Thin film samples of a simple embedded nanocluster system consisting of solid Xe precipitates in Al have been subjected to 1 MeV electron irradiation in a high-voltage electron microscope. High-resolution images have been recorded on videotape in order to monitor the changes to the system resulting from the passage of electrons through the film. Inspection of the video recordings (in some cases frame-by-frame) reveals that complex, rapid processes occur under the electron beam. These include, movement of small clusters, coalescence of neighboring clusters, shape changes, the apparent melting and resolidification of the Xe, and the creation and annealing of extended defects within the Xe lattice. A tentative interpretation of some of the observations is presented in terms of the electron-induced displacement processes at the surface of the clusters.

Innovative, cost-effective technologies that have a positive life-cycle environmental impact and yield marketable products are needed to meet the challenges of the recycling industry. Four materials-recovery technologies that are being developed at Argonne National Laboratory in cooperation with industrial partners are described in this paper: (1) dezincing of galvanized steel scrap; (2) material recovery from auto-shredder residue; (3) high-value-plastics recovery from obsolete appliances; and (4) aluminum salt cake recycling. These technologies are expected to be applicable to the production of low-cost, high-quality raw materials from a wide range of waste streams.

The Department of Energy (Department) has spent at least $76 million annually for field contractor employee support in Headquarters and other Federal agencies. The employees were to provide technical expertise and experience critical to Department operations and programs. Overall, the audit was performed to determine if the Department was managing the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, it was to determine whether the Department reviews and evaluates the costs for the use of contractor employees, is reimbursed for contractors working at other Federal agencies, and had implemented corrective actions proposed as the result of a prior audit report on this subject. The Department did not effectively manage the use of field contractor employees assigned to Headquarters and other Federal agencies. Specifically, the Department was unable to identify all contractor employees assigned to the Washington, DC area or determine the total cost of maintaining them; some employees were providing routine support and administrative services rather than unique program expertise; and several of the Department`s contractors had assigned their employees to work in other agencies without receiving full reimbursement for their services. In addition, the Department did not fully implement the corrective actions it agreed …

Argonne National Laboratory has developed a composite ceramic waste form for the disposition of high level radioactive waste produced during electrometallurgical conditioning of spent nuclear fuel. The electrorefiner LiCl/KCl eutectic salt, containing fission products and transuranics in the chloride form, is contacted with a zeolite material which removes the fission products from the salt. After salt contact, the zeolite is mixed with a glass binder. The zeolite/glass mixture is then hot isostatic pressed (HIPed) to produce the composite ceramic waste form. The ceramic waste form provides a durable medium that is well suited to incorporate fission products and transuranics in the chloride form. Presented are preliminary results of the process qualification and characterization studies, which include chemical and physical measurements and product durability testing, of the ceramic waste form.

Preliminary research in our laboratory has demonstrated that boric acid is an effective lubricant with an unusual capacity to reduce sliding fiction (providing friction coefficients as low as 0.02) and wear of metallic and ceramic materials. More recent studies have revealed that water or methanol solutions of boric acid can be used to prepare strongly bonded layers of boric acid on aluminum surfaces. It appears that boric acid molecules have a strong tendency to bond chemically to the naturally oxidized surfaces of aluminum and its alloys and to make these surfaces very slippery. Recent metal formability tests indicated that the boric acid films formed on aluminum surfaces by spraying or dipping worked quite well; improving draw scale performance by 58 to 75%. These findings have increased the prospect that boric acid can be formulated and optimized as an effective boundary lubricant and used to solve the friction, galling, and severe wear problems currently encountered in cold-forming of aluminum products. Accordingly, the major goal of this paper is to demonstrate the usefulness and lubrication capacity of thin boric acid films formed on aluminum surfaces by simple dipping or spraying processes and to describe the lubrication mechanisms under typical metal forming conditions. …

This paper presents results from our on-going efforts to characterize semiconductor thin films for direct x-ray conversion. We deposit these thin films onto an amorphous silicon (a-Si:H) readout array with the overall goal of developing a large area x-ray detector for protein crystallography, and for other x-ray imaging fields.

Ceramic matrix composites are being developed for numerous high temperature applications, including rotors and combustors for advanced turbine engines, heat exchanger and hot-gas filters for coal gasification plants. Among the materials of interest are silicon-carbide-fiber-reinforced-silicon-carbide (SiC{sub (f)}/SiC), silicon-carbide-fiber-reinforced-silicon-nitride (SiC{sub (f)}/Si{sub 3}N{sub 4}), aluminum-oxide-reinforced-alumina (Al{sub 2}O{sub 3(f)}/Al{sub 2}O{sub 3}), etc. In the manufacturing of these ceramic composites, the conditions of the fiber/matrix interface are critical to the mechanical and thermal behavior of the component. Defects such as delaminations and non-uniform porosity can directly effect the performance. A nondestructive evaluation (NDE) method, developed at Argonne National Laboratory has proved beneficial in analyzing as-processed conditions and defect detection created during manufacturing. This NDE method uses infrared thermal imaging for fill-field quantitative measurement of the distribution of thermal diffusivity in large components. Intensity transform algorithms have been used for contrast enhancement of the output image. Nonuniformity correction and automatic gain control are used to dynamically optimize video contrast and brightness, providing additional resolution in the acquired images. Digital filtering, interpolation, and least-squares-estimation techniques have been incorporated for noise reduction and data acquisition. The Argonne NDE system has been utilized to determine thermal shock damage, density variations, and variations in fiber coating in a full …

Engineering development and testing of the SRTALK solvent extraction process are discussed in this paper. This process provides a way to carry out alkaline-side removal and recovery of technetium in the form of pertechnetate anion from nuclear waste tanks within the DOE complex. The SRTALK extractant consists of a crown ether, bis-4,4'(5')[(tert-butyl)cyclohexano] -18-crown-6, in a modifier, tributyl phosphate, and a diluent, Isopar{reg_sign}L. The SRTALK flowsheet given here separates technetium from the waste and concentrates it by a factor often to minimize the load on the downstream evaporator for the technetium effluent. In this work, we initially generated and correlated the technetium extraction data, measured the dispersion number for various processing conditions, and determined hydraulic performance in a single-stage 2-cm centrifugal contactor. Then we used extraction-factor analysis, single-stage contactor tests, and stage-to-stage process calculations to develop a SRTALK flowsheet. Key features of the flowsheet are (1) a low organic-to-aqueous (O/A) flow ratio in the extraction section and a high O/A flow ratio in the strip section concentrate the technetium and (2) the use of a scrub section to reduce the salt load in the concentrated technetium effluent. Finally, the SRTALK process was evaluated in a multistage test using a synthetic tank …

In this paper, we review some of the work our group has done in the past few years to obtain the electron self-energy of high temperature superconductors by analysis of angle-resolved photoemission data. We focus on three examples which have revealed: (1) a d-wave superconducting gap, (2) a collective mode in the superconducting state, and (3) pairing correlations in the pseudogap phase. In each case, although a novel result is obtained which captures the essence of the data, the conventional physics used leads to an incomplete picture. This indicates that new physics needs to be developed to obtain a proper understanding of these materials.

The effect of dissolved oxygen level on fatigue life of austenitic stainless steels is discussed and the results of a detailed study of the effect of the environment on the growth of cracks during fatigue initiation are presented. Initial test results are given for specimens irradiated in the Halden reactor. Impurities introduced by shielded metal arc welding that may affect susceptibility to stress corrosion cracking are described. Results of calculations of residual stresses in core shroud weldments are summarized. Crack growth rates of high-nickel alloys under cyclic loading with R ratios from 0.2-0.95 in water that contains a wide range of dissolved oxygen and hydrogen concentrations at 289 and 320 C are summarized.

We present results on the magnetic reversal process in epitaxial Sm-Co (1{bar 1}00)/TM (TM = Fe, Co) bilayer films prepared via magnetron sputtering onto Cr-buffered single-crystal MgO substrates. The magnetically hard Sm-Co films have 20-T uniaxial anisotropy and coercivities >3 T at room temperature. The magnetization of the soft layer is pinned at the interface to the hard-magnet layer and switches reversibly as expected for an exchange-spring magnet. With increasing soft layer thickness, the coercive field of the hard layer becomes significantly less than that of a single layer. We also present numerical solutions of a one-dimensional model that provide the spin configuration for each atomic layer. Comparison of the experimental results with the model simulations indicates that the exchange-spring behavior of our bilayer films can be understood from the intrinsic parameters of the hard and soft layers.

The Advanced Photon Source third generation synchrotrons light source needs a stabilized particle beam position to produce high brightness and low emittance radiation. Global orbit correction control is introduced and is utilized to satisfy the demanding needs of the accelerator. This paper presents the experimental results for determining an effective and optimal controller to meet the global orbit correction requirements. These requirements include frequency/time domain demands consisting of vibrational noise attenuation, limiting of controller gains for stability and improving the system time response. Experiments were conducted with a digital signal processor implementing various PID sets to make comparisons between simulations and experiments. Measurements at these PID sets supported the results of software simulation.

The HERMES Laser-Driven Target Task Force (Argonne, Erlangen and Illinois) is charged with developing a polarized H/D target for use in the HERA ring at DESY. Rapid progress was made in the beginning of 1996, leading us to the decision to test the target in a realistic experimental environment. In particular, polarizations of 0.6 and flows above 10{sup 18} atoms{center_dot}s{sup {minus}1} have been achieved on the bench. The laser-driven target and a simple detector system are currently installed in Cooler storage ring at the Indiana University Cyclotron Facility in order to test its applicability to nuclear physics experiments. Target polarizations are being measured using the {rvec H}(p, p) and {rvec D}(p, p) reactions. Initial tests were reasonably successful and the target is well along toward becoming viable for nuclear physics.

Epitaxial Fe wedges with a thickness gradation from 0--20 {angstrom} were grown on diamond(100) at room temperature, subsequently annealed, and investigated with reflection high-energy electron diffraction and the surface magneto-optical Kerr effect. The results indicate that for <5 monolayer thicknesses the Fe grows on C(100) as smooth, epitaxial fcc films, which are not ferromagnetic, but that thicker films undergo a transition to become rough and the ordinary bcc ferromagnetic phase.

In a round robin effort between the US Nuclear Regulatory Commission, Institut de Protection et de Surete Nucleaire in France, and the Russian Research Centre-Kurchatov Institute, Argonne National Laboratory conducted 16 modified ring stretch tensile tests on unirradiated samples of Zr-1Nb cladding, which is used in Russian VVER reactors. Tests were conducted at two temperatures (25 and 400 C) and two strain rates (0.001 and 1 s{sup {minus}1}). At 25 C and 0.001 s{sup {minus}1}, the yield strength (YS), ultimate tensile strength (UTS), uniform elongation (UE), and total elongation (TE) were 201 MPa, 331 MPa, 18.2%, and 57.6%, respectively. At 400 C and 0.001 s{sup {minus}1}, the YS, UTS, UE, and TE were 109 MPa, 185 MPa, 15.4%, and 67.7%, respectively. Finally, at 400 C and 1 s{sup {minus}1}, the YS, UTS, UE, and TE were 134 MPa, 189 MPa, 18.9%, and 53.4%, respectively. The high strain rate tests at room temperature were not successful. Test results proved to be very sensitive to the amount of lubrication used on the inserts; because of the large contact area between the inserts and specimen, too little lubrication leads to significantly higher strengths and lower elongations being reported. It is also important to …

This report contains information on field and laboratory work performed between August 15th and November 15th at site S-7 in IC 34, at McClellan AFB. At this location, a Vadose Zone Monitoring System (VZMS) (LBNL, 1996) is currently being used to collect subsurface data including hydraulic potential, soil gas pressure, moisture content, water chemistry, gas chemistry, and temperature.

None

One waste sample was analyzed (with duplicate, matrix spike, and matrix spike duplicate) for PCBs as Aroclor mixtures by the Inorganic/Organic Chemistry Group. A soxhlet extraction procedure was used for extraction of the Aroclors from the sample. Analysis was performed using dual column confirmation gas chromatography/electron capture detection (GC/ECD). Extraction follows closely method 354 C of SW-846, analysis follows SW-846 method 8082. A cross reference of laboratory sample number to the customer identification is given in a table.

Glass-bonded zeolite is being considered as a candidate ceramic waste form for storing radioactive isotopes separated from spent nuclear fuel in the electrorefining process. To determine the stability of glass-bonded zeolite under irradiation, transmission electron microscope samples were irradiated using high energy helium, lead, and krypton. The major crystalline phase of the waste form, which retains alkaline and alkaline earth fission products, loses its long range order under both helium and krypton irradiation. The dose at which the long range crystalline structure is lost is about 0.4 dpa for helium and 0.1 dpa for krypton. Because the damage from lead is localized in such a small region of the sample, damage could not be recognized even at a peak damage of 50 dpa. Because the crystalline phase loses its long range structure due to irradiation, the effect on retention capacity needs to be further evaluated.

The structure and electrochemical potential of monoclinic Li{sub 1+x}V{sub 3}O{sub 8} were calculated within the local-density-functional-theory framework by use of plane-wave-pseudopotential methods. Special attention was given to the compositions 1+x=1.2 and 1+x=4, for which x-ray diffraction structure refinements are available. The calculated low-energy configuration for 1+x=4 is consistent with the three Li sites identified in x-ray diffraction measurements and predicts the position of the unobserved Li. The location of the tetrahedrally coordinated Li in the calculated low-energy configuration for 1+x=1.5 is consistent with the structure measured by x-ray diffraction for Li{sub 1.2}V{sub 3}O{sub 8}. Calculations were also performed for the two monoclinic phases at intermediate Li compositions, for which no structural information is available. Calculations at these compositions are based on hypothetical Li configurations suggested by the ordering of vacancy energies for Li{sub 4}V{sub 3}O{sub 8} and tetrahedral site energies in Li{sub 1.5}V{sub 3}O{sub 8}. The internal energy curves for the two phases cross near 1+x=3. Predicted electrochemical potential curves agree well with experiment.

The National Ignition Facility (NIF) Program proposes to provide additional access to the Kirschbaum Field construction laydown area. This additional access would alleviate traffic congestion at the East Gate entrance to Lawrence Livermore National Laboratory (LLNL) from Greenville Road during periods of heavy construction for the NIF. The new access would be located along the northeastern boundary of LLNL, about 305 m (1,000 ft) north of the East Gate entrance. The access road would extend from Greenville Road to the Kirschbaum Field construction laydown area and would traverse an existing storm water drainage channel. Two culverts, side by side, and a compacted road base would be installed across the channel. The security fence that runs parallel to Greenville Road would be modified to accommodate this new entrance and a vehicle gate would be installed at the entrance of Kirschbaum Field. The exiting shoulder along Greenville Road would be converted into a new turn lane for trucks entering the new gate. This analysis evaluates the impacts of constructing the Kirschbaum Field bridge and access gate at a different location than was analyzed in the NIF Project specific Analysis in the Final Programmatic environmental Impact Statement for Stockpile Stewardship and Management (SS …

We study the complexity and the efficient approximability of graph and satisfiability problems when specified using various kinds of periodic specifications studied. The general results obtained include the following: (1) We characterize the complexities of several basic generalized CNF satisfiability problems SAT(S) [Sc78], when instances are specified using various kinds of 1- and 2-dimensional periodic specifications. We outline how this characterization can be used to prove a number of new hardness results for the complexity classes DSPACE(n), NSPACE(n), DEXPTIME, NEXPTIME, EXPSPACE etc. These results can be used to prove in a unified way the hardness of a number of combinatorial problems when instances are specified succinctly using various succient specifications considered in the literature. As one corollary, we show that a number of basic NP-hard problems because EXPSPACE-hard when inputs are represented using 1-dimensional infinite periodic wide specifications. This answers a long standing open question posed by Orlin. (2) We outline a simple yet a general technique to devise approximation algorithms with provable worst case performance guarantees for a number of combinatorial problems specified periodically. Our efficient approximation algorithms and schemes are based on extensions of the ideas and represent the first non-trivial characterization of a class of problems having …

TOF-VIS, Software for Interactive Exploration of Time-of-Flight Data TOF-VIS is a fast, highly interactive program for examining time-of-flight neutron scattering data. All spectra from an experiment are displayed simultaneously as an image. The data can be displayed in terms of time-of-flight, energy, wave-vector, or lattice spacing. TOF-VIS has beer? used for examining data from IPNS and ISIS, and has been useful for diagnosing problems with instruments and detectors as well as for making a quick evaluation of the quality of the data. Hard copy output to a variety of devices using routines built on PGPLOT is now available. TOF-VIS is portable to VMS and UNIX, and is currently implemented primarily using object-based methods in This report was prepared as an account of work sponsored by an agency of the US Government. Neither the US Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does …

This V and V Report includes analysis of two revisions of the DMS [data management system] System Requirements Specification (SRS) and the Preliminary System Design Document (PSDD); the source code for the DMS Communication Module (DMSCOM) messages; the source code for selected DMS Screens, and the code for the BWAS Simulator. BDM Federal analysts used a series of matrices to: compare the requirements in the System Requirements Specification (SRS) to the specifications found in the System Design Document (SDD), to ensure the design supports the business functions, compare the discreet parts of the SDD with each other, to ensure that the design is consistent and cohesive, compare the source code of the DMS Communication Module with the specifications, to ensure that the resultant messages will support the design, compare the source code of selected screens to the specifications to ensure that resultant system screens will support the design, compare the source code of the BWAS simulator with the requirements to interface with DMS messages and data transfers relating to the BWAS operations.