Novel 3+1 dimensional N = 2 superconformal field theories (with tensionless BPS string solitons) are believed to arise when two sets of M5 branes intersect over a 3+1 dimensional hyperplane. We derive a DLCQ description of these theories as supersymmetric quantum mechanics on the Higgs branch of suitable 4d N = 1 supersymmetric gauge theories. Our formulation allows us to determine the scaling dimensions of certain chiral primary operators in the conformal field theories. We also discuss general criteria for quantum mechanical DLCQ descriptions of supersymmetric field theories (and the resulting multiplicities and scaling dimensions of chiral primary operators).

The analysis of archived Crystal River-3 feedwater flow data reveals a slow and steady degradation of the flow meter measurements during the 1992/1993 operating cycle. MSET can reliably estimate the true flow rate and quantify the degree of departure between the indicated signal and the true flow rate with high accuracy. The MSET computed flow rate could, in principle, be used to provide an improved estimate of the reactor power and hence avoid the revenue loss associated with derating the reactor based on a faulty feedwater flow rate indication.

Advances in the processing and fabrication of Ag-sheathed (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (Bi-2223) high-T{sub c} superconductors by the powder-in-tube technique continue to bring this material closer to commercial applications. Enhancement of the transport critical current density (J{sub c}) of Ag-sheathed Bi-2223 tapes was achieved by increasing the packing density of the precursor powder, improving mechanical deformation, and adjusting the cooling rate. Long lengths (>150 m) of multifilamentary Bi-2223 tapes have been fabricated and carry critical currents (I{sub c}) of >50 A (J{sub c} {approx} 25 kA/cm{sup 2}) at 77 K in self-field. A 1260-m-long tape carried an I{sub c} of 18 A (J{sub c} {approx} 12 kA/cm{sup 2}) from end-to-end. Several prototype coils have been assembled from these long-length tapes. Recent progress in the fabrication of Bi-2223 tapes is presented in this paper.

The conclusions of this report are that molybdenum can effectively be separated from uranium and plutonium using TRU-Resin; and that separation of the {sup 99}Mo from the actinides will reduce the analyst's exposure and simplify analysis for the actinide elements.

Many irradiation effects in Fe-Cr-Ni alloys such as radiation-induced segregation, radiation-enhanced diffusion, and void swelling are known to vary with bulk alloy composition. The development of microstructural and microchemical changes during irradiation and during post-irradiation annealing is determined by the rate of diffusion of point defects and alloying elements. To accurately predict the changes in grain boundary chemistry due to radiation-induced segregation and post-irradiation annealing, the composition dependence of diffusion parameters, such as the migration energy, must be known. A model has been developed which calculates migration diffusivity. The advantages of this calculational method are that a single set of input parameters can be used for a wide range of bulk alloy compositions, and the effects of local order can easily be incorporated into the calculations. A description of the model is presented, and model calculations are compared to segregation measurements from seven different iron-chromium-nickel alloys, irradiated with protons to doses from 0.1 to 3.0 dpa at temperatures between 200 C and 600 C. Results show that segregation trends can be modeled using a single set of input parameters with the difference between model calculation and measurement being less than 5 at%, but usually less than 2 at%. Additionally, model …

We have measured the steady state concentration of gas phase C{sub 2} in Ar/H{sub 2}/CH{sub 4} and Ar/H{sub 2}/C{sub 60} microwave plasmas used for the deposition of nanocrystalline diamond films. High sensitivity white light absorption spectroscopy is used to monitor the C{sub 2} density using the d{sup 3}II {l_arrow} A{sup 3}II (0,0) vibrational band of C{sub 2} as chamber pressure, microwave power, substrate temperature and feed gas mixtures are varied in both chemistries. Understanding how these parameters influence the C{sub 2} density in the plasma volume provides insight into discharge mechanisms relevant to the deposition of nanocrystalline diamond.

Following earlier investigations on the dissociation rates of halogen containing molecules, we studied the thermal decompositions of CHCl{sub 3} and CF{sub 3}Br. In addition, we measured the branching ratio and rate constants for the thermal decomposition of H{sub 2}CO. We studied three bimolecular rate processes: H + H{sub 2}CC0, CF{sub 3} + H{sub 2}, and H + CF{sub 3}H. Decomposition studies in reflected shock waves on three reactions were completed using atomic resonance absorption spectroscopic (ARAS) detection and/or the laser schlieren density gradient (LS) method.

For many years, Sandia National Laboratories has been involved in the development and application of rapid prototyping and dmect fabrication technologies to build prototype parts and patterns for investment casting. Sandia is currently developing a process called Laser Engineered Net Shaping (LENS~) to fabricate filly dense metal parts dwectly from computer-aided design (CAD) solid models. The process is similar to traditional laser-initiated rapid prototyping technologies such as stereolithography and selective laser sintering in that layer additive techniques are used to fabricate physical parts directly from CAD data. By using the coordinated delivery of metal particles into a focused laser beam apart is generated. The laser beam creates a molten pool of metal on a substrate into which powder is injected. Concurrently, the substrate on which the deposition is occurring is moved under the beam/powder interaction zone to fabricate the desired cross-sectiwal geometry. Consecutive layers are additively deposited, thereby producing a three-dmensional part. This process exhibits enormous potential to revolutionize the way in which metal parts, such as complex prototypes, tooling, and small-lot production parts, are produced. The result is a comple~ filly dense, near-net-shape part. Parts have been fabricated from 316 stainless steel, nickel-based alloys, H13 tool steel, and titanium. …

In direct laser metal deposition technologies, such as the Laser (LENS) process, it is important to understand and control the Engineered Net Shaping thermal behavior during fabrication. With this control, components can be reliably fabricated with desired structural material properties. This talk will describe the use of contact and imaging techniques to monitor the thermal signature during LENS processing. Recent results show a direct correlation between thermal history and material properties, where the residual stress magnitude decreases as the laser power, and therefore thermal signature, increases. Development of an understanding of solidification behavior, residual stress, and microstructural evolution with respect to thermal behavior will be discussed.

Laser ablation is effective both as an analytical tool and as a means of removing surface coatings. The elemental composition of surfaces can be determined by either mass spectrometry or atomic emission spectroscopy of the atomized effluent. Paint can be removed from aircraft without damage to the underlying aluminum substrate, and environmentally damaged buildings and sculptures can be restored by ablating away deposited grime. A recent application of laser ablation is the removal of radioactive contaminants from the surface and near-surface regions of concrete. We present the results of ablation tests on concrete samples using a high power pulsed Nd:YAG laser with fiber optic beam delivery. The laser-surface interaction was studied on various model systems consisting of Type I Portland cement with varying amounts of either fine silica or sand in an effort to understand the effect of substrate composition on ablation rates and mechanisms. A sample of non-contaminated concrete from a nuclear power plant was also studied. In addition, cement and concrete samples were doped with non-radioactive isotopes of elements representative of cooling waterspills, such as cesium and strontium, and analyzed by laser-resorption mass spectrometry to determine the contamination pathways. These samples were also ablated at high power to …

A number of physics problems can be modeled by a set of N elements, which have pair-wise interactions with one another. The use of such elements for the evolution of vorticity in fluid flows and the calculation of the velocity field from the evolving vorticity field is well known. Fast multipole methods for fluid flow problems have been developed in we pmt to reduce computational effort to something less than O(N) . In this paper we develop a fast multipole solver with application to both 3-D radiation problems (calculation of the heat flux from the evolving temperature field in an absorbing medium) and 3-D fluid flow. This is accomplished by using a more general kernel for the associated volume integrals. This kernel also encompasses other applications such as gravitational fields, electrostatics, scattering, etc. The present algorithm has been designed to have a very high "parallel efficiency" when used on massively parallel computers. This feature comes at the expense of computational effort, which is less than O(N) but greater than O(N) or O(MnN).

A series of electroactive spinel compounds, LiMn{sub 2{minus}x}Cu{sub x}O{sub 4} (0.1 {le} x {le} 0.5) has been studied by crystallographic, spectroscopic and electrochemical methods and by electron-microscopy. These LiMn{sub 2{minus}x}Cu{sub x}O{sub 4} spinels are nearly identical in structure to cubic LiMn{sub 2}O{sub 4} and successfully undergo reversible Li intercalation. The electrochemical data show a remarkable reversible electrochemical process at 4.9 V which is attributed to the oxidation of Cu{sup 2+} to Cu{sub 3+}. The inclusion of Cu in the spinel structure enhances the electrochemical stability of these materials upon cycling. The initial capacity of LiMn{sub 2{minus}x}Cu{sub x}O{sub 4} spinels decreases with increasing x from 130mAh/g in LiMn{sub 2}O{sub 4} (x=0) to 70 mAh/g in ''LiMn{sub 1.5}Cu{sub 0.5}O{sub 4}'' (x=0.5). The data also show slight shifts to higher voltage for the delithiation reaction that normally occurs at 4.1 V in standard Li{sub 1{minus}x}Mn{sub 2}O{sub 4} electrodes (1 {ge} x {ge} 0) corresponding to the oxidation of Mn{sup 3+} to Mn{sup 4+}. Although the powder X-ray diffraction pattern of ''LiMn{sub 1.5}Cu{sub 0.5}O{sub 4}'' shows a single-phase spinel product, neutron diffraction data show a small, but significant quantity of an impurity phase, the composition and structure of which could not be identified. X-ray …

In 1996, Argonne National Laboratory (ANL) conducted a preliminary technical and legal evaluation of disposing of nonhazardous oil-field wastes (NOW) into salt caverns. Argonne determined that if caverns are sited and designed well, operated carefully, closed properly, and monitored routinely, they could be suitable for disposing of oil-field wastes. On the basis of these findings, Argonne subsequently conducted a preliminary evaluation of the possibility that adverse human health effects (carcinogenic and noncarcinogenic) could result from exposure to contaminants released from the NOW disposed of in domal salt caverns. Steps used in this evaluation included the following: identifying potential contaminants of concern, determining how humans could be exposed to these contaminants, assessing contaminant toxicities, estimating contaminant intakes, and calculating human cancer and noncancer risk estimates. Five postclosure cavern release scenarios were assessed. These were inadvertent cavern intrusion, failure of the cavern seal, failure of the cavern through cracks, failure of the cavern through leaky interbeds, and a partial collapse of the cavern roof. Assuming a single, generic, salt cavern and generic oil-field wastes, potential human health effects associated with constituent hazardous substances (arsenic, benzene, cadmium, and chromium) were assessed under each of these scenarios. Preliminary results provided excess cancer risk and …

Evapotranspiration is an essential component of the surface hydrological balance, but obtaining accurate estimates of the water vapor flux over large terrestrial areas can be difficult because of the substantial temporal and spatial variability in surface moisture conditions that can occur. This variability is often very large in the Great Plains and other portions of the Mississippi River Basin. Nevertheless, variations in soil moisture content, groundwater levels, and runoff in streams and rivers cannot be fully assessed without some knowledge of evapotranspiration rates. Here, observations made at the Walnut River Watershed (WRW), which is near Wichita, Kansas, and has an area of approximately 5000 km{sup 2}, are used to improve and test a modeling system that estimates long-term evapotranspiration with use of satellite remote sensing data with limited surface measurements. The techniques may be applied to much larger areas. As is shown in Fig. 1, the WRW is located in the Red River Basin and is enclosed by the southern Great Plains Clouds and Radiation Testbed (CART) of the US Department of Energy's Atmospheric Radiation Measurement (ARM) program. The functional relationships involving the satellite data, surface parameters, and associated subgrid-scale fluxes are modeled in this study by the parameterization of …

High voltage TEMs were introduced commercially thirty years ago, with the installations of 500 kV Hitachi instruments at the Universities of Nagoya and Tokyo. Since that time 53 commercial instruments, having maximum accelerating potentials of 0.5-3.5 MV, will have been delivered by the end of 1998. Table 1 summarizes the sites and some information regarding those HVEMS which are available in 1998. This corrects, updates and expands an earlier report of this sort [2]. There have been three commercial HVEM manufacturers: AEI (UK), Hitachi and JEOL (Japan). The proportion of the total number of HVEMS produced by each manufacturer is similar to that reflected in Table 1: AEI and Kratos/AEI (12), Hitachi (20) and JEOL (21). The term Kratos/AEI refers to instruments delivered after the takeover of AEI by Grates in the late 1970's. In Table 1 only maximum accelerating potentials are listed, which is generally also the design value for which the resolution for imaging was optimized. It is important to realize that in many applications, especially those studying irradiation effects, much lower voltages may be employed somewhat routinely to minimize atom displacements by the incident electron beam during analysis. These minimum values range from 100 kV for the …

As part of the China-MAP program, sponsored by the US National Aeronautics and Space Administration, regional inventories of air pollutants emitted in China are being characterized, in order that the atmospheric chemistry over China can be more fully understood and the resulting ambient concentrations in Chinese cities and the deposition levels to Chinese ecosystems be determined with better confidence. In addition, the contributions of greenhouse gases from China and of acidic aerosols that counteract global warming are being quantified. This paper presents preliminary estimates of the emissions of some of the major air pollutants in China: sulfur dioxide (SO{sub 2}), nitrogen oxides (NO{sub x}), carbon monoxide (CO), and black carbon (C). Emissions are estimated for each of the 27 regions of China included in the RAINS-Asia simulation model and are subsequently distributed to a 1{degree} x 1{degree} grid using appropriate disaggregation factors. Emissions from all sectors of the Chinese economy are considered, including the combustion of biofuels in rural homes. Emissions from larger power plants are calculated individually and allocated to the grid accordingly. Data for the period 1990-1995 are being developed, as well as projections for the future under alternative assumptions about economic growth and environmental control.

This paper describes the application of an electrical network characterization method to an optimization model that is designed to simulate subarea-level energy transactions. The network characterization method determines subarea clusters of system buses that electrically respond to perturbations in a very similar manner. The method produces a reduced number of transmission constraints and preserves parallel path representations. The least-cost, linear programming (LP) formulation takes advantage of data reduction techniques to simplify model transmission constraints, while supporting parallel path system characteristics and energy tagging of subarea transactions. An overview of the proposed method describes the problem domain and key model features. The paper then presents two model applications that illustrate generator siting and line overload screening analyses.

The magnitudes of both void swelling and radiation-induced segregation (RIS) in iron-chromium-nickel alloys are dependent on bulk alloy composition. Because the diffusivity of nickel via the vacancy flux is slow relative to chromium, nickel enriches and chromium depletes at void surfaces during irradiation. This local composition change reduces the subsequent vacancy flux to the void, thereby reducing void swelling. In this work, the resistance to swelling from major element segregation is estimated using diffusivities derived from grain boundary segregation measurements in irradiated iron-chromium-nickel alloys. The resistance to void swelling in iron- and nickel-base alloys correlates with the segregation and both are functions of bulk alloy composition. Alloys that display the greatest amount of nickel enrichment and chromium depletion are found to be most resistant to void swelling, as predicted. Additionally, swelling is shown to be greater in alloys in which the RIS profiles are slow to develop.

This appendix contains all source code for the RTProE system. The following file contents are included: pdb.h; hgen.l; hgen.y; igen.l; igen.y; pdm.l; pdm.y; rtdata.l; rtdata.y; framegen.c; librt.c; librt.h; rtsched.c; build.tsh; sde.tcl; rtsched.def.

In this paper is described tests of EiChrom Industries' Ni-selective ion exchange resin for use in analysis of Ni-63 in Savannah River Site high level waste.

This short course includes information on these topics and subtopics: (I) Nuclear Properties: (A) Historic roots; (B) Nomenclature; (C) Nuclear Stability and abundance; (D) Uses of isotopic techniques; (II) Instrumentation: (A) Sources; (B) Mass resolving elements; (C) Detectors; (III) Making Isotopic Measurements by ICP-MS: (A) Deadtime Correction; (B) Mass Discrimination; (C) Signal /Noise considerations; (IV) Applications and examples: (A) Isotope dilution; (B) Double Spike; (C) Biological Application; (D) Environmental Application; (E) Geological.

A radioactive ion beam facility - in short a RIB facility - produces ions of short-lived nuclei and accelerates them to energies of 0.1�10 MeV per nucleon or even higher. In this process it is important that the resulting RIB beams are free from nuclei of neighboring isobars or of neighboring elements. This task requires the production and ionization of the nuclei of interest as well as separating them from all others with a high-mass resolving power and small-mass cross contaminations. When constructing such a facility it also is very important to find ways that allow the accelerated ions to be provided to different experiments at least quasi simultaneously.

A variety of microscopic techniques are employed to characterize fluence limiting defects in hafnia/silica multilayer coatings manufactured for the National Ignition Facility.

Negative-parity excitations in the 2.5 MeV region in {sup 112}Cd have been investigated with the (n,n`{gamma}) reaction. Several of these states exhibit enhanced B(E2) values for L decay to the 3{sub 1}{sup -} octupole state, indicative of quadrupole-octupole coupled (2{sup +} {circle_times} 3{sup -}) structures. The B(E1) values observed are typically in the range of 1-5 x 1O{sup -4} W u , irrespective of the final state.