Careful thermometric analysis (TMA) on powders of micron-sized triamino-trinitrobenzene (TATB) crystallites are shown to display irreversible growth in volume when subjected to repeated cycles of heating and cooling. Such behavior is counter-intuitive to typical materials response to simulated annealing cycles in atomic-scale molecular dynamics. However, through coarse-grained simulations using a mesoscale Hamiltonian we quantitatively reproduce irreversible growth behavior in such powdered material. We demonstrate that irreversible growth happens only in the presence of intrinsic crystalline anisotropy, and is mediated by particles much smaller than the average crystallite size.

We present the first statistically meaningful results fromtwo-K0s interferometry in heavy-ion collisions. A model that takes theeffect of the strong interaction into account has been used to fit themeasured correlation function. The effects of single and coupled channelwere explored. At the mean transverse mass m_T = 1.07 GeV, we obtain thevalues R = 4.09 +- 0.46 (stat.) +- 0.31 (sys) fm and lambda = 0.92 +-0.23 (stat) +- 0.13 (sys), where R and lambda are the invariant radiusand chaoticity parameters respectively. The results are qualitativelyconsistent with m_T systematics established with pions in a scenariocharacterized by a strong collective flow.

For ICF applications, the temperatures are hot enough that materials can transition to an atomic state or plasma. If we are simulating an ICF capsule, then either thru ALE, physical diffusion, transmutation by nuclear reactions, a mix model, or numerical diffusion (if we are running an Eulerian code), we will generate zones that contain multiple materials. It may be desired to treat certain mixtures of materials or mixed zones as atomic mixtures rather than as chunk mixtures. For example, suppose we have a deuterated material that is initially separated from a tritiated material. As these quantities come into contact at the atomic level, high energy neutrons will be generated from the D + T reaction. However, if we had a chunk of deuterium and a chunk of tritium in the same computational zone, then the D + T reaction would not take place. In dealing with atomic mixtures, two topics that immediately come to mind are mixed equations of state and mixed opacities. This report will only focus on the equation of state (EOS) aspect and its implementation in the Kull code. Imagine we have a zone that contains an atomic mixture of plastic and steel. If we know the …

High precision uranium isotope measurements of marineclastic sediments are used to measure the transport and storage time ofsediment from source to site of deposition. The approach is demonstratedon fine-grained, late Pleistocene deep-sea sediments from Ocean DrillingProgram Site 984A on the Bjorn Drift in the North Atlantic. The sedimentsare siliciclastic with up to 30 percent carbonate, and dated by sigma 18Oof benthic foraminifera. Nd and Sr isotopes indicate that provenance hasoscillated between a proximal source during the last three interglacialperiods volcanic rocks from Iceland and a distal continental sourceduring glacial periods. An unexpected finding is that the 234U/238Uratios of the silicate portion of the sediment, isolated by leaching withhydrochloric acid, are significantly less than the secular equilibriumvalue and show large and systematic variations that are correlated withglacial cycles and sediment provenance. The 234U depletions are inferredto be due to alpha-recoil loss of234Th, and are used to calculate"comminution ages" of the sediment -- the time elapsed between thegeneration of the small (<_ 50 mu-m) sediment grains in the sourceareas by comminution of bedrock, and the time of deposition on theseafloor. Transport times, the difference between comminution ages anddepositional ages, vary from less than 10 ky to about 300 to 400 ky forthe …

Transmission electron microscopy (TEM) was used to study pendeo-epitaxial GaN layers grown on polar and non-polar 4H SiC substrates. The structural quality of the overgrown layers was evaluated using a number of TEM methods. Growth of pendeo-epitaxial layers on polar substrates leads to better structural quality of the overgrown areas, however edge-on dislocations are found at the meeting fronts of two wings. Some misorientation between the 'seed' area and wing area was detected by Convergent Beam Electron Diffraction. Growth of pendeo-epitaxial layers on non-polar substrates is more difficult. Two wings on the opposite site of the seed area grow in two different polar directions with different growth rates. Most dislocations in a wing grown with Ga polarity are 10 times wider than wings grown with N-polarity making coalescence of these layers difficult. Most dislocations in a wing grown with Ga polarity bend in a direction parallel to the substrate, but some of them also propagate to the sample surface. Stacking faults formed on the c-plane and prismatic plane occasionally were found. Some misorientation between the wings and seed was detected using Large Angle Convergent Beam Diffraction.

Renewable energy certificates (RECs) represent the bundle of information that describes the characteristics of renewable electricity generation, and may be (and increasingly are) sold separately from the underlying electricity itself. RECs are a relatively new phenomenon, emerging as a tradable commodity in voluntary markets in the late 1990s, and gaining strength as a means of compliance with various state policy requirements affecting renewable generation in the early 2000s (Holt and Bird 2005). Twenty states and Washington, D.C. now have mandatory renewables portfolio standard (RPS) obligations, and most of these may be satisfied by owning and retiring RECs. Many states also have fuel source and emissions disclosure requirements, for which RECs are useful. Even where state policy does not allow unbundled and fully tradable RECs to meet these requirements, RECs may still be used as an accounting and verification tool (REC tracking systems are in place or under development in many regions of the U.S.). These applications, plus REC trading activity in support of voluntary green claims, give rise to potential ''double counting'' to the extent that the purchaser of the RECs and the purchaser of the underlying electricity both make claims to the renewable energy attributes of the facility in …

Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to economically do high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology is currently hampered by the lack of the acquisition technology necessary to record the large volumes of the high frequency, high signal-to-noise-ratio borehole seismic data needed to do 3D imaging. This project takes direct aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array will remove the technical acquisition barrier for recording the necessary volumes of data to do high resolution 3D VSP or 3D cross well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that will allow the Gas industry to take the next step in their quest for higher resolution images of the gas reservoirs for the purpose of improving the recovery of the natural gas resources. Today only a fraction of the original Oil or Gas in place is produced when reservoirs are …

Characterization of transuranic waste is needed to makedecisions about waste site remediation. Soil-gas sampling for xenonisotopes can be used to define the locations of spent fuel andtransuranic wastes. Radioxenon in the subsurface is characteristic oftransuranic waste and can be measured with extreme sensitivity usinglarge-volume soilgas samples. Measurements at the Hanford Site showed133Xe and 135Xe levels indicative of 240Pu spontaneous fission. Stablexenon isotopic ratios from fission are distinct from atmospheric xenonbackground. Neutron capture by 135Xe produces an excess of 136Xe inreactor-produced xenon providing a means of distinguishing spent fuelfrom separated transuranic materials.

We report on searches for D{sup 0}-{bar D}{sup 0} mixing using decay-time distributions of D{sup 0} {yields} K{pi} and D{sup 0} {yields} K{sup (*)}e{nu} decays and a lifetime ratio analysis of D{sup 0} {yields} K{sup +}K{sup -}, {pi}{sup +}{pi}{sup -} decays using 91 fb{sup -1} of e{sup +}e{sup -} data taken at the PEP-II asymmetric-energy storage ring at energies near 10.6 GeV. Searches for CP-violation in D{sup 0} mixing and decay are also reported, as well as a measurement of R{sub D}, the ratio of the doubly Cabibbo-suppressed decay rate to the Cabibbo-allowed decay rate.

This paper documents the application of a new image processing algorithm, two-dimensional non-linear additive decomposition (NLAD), which is used to identify regions in a digital image whose gray-scale (or color) intensity is different than the surrounding background. Standard image segmentation algorithms exist that allow users to segment images based on gray-scale intensity and/or shape. However, these processing techniques do not adequately account for the image noise and lighting variation that typically occurs across an image. NLAD is designed to separate image noise and background from artifacts thereby providing the ability to consistently evaluate images. The decomposition techniques used in this algorithm are based on the concepts of mathematical morphology. NLAD emulates the human capability of visually separating an image into different levels of resolution components, denoted as ''coarse'', ''fine'', and ''intermediate''. Very little resolution information overlaps any two of the component images. This method can easily determine and/or remove trends and noise from an image. NLAD has several additional advantages over conventional image processing algorithms, including no need for a transformation from one space to another, such as is done with Fourier transforms, and since only finite summations are required, the calculational effort is neither extensive nor complicated.

A measurement of the spin of the {Omega}{sup -} hyperon produced through the exclusive process {Xi}{sub c}{sup 0} {yields} {Omega}{sup -}K{sup +} is presented using a total integrated luminosity of 116 fb{sup -1} recorded with the BABAR detector at the e{sup +}e{sup -} asymmetric-energy B-Factory at SLAC. Under the assumption that the {Xi}{sub c}{sup 0} has spin 1/2, the angular distribution of the {Lambda} from {Omega}{sup -} {yields} {Lambda}K{sup -} decay is inconsistent with all half-integer {Omega}{sup -} spin values other than 3/2. Lower statistics data for the process {Omega}{sub c}{sup 0} {yields} {Omega}{sup -}{pi}{sup +} from a 230 fb{sup -1} sample are also found to be consistent with {Omega}{sup -} spin 3/2. If the {Xi}{sub c}{sup 0} spin were 3/2, an {Omega}{sup -} spin of 5/2 cannot be excluded.

In the damping rings of the International Linear Collider (ILC), the resistive-wall instability is one of the dominant transverse instabilities. This instability directly influences the choice of material and aperture of the vacuum pipe, and the parameters of the transverse feedback system. This paper investigates the resistive-wall instabilities in an ILC damping ring under various conditions of beam pipe material, aperture, and fill pattern.

The equilibrium of an infinitely long, strongly magnetized, non-neutral plasma confined in a Penning-Malmberg trap with an additional mirror coil has been solved analytically [J. Fajans, Phys. Plasmas 10, 1209 (2003)] and shown to exhibit unusual features. Particles not only reflect near the mirror in the low field region, but also may be weakly trapped in part of in the high field region. The plasma satisfies a Boltzmann distribution along field lines; however, the density and the potential vary along field lines. Some other simplifying assumptions were employed in order to analytically characterize the equilibrium; for example the interface region between the low and high field regions was not considered. The earlier results are confirmed in the present study, where two-dimensional particle-in-cell simulations are performed with the Warp code in a more realistic configuration with an arbitrary (but physical) density profile, realistic trap geometry and magnetic field. A range of temperatures and radial plasma sizes are considered. Particle tracking is used to identify populations of trapped and untrapped particles. The present study also shows that it is possible to obtain local equilibria of non-neutral plasmas using a collisionless PIC code, by a scheme that uses the inherent numerical collisionality as …

We have achieved {approx}30 psec single-photoelectron and {approx}12ps for multi-photoelectron timing resolution with a new 64 pixel Burle MCP-PMT with 10 micron microchannel holes. We have also demonstrated that this detector works in a magnetic field of 15kG, and achieved a single-photoelectron timing resolution of better than 60 psec. The study is relevant for a new focusing DIRC RICH detector for particle identification at future Colliders such as the super B-factory or ILC, and for future TOF techniques. This study shows that a highly pixilated MCP-PMT can deliver excellent timing resolution.

Soft x-ray microscopy has now achieved 15 nm spatial resolution with new zone plates and bending magnet radiation. Combined with elemental sensitivity and flexible sample environment (applied magnetic or electric fields, wet samples, windows, overcoatings) this emerges as a valuable tool for nanoscience and nanotechnology, complimenting common electron and scanning tip microscopies. In this presentation we describe recent advances in spatial resolution, expectations for the near future, and applications to magnetic materials, bio-tomography, etc.

We present the first collective x-ray scattering measurements of plasmons in solid-density plasmas. The forward scattering spectra of a laser-produced narrow-band x-ray line from isochorically heated beryllium show that the plasmon frequency is a sensitive measure of the electron density. Dynamic structure calculations that include collisions and detailed balance match the measured plasmon spectrum indicating that this technique will enable new applications to determine the equation of state and compressibility of dense matter.

Water that forms the Florida Current, and eventually the Gulf Stream, coalesces in the Caribbean from both subtropical and equatorial sources. The equatorial sources are made up of, in part, South Atlantic water moving northward and compensating for southward flow at depth related to meridional overturning circulation. Subtropical surface water contains relatively high amounts of radiocarbon ({sup 14}C), whereas equatorial waters are influenced by the upwelling of low {sup 14}C water and have relatively low concentrations of {sup 14}C. We use a 250-year record of {Delta}{sup 14}C in a coral from southwestern Puerto Rico along with previously published coral {Delta}{sup 14}C records as tracers of subtropical and equatorial water mixing in the northern Caribbean. Data generated in this study and from other studies indicate that the influence of either of the two water masses can change considerably on interannual to interdecadal time scales. Variability due to ocean dynamics in this region is large relative to variability caused by atmospheric {sup 14}C changes, thus masking the Suess effect at this site. A mixing model produced using coral {Delta}{sup 14}C illustrates the time varying proportion of equatorial versus subtropical waters in the northern Caribbean between 1963 and 1983. The results of the …

We present a comprehensive wavelength survey of Fe L-shell X-ray lines between 7 and 11 {angstrom} measured using flat crystal spectrometers and the EBIT-I and EBIT-II electron beam ion traps at the Lawrence Livermore National Laboratory. This survey includes all significant emission lines produced by over 200 n {yields} 2 transitions in Fe XIX-XXIV, with n = 4-10. The identification and assignment of transitions are made with the help of detailed theoretical modeling using the Flexible Atomic Code (FAC).

A simple method to estimate the atomic degree Hessian matrixof a nanosystem is presented. The estimated Hessian matrix, based on themotif decomposition of the nanosystem, can be used to accelerate abinitio atomic relaxations with speedups of 2 to 4 depending on the sizeof the system. In addition, the programing implementation for using thismethod in a standard ab initio package is trivial.

In theories with multiple vacua, reheating to a temperature greater than the height of a barrier can stimulate transitions from a desirable metastable vacuum to a lower energy state. We discuss the constraints this places on various theories and demonstrate that in a class of supersymmetric models this transition does not occur even for arbitrarily high reheating temperature.

If the cosmic dark matter consists of weakly-interacting massive particles, these particles should be produced in reactions at the nextgeneration of high-energy accelerators. Measurements at these accelerators can then be used to determine the microscopic properties of the dark matter. From this, we can predict the cosmic density, the annihilation cross sections, and the cross sections relevant to direct detection. In this paper, we present studies in supersymmetry models with neutralino dark matter that give quantitative estimates of the accuracy that can be expected. We show that these are well matched to the requirements of anticipated astrophysical observations of dark matter. The capabilities of the proposed International Linear Collider (ILC) are expected to play a particularly important role in this study.

This report summarizes a study of possible neutron detection technologies for performing prompt (n,2n) measurements on radioactive targets of the type that could be made at the Rare Isotope Accelerator (RIA). The report recommends conducting further research on high-pressure {sup 3}He gas scintillators as it is the best candidate technology. These detectors meet the requirements of a fast response time (fall times around 5-10 ns), gamma ray suppression, (all gamma rays below about 900 keV can be easily discriminated against), and can be easily configured into a 4{pi} array. The one requirement that these detectors fall short is efficiency, but less than a factor of 10 improvement is needed. The possibility of pulse shape discrimination should also be explored for these detectors as this would help to distinguish gamma rays above 900 keV from neutrons. In addition to R&amp;D work on these detectors, Monte Carlo simulations and target development are also recommended areas of further study.

None

On July 7th 2006, the Purple Level-1 Review Committee convened and was presented with evidence of the completion of Level-2 Milestone 461 (Deploy First Phase of I/O Infrastructure for Purple) which was performed in direct support of the Purple Level-1 milestone. This evidence included a short presentation and the formal documentation of milestone No.461 (see UCRL-TR-217288). Following the meeting, the Committee asked for the following additional evidence: (1) Set a speed measurement/goal/target assuming a number of files that the user needs to get into the archives. Then redo the benchmark using whatever tool(s) the labs prefer (HTAR, for example). Document how long the process takes. (2) Develop a test to read files back to confirm that what the user gets out of the archive is what the user put into the archive. This evidence has been collected and is presented here.