This sampling and analysis plan (SAP) identifies the type, quantity, and quality of data needed to support characterization of the sludge that remains in Tank 241-2-361. The procedures described in this SAP are based on the results of the 241-2-361 Sludge Characterization Data Quality Objectives (DQO) (BWHC 1999) process for the tank. The primary objectives of this project are to evaluate the contents of Tank 241-2-361 in order to resolve safety and safeguards issues and to assess alternatives for sludge removal and disposal.

None

Luminosity in the LHC will depend critically on the alignment of the triplet quadrupoles. These quadrupoles are closest to the interaction points (IPs), have large gradients and the {beta} functions have their largest values within these quadrupoles. Within a triplet, the cold masses of the Q1 and Q3 quadrupoles will be housed in separate cryostats while Q2a and Q2b will be placed in a single cryostat. The absolute alignments of Q1, Q3 and the Q2a/Q2b pair with respect to the desired axes will be determined during installation. The relative alignment of Q2a and Q2b however will be fixed once they are placed in their common cryostat at Fermilab. In this note, we examine the required relative alignment tolerances of Q2a and Q2b. An early study of some alignment tolerances was done by Weisz [1].

The authors present a preliminary analysis and design framework developed for the evaluation and optimization of infrared, Imaging Spatial Heterodyne Spectrometer (SHS) electro-optic systems. Commensurate with conventional interferometric spectrometers, SHS modeling requires an integrated analysis environment for rigorous evaluation of system error propagation due to detection process, detection noise, system motion, retrieval algorithm and calibration algorithm. The analysis tools provide for optimization of critical system parameters and components including : (1) optical aperture, f-number, and spectral transmission, (2) SHS interferometer grating and Littrow parameters, and (3) image plane requirements as well as cold shield, optical filtering, and focal-plane dimensions, pixel dimensions and quantum efficiency, (4) SHS spatial and temporal sampling parameters, and (5) retrieval and calibration algorithm issues.

Safe interim dry storage of spent nuclear fuel (SNF) must be maintained for a minimum of twenty years according to the Code of Federal Regulations. The most important variable that must be regulated by dry storage licensees in order to meet current safety standards is the temperature of the SNF. The two currently accepted models to define the maximum allowable initial storage temperature for SNF are based on the diffusion controlled cavity growth (DCCG) failure mechanism proposed by Raj and Ashby. These models may not give conservative temperature limits. Some have suggested using a strain-based failure model to predict the maximum allowable temperatures, but we have shown that this is not applicable to the SNF as long as DCCG is the assumed failure mechanism. Although the two accepted models are based on the same fundamental failure theory (DCCG), the researchers who developed the models made different assumptions, including selection of some of the most critical variables in the DCCG failure equation. These inconsistencies are discussed together with recommended modifications to the failure models based on more recent data.

The growth and properties of undoped and Mn-doped ZnGa{sub 2}O{sub 4} thin-film phosphors on (100) MgO and glass substrates using pulsed laser ablation were investigated. Blue-white and green emission were observed for as-deposited undoped and Mn-doped films, respectively. Luminescent properties as well as crystallinity were considerably affected by processing conditions and film stoichiometry. Films with enhanced luminescent characteristics were obtained on single crystal substrates without post-annealing.

The Anticipatory System (AS) formalism developed by Robert Rosen provides some insight into the problem of embedding intelligent behavior in machines. AS emulates the anticipatory behavior of biological systems. AS bases its behavior on its expectations about the near future and those expectations are modified as the system gains experience. The expectation is based on an internal model that is drawn from an appeal to physical reality. To be adaptive, the model must be able to update itself. To be practical, the model must run faster than real-time. The need for a physical model and the requirement that the model execute at extreme speeds, has held back the application of AS to practical problems. Two recent advances make it possible to consider the use of AS for practical intelligent sensors. First, advances in transducer technology make it possible to obtain previously unavailable data from which a model can be derived. For example, acoustic emissions (AE) can be fed into a Bayesian system identifier that enables the separation of a weak characterizing signal, such as the signature of pump cavitation precursors, from a strong masking signal, such as a pump vibration feature. The second advance is the development of extremely fast, …

This document identifies administrative controls that are established for the operating contractor of the B Plant facility during the B Plant surveillance and maintenance phase. When approved by the DOE-RL, this document is part of the B Plant safety authorization basis. Look for the associated B Plant Surveillance and Maintenance Phase Safety Analysis Report, HNF-3358.

Two instances of research facilities responding to public scrutiny will be discussed. The first concerns emissions from a �tritium labeling facility� operated at Lawrence Berkeley National Laboratory (LBNL); the second deals with releases of plutonium from Lawrence Livermore National Laboratory (LLNL). There are many parallels between these two cases, both of which are still ongoing. In both, the national laboratory is the acknowledged source of low-level (by regulatory standards) radioactive contamination in the community. A major purpose of both investigations is to determine the degree of the contamination and the threat it poses to public health and the environment. The examining panel or committee is similarly constituted in the two cases, including representatives from all four categories of stakeholders: decision makers; scientists and other professionals doing the analysis/assessment; environmental activist or public interest groups; and �ordinary� citizens (nearly everyone else not in one or more of the first three camps). Both involved community participation from the beginning. The levels of outrage over the events triggering the assessment are comparable; though �discovered� or �appreciated� only a few years ago, the release of radiation in both cases occurred or began occurring more than a decade ago. The meetings have been conducted in …

The beam-beam interaction in the Tevatron produces the betatron tune spread in each bunch and a bunch-to-bunch tune spread. The tune spread sets limits on bunch intensity and luminosity. The beam-beam e#11;ects for antiprotons are usually more severe since the proton bunch population is higher. The beam-beam e#11;ects for antiprotons can in principle be compensated with the use of an electron beam with a corresponding charge density. The status of studies of possibilities of the beam-beam compensation is reviewed in this paper.

Sputter-deposited W-based contacts on p-GaN (N{sub A} {approximately} 10{sup 18} cm{sup {minus}3}) display non-ohmic behavior independent of annealing temperature when measured at 25 C. The transition to ohmic behavior occurs above {approximately} 250 C as more of the acceptors become ionized. The optimum annealing temperature is {approximately} 700 C under these conditions. These contacts are much more thermally stable than the conventional Ni/Au metallization, which shows a severely degraded morphology even at 700 C. W-based contacts may be ohmic as-deposited on very heavily doped n-GaN, and the specific contact resistance improves with annealing up to {approximately} 900 C.

Federal Emergency Management Information System (FEMIS) Bill of Materials (BOM) for FEMIS Version 1.4.6

We derive a compact expression for the Borel sum of a QCD amplitude in terms of the inverse Mellin transform of the corresponding Borel function. The result allows us to investigate the momentum-plane analyticity properties of the Borel-summed Green functions in perturbative QCD. An interesting connection between the asymptotic behavior of the Borel transform and the Landau singularities in the momentum plane is established. We consider for illustration the polarization function of massless quarks and the resummation of one-loop renormalon chains in the large-{beta}{sub 0} limit, but our conclusions have a more general validity.

Measurements of dielectric breakdown during high-field electrical stress are typically performed at or near room temperature via constant voltage or current stress methods. In this summary they explore whether useful information might also be obtained by performing current measurements during a temperature ramp at high electric field.

The authors have directly measured the stress evolution during metal organic chemical vapor deposition of AlGaN/GaN heterostructures on sapphire. In situ stress measurements were correlated with ex situ microstructural analysis to directly determine a critical thickness for cracking and the subsequent relaxation kinetics of tensile-strained Al{sub x}Ga{sub 1{minus}x}N on GaN. Cracks appear to initiate the formation of misfit dislocations at the AlGaN/GaN interface, which account for the majority of the strain relaxation.

Accurate estimation of the depth of partial-thickness burns and the early prediction of a need for surgical intervention are difficult. A non-invasive technique utilizing the difference in thermal relaxation time between burned and normal skin may be useful in this regard. In practice, a thermal camera would record the skin's response to heating or cooling by a small amount-roughly 5 C for a short duration. The thermal stimulus would be provided by a heat lamp, hot or cold air, or other means. Processing of the thermal transients would reveal areas that returned to equilibrium at different rates, which should correspond to different burn depths. In deeper thickness burns, the outside layer of skin is further removed from the constant-temperature region maintained through blood flow. Deeper thickness areas should thus return to equilibrium more slowly than other areas. Since the technique only records changes in the skin's temperature, it is not sensitive to room temperature, the burn's location, or the state of the patient. Preliminary results are presented for analysis of a simulated burn, formed by applying a patch of biosynthetic wound dressing on top of normal skin tissue.

The TESTCLK module was specifically designed for use in prototyping crates for the Colliding Detector Facility (CDF) Run 2 Experiment at Fermi National Accelerator Laboratory. The TESTCLK Module allows the user to supply system clocks and trigger signals to stand-alone crates. This module has allowed designers of the CDF Run 2 electronics to thoroughly test their modules, despite the lack of a DAQ system supplied clock and trigger interface. This paper will explore the features that were found important to incorporate into the TESTCLK, and describe how they were implemented. The paper will also describe how the TESTCLK module has been used to support the initial implementation of the DAQ system at CDF. This has allowed data taking and testing of CDF Electronic modules before production clock and trigger modules became available.

Enhancer of gene silencing 1 (egs1) is an Arabidopsis mutant that enhances post-transcriptional gene silencing of the rolB gene introduced by genetic engineering (transgene). The goal of our proposal was cloning EGS1 based on its map position. Although we screened more than 2000 chromosomes for recombination, we were unable to get closer than 2 cM to the gene. We experienced an unexpected tendency of the post-transcriptionally silenced transgene to switch to a more stable silenced state. This made it impossible to select egs1 homozygotes for map based cloning. This forced us to reconsider our cloning strategy. One possibility would have been to use a different transgene as the target of gene silencing. We tested two other transgenes. Both encoded proteins unrelated to the first but they were all expressed from the same type of promoter and they all had a similar tendency to become post-transcriptionally silenced. After screening over 80 F2 segregants from each cross between our egs1 mutant and Arabidopsis of the same ecotype homozygous for the new transgene, we were disappointed to find that the egs1 mutation did not enhance post-transcription silencing of the two new genes. In 80 plants we expected to have between 4 and 6 …

Epitaxial thin films of the Tl cuprate superconductors Tl{sub 2}Ba{sub 2}CaCu{sub 2}O{sub 8}, Tl{sub 2}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}, and TL{sub 0.78}Bi{sub 0.22}Ba{sub 0.4}Sr{sub 1.6}Ca{sub 2}Cu{sub 3}O{sub 9{minus}{delta}} are studied with x-ray photoemission spectroscopy. These data, together with previous measurements in this lab of Tl{sub 2}Ba{sub 2}CuO{sub 6+{delta}} and TlBa{sub 2}CaCu{sub 2}O{sub 7{minus}{delta}}, comprise a comprehensive data set for a comparative study of Tl cuprates with a range of chemical and electronic properties. In the Cu 2p spectra, a larger energy separation between the satellite and main peaks (E{sub s}-E{sub m}) and a lower intensity ratio (I{sub s}/I{sub m}) are found to correlate with higher values of T{sub c}. Analysis of these spectra within a simple configuration interaction model suggests that higher values of T{sub c} are related to low values of the O 2p {r_arrow} Cu 3d charge transfer energy. In the O 1s region, a smaller bond length between Ba and Cu-O planar oxygen is found to correlate with a lower binding energy for the signal associated with Cu-O bonding, most likely resulting from the increased polarization screening by Ba{sup 2+} ions. For samples near optimum doping, maximum T{sub c} is observed to occur when the Tl 4f{sub …

Recently there has been an increasing demand to perform real-time in-situ chemical detection of hazardous materials, contraband chemicals, and explosive chemicals. Currently, real-time chemical detection requires rather large analytical instrumentation that are expensive and complicated to use. The advent of inexpensive mass produced MEMS (micro-electromechanical systems) devices opened-up new possibilities for chemical detection. For example, microcantilevers were found to respond to chemical stimuli by undergoing changes in their bending and resonance frequency even when a small number of molecules adsorb on their surface. In our present studies, we extended this concept by studying changes in both the adsorption-induced stress and photo-induced stress as target chemicals adsorb on the surface of microcantilevers. For example, microcantilevers that have adsorbed molecules will undergo photo-induced bending that depends on the number of absorbed molecules on the surface. However, microcantilevers that have undergone photo-induced bending will adsorb molecules on their surfaces in a distinctly different way. Depending on the photon wavelength and microcantilever material, the microcantilever can be made to bend by expanding or contracting the irradiated surface. This is important in cases where the photo-induced stresses can be used to counter any adsorption-induced stresses and increase the dynamic range. Coating the surface of the …

A new industry-led partnership with the US Department of Energy is strengthening the US chemical industry's competitive position and furthering national economic goals. This document describes how the partnership is promoting advanced technologies that optimize energy efficiency in operations and reduce waste and energy-related emissions.

A chemiluminescent homogeneous immunoassay and a hand-size multiassay reader are described that could be used for detecting biological materials. The special feature of the assay is that it employs two different antibodies that each bind to a unique epitope on the same antigen. Each group of epitope-specific antibodies has linked to it an enzyme of a proximal-enzyme pair. One enzyme of the pair utilizes a substrate in high concentration to produce a second substrate required by the second enzyme. This new substrate enables the second enzyme to function. The reaction of the second enzyme is configured to produce light. This chemiluminescence is detected with a charge-coupled device (CCD) camera. The proximal pair enzymes must be in close proximity to one another to allow the second enzyme to react with the product of the first enzyme. This only occurs when the enzyme-linked antibodies are attached to the antigen, whether antigen is a single protein with multiple epitopes or the surface of a cell with a variety of different antigens. As a result of their juxtaposition, the enzymes produce light only in the presence of the biological material. A brief description is given as to how this assay could be utilized in …

This Test Plan provides a test method to dedicate the leak detection relays used on the new Pumping and Instrumentation Control (PIC) skids. The new skids are fabricated on-site. The leak detection system is a safety class system per the Authorization Basis.

The stress-strain responses of a half-hardened copper and an annealed tantalum as a function of temperature and strain-rate were investigated. The rate-dependent yield stress and work-hardening behavior were described satisfactorily by the Mechanical Threshold Strength (MTS) model which is based on thermally-activated plasticity and evolution. Excellent agreement was obtained comparing experiments and calculations of Taylor cylinder impact tests.