementations of Programmable Logic Controllers (PLCs) in Dzero have been made within the fundamental premise that no uncertified PLC apparatus shall be entrusted with the safety of equipment or personnel. Thus although PLCs are used to control and monitor all manner of intricate equipment, simple hardware interlocks and relief devices provide basic protection against component failure, control failure, or inappropriate control operation. Nevertheless, this report includes two observations as follows: (1) It may be prudent to reconfigure the link between the Pyrotronics system and the HVAC system such that the Pyrotronics system provides interlocks to the ventilation fans instead of control inputs to the uncertified HVAC PLCs. Although the Pyrotronics system is certified and maintained to life safety standards, the HVAC system is not. A hardware or software failure of the HVAC system probably should not be allowed to result in the situation where the ventilation fans in a smoke filled duct continue to operate. Dan Markley is investigating this matter. (2) It may also be prudent to examine the network security of those …

None

Data Quality Objectives methodology is applied to Loss-on-Ignition (LOI) moisture content testing for stabilized nuclear materials. This work was performed by Pacific Northwest National Laboratory in support of the Plutonium Finishing Plant (PFP)/Fluor Hanford, Inc. Historical results on LOI test results for two material types, oxide and sludge, are used to estimate within container variability. This variability estimate is then used in formulating the two recommended acceptance criteria for containers of material. The criteria which follow are proposed to replace the current criterion, which requires recycle if either of two container LOI measurements exceed 0.5 wt%, the DOE Standard 3013-99 threshold value. (1) The 95% upper confidence limit (UCL) for the true mean underlying moisture content in the container material should be less than 0.5 wt%. (2) The difference between the two LOI measurements per container should not exceed their expected 95th percentile relative to the estimated variability. Containers not meeting the first criterion, or those that generate in any negative LOI result, require material recycle. Containers not meeting the second criteria require review of the measurement results, potentially leading to resampling and retesting. Data from Los Alamos National Laboratory studies on moisture testing are obtained and analyzed. The performance …

Plans to eliminate the positron accumulator ring (PAR) from the Advanced Photon Source (APS) injector complex have created the need for a device to limit the allowable beam charge injected into the APS injector synchrotrons. The beam shut-off current monitor (BESOCM) was chosen to provide this function. This new application of the BESOCM provided the opportunity to explore new design philosophies. Two design goals were to de-emphasize reliance on external signals and to become insensitive to timing variations. Both of these goals were accomplished by deriving the trigger directly from the beam. This paper will discuss the features of the new BESOCM design and present data demonstrating its function.

Single-shot spectrum measurements of the radiation emitted by an electron bunch provide a novel way to characterize the bunch shape. Shot noise fluctuations in the longitudinal beam density result in radiation with a spectrum that consists of spikes with width inversely proportional to the bunch length. The variance of the Fourier transform of the spectrum is proportional to the convolution function of the beam current averaged over many bunches. After the convolution function is found, the phase retrieval technique can be applied to recover the bunch shape. This technique has been used to analyze the shape of the 4-ps-long bunches at the Low-Energy Undulator Test Line at the Advanced Photon Source.

The United States Department of Energy initiated the Nuclear Energy Research Initiative (NERI) to conduct research and development with the objectives of: (1) overcoming the principal technical obstacles to expanded nuclear energy use, (2) advancing the state of nuclear technology to maintain its competitive position in domestic and world markets, and (3) improving the performance, efficiency, reliability, and economics of nuclear energy. Fiscal Year 1999 program funding is $19 Million, with increased finding expected for subsequent years, emphasizing international cooperation. Among the programs selected for funding is the ``Smart Equipment and Systems to Improve Reliability and Safety in Future Nuclear Power Plant Operations''. This program is a 30 month collaborative effort bringing together the technical capabilities of ABB C-E Nuclear Power, Inc. (ABB CENP), Sandia National Laboratories, Duke Engineering and Services (DE and S), Massachusetts Institute of Technology (MIT) and Pennsylvania State University (PSU). The program's goal is to design, develop and evaluate an integrated set of smart equipment and predictive maintenance tools and methodologies that will significantly reduce nuclear plant construction, operation and maintenance costs. To accomplish this goal the Smart Equipment program will: (1) Identify and prioritize nuclear plant equipment that would most likely benefit from adding smart …

None

Tomographic reconstruction of explosive events require time resolved multipal lines of sight. Considered here is a four (or eight) line of sight beam layout for a nominal 20 MeV 2000 Ampere 2 microsecond electron beam for generation of x-rays 0.9 to 5 meters from a given point, the ''firing point''. The requirement of a millimeter spatial x-ray source requires that the electron beam be delivered to the converter targets with sub-millimeter precision independent of small variations in beam energy and initial conditions. The 2 usec electron beam pulse allows for four bursts in each line, separated in time by about 500 microseconds. Each burst is divided by a electro-magnetic kicker into four (or eight) pulses, one for each beamline. The arrival time of the four (or eight) beam pulses at the x-ray target can be adjusted by the kicker timing and the sequence that the beams of each burst are switched into the different beamlines. There exists a simple conceptual path from a four beamline to a eight beamline upgrade. The eight line beamline is built up from seven unique types of sub-systems or ''blocks''. The beamline consists of 22 of these functional blocks and contains a total of 455 …

None

The Cooperative Research and Development Agreement (CRADA) was directed towards development of diffusion resistant, high-purity wafer carriers for Si semiconductor production with improved properties compared to current materials. The determination of the infiltration behavior is important for controlling the fabrication process to obtain consistent high-quality products. Ammonium molybdate or molybdenum carbide were found to be suitable as a precursor to produce SiC-MoSi{sub 2}-Si composites by Si infiltration into carbon preforms. Experiments on the pyrolysis of the preforms showed variable infiltration behavior by the molten Si (within the range of conditions in the present study). Further research is required to reproducibly and consistently fabricate flaw-free articles. The strength of the composites fabricated to-date was 325 {+-} 124 MPa, which is higher than current commercial products. Better process control should result in higher average strengths and reduce the variability.

This paper describes an object-oriented approach to music composition and sound design. The approach unifies the processes of music making and instrument building by using similar logic, objects, and procedures. The composition modules use an abstract representation of musical data, which can be easily mapped onto different synthesis languages or a traditionally notated score. An abstract base class is used to derive classes on different time scales. Objects can be related to act across time scales, as well as across an entire piece, and relationships between similar objects can replicate traditional music operations or introduce new ones. The DISCO (Digital Instrument for Sonification and Composition) system is an open-ended work in progress.

The authors present the Sequential Access Model (SAM), which is the data handling system for D0, one of two primary High Energy Experiments at Fermilab. During the next several years, the D0 experiment will store a total of about 1 PByte of data, including raw detector data and data processed at various levels. The design of SAM is not specific to the D0 experiment and carries few assumptions about the underlying mass storage level; its ideas are applicable to any sequential data access. By definition, in the sequential access mode a user application needs to process a stream of data, by accessing each data unit exactly once, the order of data units in the stream being irrelevant. The units of data are laid out sequentially in files. The adopted model allows for significant optimizations of system performance, decrease of user file latency and increase of overall throughput. In particular, caching is done with the knowledge of all the files needed in the near future, defined as all the files of the already running or submitted jobs. The bulk of the data is stored in files on tape in the mass storage system (MSS) called Enstore[2] and also developed at Fermilab. …

Antireflection (AR) coatings can be incorporated into highly transmitting glazings that, depending on their cost, performance, and durability of optical properties, can be economically viable in solar collectors, agricultural greenhouses, and PV systems. A number of AR-coated glazings have been prepared under the auspices of the International Energy Agency (IEA) Working Group on Durability of Materials for Solar Thermal Collectors. The AR coatings are of two types, including (1) various sol-gels applied to glass and (2) an embossed treatment of sheet acrylic. Typically, for unweathered glazings, a 4%--5% increase in solar-weighted transmittance has been achieved. For AR-coated glass, reflectance values as low as 0.5%--0.7% at selected wavelengths (680--720 nm) were obtained. To determine the durability of the hemispherical transmittance, several collaborating countries are testing these materials both outdoors and in accelerated weathering chambers. All materials exposed outdoors are affixed to mini-collector boxes to simulate flat-plate collector conditions. Results for candidate AR coatings weathered at geographically disperse outdoor test sites exhibit changes in spectral transmittance primarily in the high visible range (600--700 nm). Accelerated testing at measured levels of simulated solar irradiance and at different constant levels of temperature and relative humidity have been performed in different countries. Parallel testing with …

The commercial development of reliable 4 K cryocoolers improves the future prospects for magnets made from low temperature superconductors (LTS). The hope of the developers of high temperature superconductors (HTS) has been to replace liquid helium cooled LTS magnets with HTS magnets that operate at or near liquid nitrogen temperature. There has been limited success in this endeavor, but continued problems with HTS conductors have greatly slowed progress toward this goal. The development of cryocoolers that reliably operate below 4 K will allow magnets made from LTS conductor to remain very competitive for many years to come. A key enabling technology for the use of low temperature cryocoolers on LTS magnets has been the development of HTS leads. This report describes the characteristics of LTS magnets that can be successfully melded to low-temperature cryocoolers. This report will also show when it is not appropriate to consider the use of low-temperature cryocoolers to cool magnets made with LTS conductor. A couple of specific examples of LTS magnets where cryocoolers can be used are given.

Turbulent combustion fields established by detonative explosions of TNT in confinements of different sizes are studied by high-resolution numerical simulation, using AMR (Adaptive Mesh Refinement) method. The chambers are filled with nitrogen or air at NPT conditions. In the second case, the detonation products, rich in C and CO, act, upon turbulent mixing with air, as fuel in an exothermic process of combustion, manifested by a distinct pressure rise. It is the evolution in space and time of this dynamic process that formed the principal focus of this study. Our results demonstrate a dominating influence of the size of the enclosure on the burning rate--an effect that cannot be expressed in terms of the classical burning speed. Under such circumstances, combustion is of considerable significance, since it is associated with a calorific value (''heat release'') of an order of 3500 Cal/gm, as compared to 1100 Cal/gm of TNT detonation. The numerical simulations provide considerable insight into the evolution of combustion fields dominated by shock-turbulence interactions. Fuel consumption histories, extracted from the simulations, reveal the dynamic features of the system, represented by the rate of combustion (akin to velocity) and its change (akin to acceleration). Time profiles of the mass fraction …

Electron-capture delayed fission (ECDF) properties of neutron-deficient einsteinium isotopes were investigated using a combination of chemical separations and on-line radiation detection methods. {sup 242}Es was produced via the {sup 233}U({sup 14}N,5n){sup 242}Es reaction at a beam energy of 87 MeV (on target) in the lab system, and was found to decay with a half-life of 11 {+-} 3 seconds. The ECDF of {sup 242}Es showed a highly asymmetric mass distribution with an average pre-neutron emission total kinetic energy (TKE) of 183 {+-} 18 MeV. The probability of delayed fission (P{sub DF}) was measured to be 0.006 {+-} 0.002. In conjunction with this experiment, the excitation functions of the {sup 233}U({sup 14}N,xn){sup 247{minus}x}Es and {sup 233}U({sup 15}N,xn){sup 248{minus}x}Es reactions were measured for {sup 243}Es, {sup 244}Es and {sup 245}Es at projectile energies between 80 MeV and 100 MeV.

The purpose of this analysis is to identify conceptual design options for the emplacement ventilation system, specifically within the emplacement drifts. The designs are based on the Enhanced Design Alternative (EDA) II concept developed during the license application design selection exercise as described in the ''License Application Design Selection Report'' (CRWMS M&O 1999a) and in the emplacement drift ''Ventilation Model'' (CRWMS M&O 2000c). The scope of this analysis, as outlined in the development plan (CRWMS M&O 2000a), includes the following tasks: (1) Description of the air flow path in the emplacement drifts. (2) Examination of the exhaust options for air exiting the emplacement drifts. (3) Examination of the air control options in the emplacement drifts. (4) Discussion of following system components and structures: emplacement isolation doors, portable shadow shield and exhaust main partition. The objective of this analysis is to support site recommendation through input to the system description documents. Off-normal conditions are not discussed in this analysis.

Non-conservation of CP symmetry can manifest itself in non-lepton ichyperon decays as a difference in the decay parameter between the strange-baryon decay and its charge conjugate. By comparing the decay distribution in the {Lambda} helicity frame for the decay sequence {Xi}{sup -} {yields} {Lambda}{pi}{sup -}, {Lambda} {yields} p{pi}{sup -} with that of {bar {Xi}}{sup +} decay, E756 at Fermilab did not observe any CP-odd effect at the 10{sup -2} level. The status of a follow-up experiment, HyperCP (FNAL E871), to search for CP violation in charged {Xi}-{Lambda} decay with a sensitivity of 10{sup -4} is also presented.

The role of Polarized Neutron Reflectivity (PNR) for studying natural and synthetic exchange biased systems is illustrated. For a partially oxidized thin film of Co, cycling of the magnetic field causes a considerable reduction of the bias, which the onset of diffuse neutron scattering shows to be due to the loosening of the ferromagnetic domains. On the other hand, PNR measurements of a model exchange bias junction consisting of an n-layered Fe/Cr antiferromagnetic (AF) superlattice coupled with an m-layered Fe/Cr ferromagnetic (F) superlattice confirm the predicted collinear magnetization in the two superlattices. The two magnetized states of the F (along or opposite to the bias field) differ only in the relative orientation of the F and adjacent AF layer. The possibility of reading clearly the magnetic state at the interface pinpoints the commanding role that PNR is having in solving this intriguing problem.

The technique of near forward laser scattering is used to infer characteristics of intrinsic and controlled density fluctuations in laser-produced plasmas. Intrinsic fluctuations are studied in long-scale length plasmas where we find that the fluctuations exhibit scale sizes related to the intensity variation scales in the plasma-forming and interaction beams. Stimulated Brillouin forward scattering and filamentation appear to be the primary mechanism through which these fluctuations originate. The beam spray resulting from these fluctuations is important to understand since it can affect symmetry in an inertial confinement fusion (ICF) experiment. Controlled fluctuations are studied in foam and exploding foil targets. Forward scattered light from foam targets shows evidence that the initial target inhomogeneities remain after the target is laser heated. Forward scattered light from an exploding foil plasma shows that a regular intensity pattern can be used to produce a spatially correlated density fluctuation pattern. These results provide data which are being used to benchmark numerical models of beam spray.

A method for forming a periodic dielectric structure exhibiting photonic band gap effects includes forming a slurry of a nano-crystalline ceramic dielectric or semiconductor material and monodisperse polymer microsphere, depositing a film of the slurry on a substrate, drying the film, and calcining the film to remove the polymer microsphere there from. The film may be cold-pressed after drying and prior to calcining. The ceramic dielectric or semiconductor material may be titania, and the polymer microsphere may be polystyrenemicrosphere.